Ọrọ Iṣaaju
This manual provides essential information for the safe and efficient operation and maintenance of your Pedrollo PKm60 Peripheral Booster Water Pump. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent injury or damage.
The Pedrollo PKm60 pump is designed for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the pump's materials. It is ideal for domestic use, including water distribution in combination with small pressure sets and for garden and allotment irrigation. For optimal performance and longevity, the pump should be installed in an enclosed environment or at least sheltered from inclement weather.
Alaye Aabo
IKILO: Ikuna lati tẹle awọn ilana aabo wọnyi le ja si mọnamọna, ina, ipalara nla, tabi iku.
- Always disconnect the pump from the power supply before performing any installation, maintenance, or repair work.
- Ensure the electrical installation complies with all local and national electrical codes. The pump requires a 220V 60Hz power supply.
- A gbọ́dọ̀ fìdí pọ́ọ̀ǹpù náà múlẹ̀ dáadáa kí ó má baà jẹ́ kí iná mànàmáná tàn kálẹ̀.
- Ma ṣe ṣiṣẹ fifa soke ti okun tabi plug ba bajẹ.
- Do not pump flammable, explosive, or corrosive liquids. This pump is designed for clean water only.
- Protect the pump from freezing temperatures. Freezing water inside the pump can cause severe damage.
- Rí i dájú pé afẹ́fẹ́ tó péye wà ní àyíká pọ́ọ̀ǹpù náà kí ó má baà gbóná jù.
- Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni fifa soke lakoko iṣẹ.
- For complex installations or if you are unsure, consult a qualified electrician or plumber.
Ọja Pariview
The Pedrollo PKm60 is a reliable peripheral booster pump designed for efficient water handling in domestic applications. Its compact design and robust construction ensure long-term performance.
olusin 1: Iwaju-ẹgbẹ view of the Pedrollo PKm60 Peripheral Booster Water Pump. The pump is blue with a black motor housing and a red pressure relief valve. It features a 1-inch NPT inlet and outlet.
Awọn ẹya pataki:
- Omi Iru: Omi mimọ
- Awọn ohun elo: Water supply systems, pressure systems, irrigation pumps
- Iwe afọwọkọ: Surface pump
- Idile: Agbeegbe
- Iwọn Iṣe: Flow rate up to 11 GPM, Head up to 130 ft.
- Temperature of Liquid: -10 °C si +60 °C
- Iwọn otutu ibaramu: Up to +40 °C (+50 °C for PK 60)
- Manometric Suction Lift: Ti o de 8 m
- Ipa Ṣiṣẹ: 6 bar for PK 60
- Agbara: 0.5 HP
- Awọn isopọ: 1 inch x 1 inch NPT
Eto ati fifi sori
Proper installation is crucial for the pump's performance and longevity. It is recommended that installation be performed by a qualified professional.
- Ibi: Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. An enclosed environment is ideal.
- Iṣagbesori: Securely mount the pump on a stable, level surface using appropriate fasteners. Ensure there is sufficient space around the pump for ventilation and maintenance access.
- Awọn isopọ Pipin:
- Connect the suction pipe to the pump's inlet (typically marked "IN" or with an arrow pointing towards the pump). Ensure the suction pipe is airtight to prevent air leaks, which can cause the pump to lose prime.
- Connect the discharge pipe to the pump's outlet (typically marked "OUT" or with an arrow pointing away from the pump).
- Use appropriate fittings (1 inch NPT) and sealants to ensure leak-free connections. Avoid putting strain on the pump's connections from the piping.
- Fi àtọwọdá ẹsẹ kan sori ẹrọ kan pẹlu strainer ni opin paipu mimu ni orisun omi lati ṣe idiwọ idoti lati wọ inu fifa soke ati lati ṣetọju nomba.
- Asopọmọra itanna:
- Ensure the power supply matches the pump's requirements (220V 60Hz).
- Connect the pump to a dedicated circuit protected by a circuit breaker or fuse of appropriate rating.
- Verify proper grounding to prevent electrical hazards.
- Fifi soke fifa soke: Before initial operation, the pump must be primed.
- Remove the priming plug (usually located on the top of the pump casing).
- Kun fifa casing patapata pẹlu omi mimọ titi yoo fi ṣàn.
- Rọpo plug alakoko ni aabo.
- Open any valves on the suction and discharge lines.
Awọn ilana Iṣiṣẹ
Nígbà tí a bá ti fi sori ẹrọ tí a sì ti ṣe àtúnṣe rẹ̀, fifa omi náà ti ṣetán fún iṣẹ́.
- Ibẹrẹ Ibẹrẹ: After priming, connect the pump to the power supply. The pump should start immediately and begin pumping water.
- Abojuto:
- Observe the pump during the first few minutes of operation for any unusual noises, vibrations, or leaks.
- Check the pressure gauge (if installed) to ensure the pump is operating within its specified working pressure range (6 bar for PK 60).
- Ensure a steady flow of water. If the pump runs without delivering water, shut it off immediately to prevent damage from dry running. Re-prime the pump.
- Ise Tesiwaju: The pump is designed for continuous duty within its specified performance limits. Avoid operating the pump outside these limits.
- Paade: To turn off the pump, disconnect it from the power supply. If the pump will be out of use for an extended period, especially in cold weather, follow the winterization procedures in the Maintenance section.
Itoju
Regular maintenance ensures the longevity and efficient operation of your Pedrollo pump.
- Ayẹwo igbagbogbo: Periodically check the pump for any signs of leaks, corrosion, or damage to the casing or electrical components.
- Mimọ: Keep the pump and its surroundings clean and free from debris. Ensure ventilation openings are not obstructed.
- Foot Valve/Strainer: Inspect and clean the foot valve and strainer regularly to prevent blockages and ensure unrestricted water flow into the pump.
- Ṣíṣe ìgbà òtútù (fún àwọn ojú ọjọ́ òtútù): Ti o ba ti fi sori ẹrọ fifa soke ni agbegbe ti o wa labẹ awọn iwọn otutu didi ati pe kii yoo lo, o gbọdọ wa ni ṣiṣan lati yago fun ibajẹ.
- Ge asopọ agbara si fifa soke.
- Open the drain plug (if present) or disconnect the suction and discharge pipes to allow all water to drain from the pump casing and pipes.
- Store the pump in a warm, dry place if possible, or ensure it is completely dry before reassembly.
- Iṣẹ Ọjọgbọn: For any internal repairs or complex issues, contact a qualified service technician. Do not attempt to disassemble the motor or pump head beyond basic maintenance.
Laasigbotitusita
This section outlines common issues and their potential solutions. Always disconnect power before troubleshooting.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Pump ko bẹrẹ. | No power, tripped circuit breaker, faulty wiring, seized impeller. | Check power supply, reset breaker, inspect wiring (by qualified person), check for obstructions in impeller. |
| Fifa gbalaye sugbon ko si omi tabi kekere sisan. | Pump not primed, air leak in suction line, clogged foot valve/strainer, low water level in source, discharge valve closed. | Re-prime pump, check suction line for leaks, clean foot valve/strainer, ensure adequate water in source, open discharge valve. |
| Fifa jẹ alariwo tabi gbigbọn pupọ. | Air in pump/suction line, cavitation, loose mounting, worn bearings. | Re-prime pump, check for air leaks, ensure adequate water supply, tighten mounting bolts, contact service for bearing issues. |
| Yiyi fifa soke tan ati pa nigbagbogbo. | Pressure switch malfunction, small leak in system, waterlogged pressure tank (if applicable). | Inspect pressure switch, check for leaks in plumbing, inspect pressure tank. |
Awọn pato
Detailed technical specifications for the Pedrollo PKm60 Peripheral Booster Water Pump.
| Paramita | Iye |
|---|---|
| Nọmba awoṣe | PKm60220 |
| Olupese | PEDROLLO |
| Olomi Iru | Omi mimọ |
| Orisun agbara | AC/DC (220V 60Hz) |
| Agbara ẹṣin | 0.5 HP |
| Oṣuwọn Sisan (O pọju) | 11 GPM (Gọọnu Fun Iṣẹju kan) |
| Head (Max) | 130 ft. |
| Liquid otutu Range | -10 °C si +60 °C |
| Ambient Temperature (Max) | +40 °C (+50 °C for PK 60) |
| Manometric Suction Lift (Max) | 8 m |
| Working Pressure (PK 60) | 6 igi |
| Awọn isopọ Inlet/Ijade | 1 inch x 1 inch NPT |
| Iwọn Nkan | 13 iwon |
| Ọja Mefa | 12 x 8 x 8 inches |
Figure 2: Performance curves illustrating the relationship between Head (ft.) and Flow rate (GPM) for Pedrollo PKm60 and PKm65 pumps. The PKm60 curve shows a maximum flow rate of approximately 11 GPM at 20 ft. head and a maximum head of 130 ft. at 0 GPM.
Atilẹyin ọja ati Support
Warranty information for your Pedrollo PKm60 pump is typically provided at the time of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Pedrollo customer service or an authorized Pedrollo dealer. Ensure you have your pump's model number (PKm60220) and serial number (if applicable) ready when contacting support.
