INKBIRDPLUS Temperature Gun Infrared Thermometer User Manual

Ọrọ Iṣaaju

The INKBIRDPLUS INK-IFT03 is a non-contact infrared thermometer designed for accurate surface temperature measurement across a wide range of applications. This digital laser thermometer gun is suitable for use in cooking, pizza ovens, reptile enclosures, and various industrial or household tasks. It features a backlight LCD, adjustable emissivity, and a wide temperature range for versatile and precise readings.

Figure 1: INKBIRDPLUS INK-IFT03 Infrared Thermometer Gun

Alaye Aabo

Please read and understand all safety warnings before operating the device to prevent injury or damage.

• This infrared thermometer is designed for measuring surface temperatures only. It is NOT intended for measuring human body temperature.
• The device cannot measure the internal temperature of an object.
• Do not irradiate human eyes directly or indirectly with the infrared laser at any time. The laser is used for targeting purposes only.
• Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.

Figure 2: Important Safety Warning - Not for Human Use

Ọja Pariview

Familiarize yourself with the main components of your INKBIRDPLUS infrared thermometer.

Figure 3: Key Components and Controls

• Ohun tó ń fa ìwọ́n: Ó ń mú ìwọ̀n àti lésà ṣiṣẹ́.
• Ifihan LCD: Shows temperature readings, unit, emissivity, and battery status.
• Backlight/Laser Button: Toggles backlight and laser.
• Bọtini Yipada Ipo: Cycles through different modes.
• Awọn bọtini oke/isalẹ: Adjust settings like emissivity.
• Abala Batiri: Batiri 9V ni o wa ninu ile naa.
• IR Sensor & Infrared Lens: Ó ń ṣe àwárí ìtànṣán infrared fún ìwọ̀n otutu.

Bibẹrẹ

Fifi sori batiri

Iwọn otutu naa nilo batiri 9V kan (pẹlu rẹ). Lati fi batiri sii tabi rọpo rẹ:

1. Locate the battery compartment on the handle of the device.
2. Ṣii ideri iyẹwu batiri naa.
3. So batiri 9V pọ mọ agekuru batiri naa, ki o rii daju pe o peye polarity.
4. Fi batiri sinu yara naa ki o si ti ideri naa mọ daradara.

Isẹ Guide

Gbigba Iwọn

To measure the surface temperature of an object:

1. Point the infrared lens towards the target object.
2. Pull and hold the measurement trigger. The laser pointer will activate to help you aim.
3. For more accurate readings, hold the trigger for 2-3 seconds.
4. Kika iwọn otutu yoo han loju iboju LCD.
5. Release the trigger to hold the reading on the display. The device will automatically shut down after 30 seconds of inactivity to conserve battery.

Unit Switching (°C / °F)

You can switch between Celsius (°C) and Fahrenheit (°F) temperature units:

• With the device powered on, press and hold the Backlight/Laser button for at least 3 seconds to toggle between °C and °F.

Figure 4: Selectable Display of °C/°F

Adijositabulu Emissivity

Emissivity (ε) is a measure of an object's ability to emit infrared energy. Different materials have different emissivity values. Adjusting the emissivity setting on your thermometer ensures the most accurate temperature measurement for various surfaces. The emissivity range is 0.1 to 1.0.

Láti ṣàtúnṣe ìtújáde:

1. Press the "MODE" button until "EMS" (Emissivity) appears on the display.
2. Use the Up/Down keys to adjust the emissivity value according to the material being measured.
3. Refer to the emissivity table below for common materials.

Figure 5: Emissivity Adjustment for Accurate Readings

Figure 6: Emissivity Table for Common Materials

Ijinna si Ipin Aami (D:S)

The INK-IFT03 has a Distance to Spot (D:S) ratio of 16:1. This means that at a distance of 16 units, the measurement spot diameter will be 1 unit. For example, if you are 16 inches away from the target, the measurement area will be a 1-inch circle. A higher D:S ratio allows for accurate measurement of smaller areas from a greater distance.

Figure 7: Understanding the 16:1 Distance to Spot Ratio

Afikun Awọn ẹya ara ẹrọ

• Backlight LCD: The LCD screen features a backlight for easy reading in low-light conditions.
• Iṣẹ idaduro data: Automatically holds the last measured reading on the display after releasing okunfa.
• Atọka Batiri Kekere: An icon on the display will indicate when the battery level is low, signaling it's time for replacement.
• Itaniji giga/Kekere: The device can be set to alert you if the measured temperature exceeds or falls below a specified range.

Itoju ati Itọju

Proper care will ensure the longevity and accuracy of your thermometer.

• Lati nu ẹrọ naa, nu rẹ pẹlu asọ, damp asọ. Ma ṣe lo awọn olutọpa abrasive tabi fi ẹrọ bọ inu omi.
• Keep the infrared lens clean and free from dust or debris, as this can affect measurement accuracy.
• Store the thermometer in a dry place, away from extreme temperatures and direct sunlight.
• Yọ batiri naa kuro ti ẹrọ naa ko ba lo fun igba pipẹ lati dena jijo batiri.

Laasigbotitusita

If you encounter issues with your INKBIRDPLUS thermometer, consider the following common solutions:

• Ko si Ifihan/Ẹrọ ti ko tan: Ṣàyẹ̀wò bóyá bátìrì 9V náà wà ní ọ̀nà tó tọ́ àti pé ó ní agbára tó láti fi ṣiṣẹ́. Rọpò bátìrì náà tí ó bá pọndandan.
• Awọn kika ti ko pe:
  • Ensure the emissivity setting is appropriate for the material being measured.
  • Verify that the distance to spot ratio is being observed correctly. Move closer or further away from the target as needed.
  • Clean the infrared lens if it appears dirty or obstructed.
  • Ensure there are no obstructions between the thermometer and the target object.
• Lésà Kò Ṣiṣẹ́: Check if the laser function is enabled. If the battery is low, the laser might not function optimally.

If problems persist, contact INKBIRDPLUS customer support for further assistance.

Imọ ni pato

Atilẹyin ọja ati Onibara Support

For warranty information or technical assistance, please refer to the contact details provided with your product packaging or visit the official INKBIRDPLUS webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

You can visit the official INKBIRDPLUS store on Amazon for more information: INKBIRDPLUS Amazon Store