1. Ifihan
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your LaView LV-D01-R Electronic Deadbolt Lock. Please read this guide thoroughly before installation and use to ensure proper function and security.
Figure 1: LaView LV-D01-R Electronic Deadbolt Lock (Exterior and Interior Units)
2. Atokọ fifi sori ẹrọ tẹlẹ
Before beginning installation, ensure your door meets the following specifications:
- Iwọn Ilẹkun Ilẹkun: 2-1/8 inches (54 mm).
- Ibẹrẹ: Adjustable to either 2-3/8 inches (60 mm) or 2-3/4 inches (70 mm).
- Opin Iho Ilẹkun eti: 1 inch (25 mm).
- Sisanra ilekun: 1-3/8 inches to 2 inches (35 mm to 50 mm).
If drilling is required, refer to the provided cutout template in your product packaging.
Figure 2: Door Measurement and Component Diagram
3. Itọsọna fifi sori ẹrọ
Tẹle awọn igbesẹ wọnyi fun fifi sori aṣeyọri:
- Adjust Latch (if necessary): The latch can be adjusted for 2-3/8" (60mm) or 2-3/4" (70mm) backsets. Rotate and pull the backset as instructed to extend the latch if needed.
- Fi sori ẹrọ Latch: Insert the latch into the door edge hole. Ensure the latch plate is flush with the door edge and secure with screws.
- Fi sori ẹrọ Apejọ Ita: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
- Fi sori ẹrọ Plate iṣagbesori: So awo fifi sori inu mọ apa ode nipa lilo awọn skru ti a pese.
- Awọn okun Sopọ: Carefully connect the cable from the exterior assembly to the interior assembly.
- Fi sori ẹrọ Apejọ inu inu: Attach the interior assembly to the mounting plate, ensuring the thumb turn spindle engages correctly. Secure with screws.
- Fi Awọn batiri sii: Fi awọn batiri AA 4 sinu yara batiri naa.
- Iṣiṣẹ Idanwo: Test the lock with the default master code and the physical key to ensure smooth operation.
4. Programming and Operation
The default master PIN code is 12345678. For security, you will be prompted to change this code before adding any other user codes.
4.1 Yi koodu titunto si
To change the master code:
- Tẹ **.
- Enter the current master code (default: 12345678).
- Tẹ #.
- Tẹ 1.
- Tẹ #.
- Enter your new master code (4-10 digits).
- Tẹ #.
- Re-enter your new master code to verify.
- Tẹ # to store the new master code.
A green indicator light confirms successful setting; a red light indicates failure.
4.2 Fi Àwọn Kóòdù Olùlò kún un
You can program up to 20 unique user codes (4-10 digits) for family and friends.
- Tẹ **.
- Tẹ koodu titunto si sii.
- Tẹ #.
- Tẹ 2.
- Tẹ #.
- Enter a new user code (4-10 digits).
- Tẹ #.
- Re-enter the new user code to verify.
- Tẹ # to store the user code.
4.3 Add One-Time Codes
One-time codes are useful for temporary access and expire after a single use.
- Tẹ **.
- Tẹ koodu titunto si sii.
- Tẹ #.
- Tẹ 7.
- Tẹ #.
- Enter a new one-time code (4-10 digits).
- Tẹ #.
- Re-enter the new one-time code to verify.
- Tẹ # to add the one-time code.
The one-time code will expire after unlocking the lock once.
4.4 Enable/Disable Auto-Lock
The Auto-Lock function automatically locks the door after 30 seconds of inactivity. It is disabled by default.
- To Enable Auto-Lock: Tẹ ** + Titunto si koodu + # + 51 + #.
- To Disable Auto-Lock: Tẹ ** + Titunto si koodu + # + 52 + #.
Figure 3: Auto-Lock Feature
4.5 Enable Vacation Mode
Vacation mode provides enhanced security when you are away. If the lock is unlocked by key or thumb turn in this mode, it will beep for 1 minute.
- Tẹ **.
- Tẹ koodu titunto si sii.
- Tẹ #.
- Tẹ 6.
- Tẹ # to enable Vacation Mode.
To disable Vacation Mode, repeat the same steps.
4.6 Key Override
The lock includes a physical key override for manual access, especially useful if batteries are depleted.
Figure 4: Key Override for Manual Access
5. Itọju
5.1 Batiri Rirọpo
The lock is powered by 4 AA batteries. A low battery indicator will alert you when replacement is needed.
Figure 5: Low Battery Alert
To replace batteries, remove the interior cover, replace the old batteries with new ones, and reattach the cover.
5.2 Ninu
Fọ ìta titiipa naa pẹlu asọ rirọ, damp asọ. Yago fun abrasive ose tabi olomi ti o le ba ipari tabi itanna irinše.
6. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Olupese | LaView |
| Nọmba awoṣe | LV-D01-R |
| Ọja Mefa | 17.78 x 12.7 x 10.16 cm |
| Iwọn Nkan | 454 g |
| Àwọ̀ | Idẹ |
| Ohun elo | Irin |
| Titiipa Iru | Bọtini foonu |
| Pataki Awọn ẹya ara ẹrọ | Keyless Entry, Auto Lock, 20 User Codes, 1-Touch Motorized Locking |
| Awọn batiri ti a beere | Bẹẹni (Awọn batiri AA meji) |
| Awọn irinše to wa | Backup Key*1, Deadbolt/Latch*1, Exterior Assembly*1, Mounting Plate*1, Strike Screws*2, Strike*1 |
7. Laasigbotitusita
- Titii Ko Dahun: Check battery levels. Replace batteries if the low battery indicator is active.
- Incorrect Code Entry: Ensure you are pressing the correct sequence and the '#' key after each code entry.
- Setting Failure: If the indicator light flashes red after attempting a setting change, the operation was unsuccessful. Re-attempt the steps carefully.
- Physical Key Not Working: Ensure the key is fully inserted and turned correctly. Check for any obstructions in the keyway.
- Àìṣiṣẹ́ Títìpa Àìfọwọ́sowọ́pọ̀: Verify that the Auto-Lock function is enabled (refer to section 4.4).
8. Atilẹyin ọja ati Support
LaView offers lifetime technical support from the date of purchase. For any concerns or assistance, please contact their customer service team:
- Online Phone Calls: Monday to Friday, 9 am to 5 pm PDT.
- 24/7 Online After-Sales Email Service.
Refer to your product packaging or the official LaView webojula fun pato olubasọrọ awọn alaye.
