1. Ifihan
Thank you for choosing the HB-704 Submersible Pump. This pump is designed for efficient water circulation in various applications, including cold air mechanisms and ice machines. Its compact design and robust performance make it an ideal choice for continuous operation. Please read this manual thoroughly before installation and operation to ensure safe and effective use.
Nọmba 1: Akọkọ view of the HB-704 Submersible Pump. This image shows the overall compact design of the pump, including its outlet nozzle and power cord connection.
2. Awọn ilana aabo
To prevent injury or damage to the pump, always observe the following safety precautions:
- Aabo Itanna: Rii daju pe ipese agbara voltage matches the pump's requirements (220-240V/50Hz). Do not operate the pump with a damaged power cord or plug. Always disconnect power before handling or performing maintenance on the pump.
- Ifibọlẹ ni kikun: The pump must be completely immersed in water during operation. Never run the pump dry (idling without water), as this will cause overheating and permanent damage.
- Iwọn otutu omi: The working water temperature must not exceed 35 °C (95 °F). Operating the pump in water hotter than this limit can lead to malfunction or damage.
- Ibi ti o yẹ: Place the pump on a stable, flat surface within the water. Ensure it is not obstructed by debris.
- Mimu: Do not lift or carry the pump by its power cord. Use the pump body for handling.
- Awọn ọmọde ati awọn ohun ọsin: Keep the pump and its power cord out of reach of children and pets.
3. Eto
Follow these steps for proper installation of your HB-704 Submersible Pump:
- Yọ fifa soke: Carefully remove the pump from its packaging and inspect it for any signs of damage.
- So okun: Connect a hose with an inner diameter of 12mm to the pump's outlet nozzle (approximately 13mm in diameter). Ensure a secure fit to prevent leaks.
- Gbe fifa soke: Place the pump in the desired location within the water reservoir or container. Ensure the pump is fully submerged and resting on a stable surface. The integrated suction cups on the bottom of the pump can help secure it in place.
- Route Power Cord: Route the 130cm long power cord safely, ensuring it does not create a tripping hazard and is not pinched or kinked.
- Ṣe idaniloju Ifisilẹ: Double-check that the entire pump body is completely underwater before connecting to power.
olusin 2: Apa view showing the power cord connection and bottom view illustrating the suction cups for stable placement.
4. Awọn ilana Iṣiṣẹ
Once the pump is properly set up and fully submerged:
- Sopọ si Agbara: Plug the power cord into a suitable electrical outlet (220-240V/50Hz). The pump will begin operating immediately.
- Bojuto Ipele Omi: Continuously monitor the water level to ensure the pump remains fully submerged during operation. Running the pump without water will cause damage.
- Observe Flow: Check the water flow from the outlet to ensure it is consistent and unobstructed.
- To Stop Operation: Ge asopọ agbara plug lati itanna iṣan.
olusin 3: Iwaju view of the pump, highlighting the water intake area. Ensure this area remains clear of debris for optimal performance.
5. Itọju
Regular maintenance will prolong the life and efficiency of your pump:
- Ge Agbara: Always unplug the pump from the power source before performing any maintenance.
- Iboju gbigbemi mimọ: Periodically check and clean the intake screen to remove any accumulated debris, such as dirt, algae, or sediment, which can reduce flow.
- Impeller Mimọ: If flow is significantly reduced, the impeller may be clogged. Carefully disassemble the pump (refer to diagrams if available, or gently pry open the intake cover) and clean the impeller and its housing. Rinse with clean water.
- Ṣayẹwo okun agbara: Regularly inspect the power cord for any cuts, fraying, or damage. Do not use the pump if the cord is damaged.
- Ibi ipamọ: If storing the pump for an extended period, clean it thoroughly, dry it completely, and store it in a dry, frost-free location.
olusin 4: Apa view of the pump, showing the vented casing. Regular cleaning helps maintain optimal heat dissipation.
6. Laasigbotitusita
If you encounter issues with your HB-704 pump, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Pump ko bẹrẹ | Ko si ipese agbara Okun agbara ti bajẹ Impeller jammed by debris |
Ṣayẹwo ibudo agbara ati asopọ Inspect and replace if damaged (do not use) Disconnect power, clean impeller and intake |
| Dinku sisan omi | Iboju gbigba ti o ti di Kinked or obstructed hose Impeller partially blocked |
Clean intake screen Straighten hose, remove obstructions Disconnect power, clean impeller |
| Pump jẹ alariwo | Idoti ni impeller Fifa ko ni kikun sinu omi Pump not stable |
Disconnect power, clean impeller Ensure pump is completely underwater Secure pump with suction cups on a flat surface |
| Pump duro lairotẹlẹ | Overheating due to dry running Idilọwọ agbara |
Ensure continuous full submersion Ṣayẹwo ipese agbara |
7. Awọn pato
Detailed technical specifications for the HB-704 Submersible Pump:
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | HB-704 |
| Ipese Agbara Voltage | 220-240V / 50Hz |
| Agbara agbara | 14W |
| Oṣuwọn Sisan ti o pọju | 800 L/h (Liters per hour) |
| Max Ori | 1.75 m (Meters) |
| Awọn iwọn (Itosi.) | Length: 75mm, Width: 81mm (including ears), Height: 71mm |
| Outlet Nozzle Diameter | Approx. 13mm (suitable for 12mm inner diameter hose) |
| Agbara Okun Ipari | Isunmọ. 130cm |
| Max Working Water Temperature | 35°C (95°F) |
| Ohun elo | Omiiran |
| Ara | Submersible |
| Orisun agbara | Okun Itanna |
olusin 5: Top view of the pump, showing the product label with key specifications.
8. Atilẹyin ọja ati Support
As the brand is listed as 'Unknown', specific warranty and support information is not provided in this manual. For any warranty claims, technical support, or service inquiries, please contact the retailer or seller from whom you purchased this product. Retain your proof of purchase for any potential claims.
