Ọrọ Iṣaaju
Thank you for choosing the Serta Waterproof Heated Mattress Pad. This product is designed to provide warmth and comfort, enhancing your sleep experience during colder seasons. Its waterproof feature also protects your mattress from spills and accidents, ensuring a clean and fresh sleeping environment. Please read this manual thoroughly before use to ensure safe and optimal operation.
Alaye Aabo pataki
Your safety is paramount. This Serta heated mattress pad is ETL certified and has been independently tested to meet the highest safety standards. Please adhere to the following guidelines:
- ṢE ṢE leave the controller covered when in use to avoid overheating.
- ṢE ṢE use this heated product on waterbeds, bunk beds, adjustable mechanical beds, or children's cribs and beds.
- ṢE ṢE use with damaged cords or plugs. If the cord or plug is damaged, contact customer support immediately.
- ṢE ṢE use if the mattress pad is wet.
- Always ensure the mattress pad is properly secured to the mattress to prevent shifting.
- Keep pets away from the electrical components to prevent damage.
- Yọọ kuro nigbati o ko ba wa ni lilo tabi ṣaaju ṣiṣe mimọ.
Ọja Awọn ẹya ara ẹrọ
- Ohun elo Ailokun: Cotton blend waterproof material protects against spills and accidents.
- 10 Eto Ooru: Customizable warmth levels for personalized comfort.
- Aago Pipa Aifọwọyi: Adjustable 1-12 hour timer for safety and energy efficiency.
- Deep Pocket Design: Fits mattresses up to 17 inches thick with 360° elastic for a secure fit.
- Dual Control (Queen and Larger Sizes): Two controllers for independent temperature adjustment on each side of the bed.
- Ẹrọ fifọ: Rọrun lati nu ati ṣetọju.
- Ifọwọsi ETL: Ó pàdé àwọn ìlànà ààbò gíga.
Awọn ilana iṣeto
- Ṣí Páàdì Matiresi náà sílẹ̀: Carefully remove the heated mattress pad from its packaging.
- Gbe paadi naa: Lay the mattress pad flat on your mattress with the heating elements facing up. Ensure the connector cord is positioned at the head or foot of the bed, away from where you sleep, to avoid discomfort.
- Ṣe aabo paadi naa: The deep elastic pocket is designed to fit mattresses up to 17 inches. Stretch the elasticized skirt over the corners and sides of your mattress for a snug and secure fit.
Image: A person securing the Serta Heated Mattress Pad onto a mattress, highlighting the deep elastic pockets that fit up to 17-inch mattresses. - Darapọ mọ Alakoso: Locate the connector on the mattress pad and firmly plug in the controller cord. Ensure a secure connection.
Image: Close-up of the Serta controller, showing the 11 ft controller cord, 10 heat setting levels with LCD display, and adjustable 1-12 hour auto shut-off timer. - So sinu Agbara: So okùn agbára náà mọ́ inú ihò iná mànàmáná 120V/60Hz tí ó wà déédéé. ṢE ṢE use with extension cords or power strips.
- For Queen and Larger Sizes: These sizes come with two controllers for dual-zone temperature capability. Connect each controller to its respective side of the mattress pad and plug both into separate outlets if possible, or ensure the power strip can handle the load.
Video: Demonstrates the setup and features of the Serta Electric Mattress Pad, including how it fits on a bed and the controller functionality.
Awọn ilana Iṣiṣẹ
- Tan-an: Press the power button on the controller to turn on the mattress pad. The LCD display will illuminate.
- Ṣatunṣe Eto Ooru: Use the "+" and "-" buttons to select your desired heat level from 1 to 10. Start with a lower setting and adjust as needed for comfort.
- Ṣètò Aago Títìpa Àìfọwọ́sí: Use the "Timer" button to set the auto shut-off duration from 1 to 12 hours, in 1-hour increments. The pad will automatically turn off after the selected time.
- Ṣaaju alapapo: For optimal warmth, turn on the mattress pad 15-30 minutes before getting into bed.
- Paa: Press the power button again to turn off the mattress pad. It is recommended to turn off the pad when not in use.
Video: Demonstrates the operation of a heated mattress pad controller, including setting heat levels and timers. Note: This video is from a related product, but demonstrates similar controller functionality.
Itoju ati Itọju
Proper care ensures the longevity and performance of your Serta Heated Mattress Pad.
Awọn ilana fifọ:
- Ge asopọ: Always disconnect the power cord and controller(s) from the mattress pad before washing.
- Pre-soak (Optional): For heavily soiled areas, pre-soak the pad in cold water for 15 minutes.
- Fọ ẹrọ: Wash by hand or use a delicate cycle in a washing machine with cold water and minimal detergent.
- Fi omi ṣan: Fi omi tutu wẹ́ dáadáa.
- Sẹ́ẹ̀lì Ìyípo: Yọ kuro lẹsẹkẹsẹ lẹhin iyipo iyipo lati ṣe idiwọ creasing.
- MAA ṢE BILECH.
Awọn ilana gbigbe:
- Tumble Gbẹ: Tumble dry on low or medium heat for no more than 5 minutes.
- Afẹfẹ Gbẹ Yọ damp bedding from the dryer, gently stretch, and hang to finish drying.
- ṢE ṢE hang with clothespins, as this can damage the heating wires.
- MA ṢE LỌ AṢỌ.
- Ṣayẹwo Awọn okun: Periodically check and straighten any bent or twisted wires to preserve shape and functionality.
