Ọja Pariview
The Scheppach HS250L SE is a powerful 2000W table saw designed for precise cutting of various wood materials. It features a laser cutting guide for accuracy, a robust stand, and extendable table surfaces for handling larger workpieces. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your table saw.
Image: The Scheppach HS250L SE Table Saw, shown with its integrated stand and two included saw blades. This view highlights the main components of the saw, including the table, blade guard, and control panel.
Awọn Itọsọna Aabo
Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the Scheppach HS250L SE table saw. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE), pẹlu awọn gilaasi ailewu, aabo igbọran, ati iboju boju eruku.
- Rii daju pe agbegbe iṣẹ jẹ mimọ, tan-an daradara, ati laisi awọn idiwọ.
- Jeki awọn ọmọde ati awọn aladuro kuro ni agbegbe iṣẹ.
- Ma ṣe ṣiṣẹ awọn ri ni damp tabi awọn ipo tutu.
- Always unplug the saw before making adjustments, changing blades, or performing maintenance.
- Use a push stick when cutting small workpieces.
- Ensure the blade guard is always in place and functioning correctly.
Ṣeto
Proper assembly and setup are crucial for the performance and safety of your table saw.
Unpacking ati ayewo
- Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
- Check for any shipping damage or missing parts. Refer to the included parts list.
- Danu awọn ohun elo iṣakojọpọ ni ifojusọna.
Apejọ ti Iduro
Assemble the robust stand according to the diagrams provided in the full manual. Ensure all bolts and fasteners are securely tightened for stability.
Image: The Scheppach HS250L SE Table Saw fully assembled on its stable stand, demonstrating its robust construction and non-slip rubber feet for high stability during operation.
Attaching Table Extensions
The table saw includes additional table extensions for both the left and right sides. Attach these extensions to expand your working surface, which is particularly useful for larger workpieces.
Aworan: A sunmọ-soke view of the Scheppach HS250L SE Table Saw, showing the table extension in use. This feature allows for processing larger workpieces by providing an extended support surface.
Blade fifi sori
The saw comes with two Ø 254 mm carbide saw blades. Ensure the saw is unplugged before installing or changing blades. Follow the directional arrows on the blade and the saw for correct orientation.
Laser Guide Setup
The integrated laser cutting guide requires batteries (included). Install the batteries and test the laser alignment. Adjust if necessary to ensure it accurately indicates the cutting line.
Awọn ilana Iṣiṣẹ
Familiarize yourself with the controls and functions before beginning any cutting operations.
Titan / Pipa agbara
- Connect the power cable to a suitable 230V electrical outlet.
- Press the green "ON" button to start the saw.
- Press the red "OFF" button to stop the saw.
Adjusting Cutting Depth and Angle
The saw allows for precise adjustments of cutting depth and angle:
- Ijinle Ige: Use the depth adjustment mechanism to set the desired cutting depth. Maximum cutting depth at 90° is 87 mm, and at 45° is 55 mm.
- Igun Ige: The swiveling cross stop can be adjusted from -45° to 45° for miter cuts.
Image: A diagram illustrating the maximum cutting heights of the Scheppach HS250L SE Table Saw at 90° (87 mm) and 45° (55 mm). It also shows the table extension capability and the ergonomic table height of 870 mm.
Ṣiṣe Awọn gige
Always ensure the workpiece is securely supported and guided. Use the rip fence for straight cuts and the miter gauge for angled cuts. Engage the laser guide for enhanced accuracy.
Image: A person demonstrating the use of the Scheppach HS250L SE Table Saw, highlighting the ergonomic working posture enabled by the 870 mm table height. The user is guiding a wooden board through the saw.
Ohun elo Examples
The Scheppach HS250L SE is suitable for various cutting tasks on wood, including:
- Cutting beams
- Cutting profile awọn lọọgan
- Cutting general boards
- Performing rip cuts (longitudinal cuts)
- Performing miter cuts (angled cuts)
Image: A diagram illustrating various cutting applications for the Scheppach HS250L SE Table Saw, including cutting beams, profile boards, and general boards, as well as demonstrating rip cuts and miter cuts.
Itoju
Itọju deedee n ṣe idaniloju pe o pẹ to ati pe o le ṣiṣẹ lailewu fun tabili rẹ.
- Ninu: After each use, unplug the saw and clean off sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
- Ayẹwo abẹfẹlẹ: Regularly inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately.
- Lubrication: Periodically lubricate moving parts as indicated in the full manual to ensure smooth operation.
- Okun Itanna: Ṣàyẹ̀wò okùn agbára fún àmì ìbàjẹ́ èyíkéyìí. Má ṣe lo gígún tí okùn náà bá ti bàjẹ́ tàbí tí ó bá ti bàjẹ́.
Laasigbotitusita
Abala yii n ṣalaye awọn ọran ti o wọpọ ti o le ba pade pẹlu wiwa tabili rẹ.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Rin ko bẹrẹ | No power supply; tripped circuit breaker; faulty switch | Check power connection; reset circuit breaker; contact service for switch replacement. |
| Blade ko gige laisiyonu | Dull or damaged blade; incorrect blade installation; improper feed rate | Replace blade; ensure correct blade orientation; adjust feed rate. |
| Gbigbọn ti o pọju | Loose components; damaged blade; unstable stand | Tighten all fasteners; replace damaged blade; ensure stand is on a level surface. |
| Itọsọna lesa ko ṣiṣẹ | Dead batteries; laser lens obstructed | Replace batteries; clean laser lens. |
For issues not listed here, please consult the comprehensive troubleshooting guide in the full product manual or contact Scheppach customer support.
Awọn pato
Key technical specifications for the Scheppach HS250L SE Table Saw:
- Awoṣe: HS250L SE
- Olupese: Schepach
- Nọmba apakan: 21682 / 83882
- Orisun Agbara: Okun itanna
- Voltage: 230 folti
- Wattage: 2000 Watt
- Opin Abẹfẹ: 254 mm
- Nọmba ti Eyin: 24 (per included blade)
- O pọju. Ijinle gige ni 90°: 87 mm
- O pọju. Ijinle gige ni 45°: 55 mm
- Swiveling Cross Stop: -45° si 45°
- Table Height (Ergonomic): 870 mm
- Ìwúwo: 21.95 kg
- Awọn eroja to wa: 2 saw blades, extra table extension left and right, laser cutting guide (incl. batteries)
Atilẹyin ọja ati Support
For detailed information regarding warranty coverage, technical support, or spare parts, please refer to the official Scheppach webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
Akiyesi: Awọn ofin ati ipo atilẹyin ọja le yatọ nipasẹ agbegbe.
