1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. This camera is designed for robust outdoor surveillance applications, offering high-definition video capture and advanced features for comprehensive monitoring.
2. Ọja Ipariview
The Pelco P2230L-ESR is a high-performance Pan-Tilt-Zoom (PTZ) dome camera engineered for demanding outdoor environments. Key features include:
- Sensọ: 1/3-inch CMOS Sensor with 1920 x 1080 resolution.
- Lẹnsi: 4.3 mm ~ 129 mm varifocal lens with 30x optical zoom.
- Infrared (IR) Illumination: Up to 150 meters range with proportional brightness based on zoom level.
- Ibiti Yiyipo (WDR): 100 dB for clear images in challenging lighting conditions.
- Ṣiṣe koodu fidio: Supports H.265, H.264, and MJPEG formats.
- Iwọn fireemu: Up to 60 images per second (ips) at Full HD 1080p.
- Idaabobo Ayika: Idiyele IP66 ti o ni aabo oju ojo fun lilo ita gbangba.
- Iwari: Sabotage and simple motion detection capabilities.
- Ibiti Pan/Títẹ̀: Tilt range from +15° to –90° degrees.
- Iṣe Imọlẹ Kekere: Operates down to 0.3 lux.
Figure 2.1: Pelco P2230L-ESR PTZ Network Outdoor Dome Camera. This image displays the camera's dome form factor with its white upper housing and dark lower camera module.
3. Eto
3.1. Fifi sori ti ara
The P2230L-ESR camera is designed for outdoor installation and features an IP66 weatherproof rating. Ensure the mounting surface is stable and capable of supporting the camera's weight. The mounting type is optional, allowing for various installation methods depending on your specific requirements. Refer to the separate installation guide for detailed mounting instructions and hardware requirements.
3.2. Electrical and Network Connections
Connect the camera to a power source (AC/DC) and your network. The camera supports both wired (RJ45) and wireless (Wi-Fi) connectivity. For wired connections, use a standard Ethernet cable. For wireless connections, ensure the camera is within range of your Wi-Fi network.
Figure 3.1: RJ45 Ethernet Cable. This image shows a blue Ethernet cable with clear RJ45 connectors, typically used for wired network connections.
After physical installation and connection, proceed with network configuration using the Pelco software or web interface to assign an IP address and configure network settings.
4. Awọn ilana Iṣiṣẹ
4.1. Ipilẹ isẹ
The camera's Pan-Tilt-Zoom (PTZ) functions can be controlled remotely. Utilize the 30x optical zoom to focus on specific areas of interest. The tilt mechanism allows for a range of +15° to –90° degrees, providing flexible viewing awọn igun.
4.2. Video Abojuto ati Gbigbasilẹ
The P2230L-ESR captures video at 2MP resolution, delivering Full HD 1080p video at up to 60 images per second. Video can be recorded in MJPEG, MP4, H.264, or H.265 formats. Configure recording settings, including resolution, frame rate, and storage options, through the camera's interface.
4.3. Awọn ẹya ara ẹrọ ti ilọsiwaju
- Imọlẹ IR: The integrated 850 nm IR illuminators provide clear night vision up to 150 meters. The brightness adjusts proportionally with the zoom level to ensure optimal illumination.
- Ibiti Yiyipo (WDR): The 100 dB WDR feature compensates for extreme lighting variations, ensuring details are visible in both bright and dark areas of the scene.
- Motion and Sabotage Iwari: Configure the camera to detect motion within specified zones or to alert you to attempts to obstruct or tamper with the camera (sabotage iwari).
5. Itọju
Itọju deedee n ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati igba pipẹ kamẹra rẹ:
- Fifọ lẹnsi: Periodically clean the camera lens with a soft, lint-free cloth and a mild lens cleaning solution. Avoid abrasive materials.
- Ayewo Ile: Inspect the camera housing for any signs of damage or wear, especially seals, to maintain its IP66 rating.
- Awọn Isopọ USB: Verify that all power and network cables are securely connected and free from damage.
- Awọn imudojuiwọn sọfitiwia: Check the Pelco website for firmware updates to ensure your camera has the latest features and security enhancements.
6. Laasigbotitusita
If you encounter issues with your camera, consider the following common troubleshooting steps:
- Ko si Agbara: Ensure the power supply is correctly connected and functioning. Check power cables for damage.
- Ko si Isopọ Nẹtiwọọki: Verify Ethernet cable connection or Wi-Fi signal strength. Check network settings and IP address configuration.
- Didara Aworan Ko dara: Clean the lens. Adjust focus and zoom settings. Check for obstructions. Ensure sufficient lighting or proper IR illumination.
- PTZ Not Responding: Check network connectivity and control method settings. Ensure no physical obstructions are impeding movement.
For persistent issues, consult the Pelco support webojula tabi olubasọrọ imọ support.
7. Awọn pato
Detailed technical specifications for the Pelco P2230L-ESR camera:
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | P2230L-ESR |
| Sensọ | 1/3-inch CMOS |
| Ipinnu Yaworan fidio | 2MP (1920 x 1080) |
| Lẹnsi | 4.3 mm ~ 129 mm varifocal |
| Sun-un Optical | 30x |
| IR Ran | Ti o de 150 m |
| Ibiti Dynamic jakejado (WDR) | 100 dB |
| Iwọn fireemu | Up to 60 ips (1080p) |
| Fidio fifi koodu | H.265, H.264, MJPEG |
| Asopọmọra Technology | Wireless (Wi-Fi), Wired (RJ45) |
| Orisun agbara | AC/DC |
| International Idaabobo Rating | IP66 |
| Ọna Iṣakoso | Latọna jijin |
| Iru Itaniji | Išipopada Nikan |
| inu ile / ita gbangba Lilo | Ita gbangba |
Figure 7.1: Dimensional Drawing of Pelco P2230L-ESR. This diagram provides various views and measurements (in inches and millimeters) of the camera's physical dimensions, useful for installation planning.
8. Atilẹyin ọja ati Support
For specific warranty information, please refer to the documentation provided with your purchase or visit the official Pelco website. Technical support can be accessed through the manufacturer's customer service channels, typically found on their webojula tabi nipasẹ rẹ ni aṣẹ onisowo.
