Evolur Loft Antilia 4-in-1 Convertible Full-Size Baby Crib Instruction Manual

1. Alaye Aabo

Please read all instructions carefully before assembly and use of the Evolur Loft Antilia 4-in-1 Convertible Full-Size Baby Crib. Keep this manual for future reference.

Awọn ikilọ Abo pataki:

• Always ensure all bolts and fasteners are securely tightened. Periodically check for loose hardware.
• Do not use this crib if any parts are missing, damaged, or broken. Contact Evolur customer service for replacement parts.
• The mattress support must be adjusted to the lowest position once your child can pull themselves to a standing position.
• Má ṣe gbé ibùsùn sí ẹ̀gbẹ́ fèrèsé níbi tí okùn láti inú àwọn aṣọ ìbojú tàbí àwọn aṣọ ìbòrí lè fún ọmọdé ní ọmú.
• Do not use a mattress thicker than 6 inches (15 cm) with this crib.
• This product is GreenGuard Gold certified, meaning it has been rigorously tested for thousands of chemicals and VOCs to ensure a healthier sleep environment.
• This product is JPMA (Juvenile Products Manufacturers Association) certified and built to meet or exceed safety standards set by the CPSC (Consumer Product Safety Commission) and ASTM (American Society for Testing and Materials).
• Ilana 65 Ikilọ: This product can expose you to chemicals including formaldehyde, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

2. Ọja Ipariview

The Evolur Loft Antilia 4-in-1 Convertible Full-Size Baby Crib is designed to adapt to your child's growth, transitioning from a crib to a daybed, toddler bed, and full-size bed. Crafted from solid poplar wood and fine veneers, it features a modern Scandinavian design with a Vanilla Bean finish.

Awọn ẹya pataki:

• Ìyípadà 4-nínú-1: Easily converts from a crib to a daybed, toddler bed, and full-size bed (conversion kits sold separately).
• Gíga Matiresi Tí A Lè Ṣàtúnṣe: Features 3 adjustable mattress height positions to accommodate your child's developmental stages.
• Ikole ti o tọ: Made from solid poplar wood and fine veneers for lasting stability.
• Ifọwọsi aabo: GreenGuard Gold and JPMA certified, meeting high safety standards.

Awọn iwọn ọja ati iwuwo:

• Awọn iwọn: 55.5" L x 30.75" W x 46" H
• Ìwọ̀n Nkan: Ni isunmọ 101.8 lbs
• Iṣeduro iwuwo ti o pọju: 85 lbs
• Iṣeduro Giga ti o pọju: 46 inches

Iwaju view of the Evolur Loft Antilia crib in Vanilla Bean finish, showcasing its modern design and slatted sides.

Diagram illustrating the length (58.75 inches), width (31.25 inches), and height (46.5 inches) of the Evolur Loft Antilia crib, along with its product weight of 74.8 lbs.

3. Eto ati Apejọ

Assembly of the Evolur Loft Antilia crib is required. Please follow the detailed instructions provided in the separate assembly guide included with your product. Ensure all components are present before beginning assembly.

Awọn imọran Apejọ Gbogbogbo:

• Unpack all parts and hardware. Verify against the parts list in your assembly guide.
• Assemble the crib on a soft, clean surface to prevent scratching.
• Use appropriate tools as specified in the assembly guide. A power drill with appropriate bits can expedite assembly, but exercise caution to avoid overtightening.
• When tightening fasteners, ensure they are snug but do not overtighten, which can damage the wood.
• Fiyèsí sí ìtọ́sọ́nà àwọn ẹ̀yà ara gẹ́gẹ́ bí a ṣe fihàn nínú àwọn àwòrán náà.
• After assembly, ensure the mattress support is level and all connections are secure.

4. Awọn ilana Iṣiṣẹ

Adjusting Mattress Height:

The Evolur Loft Antilia crib offers three adjustable mattress height positions to ensure safety and convenience as your child grows.

1. Ipo ti o ga julọ: Fun awọn ọmọ tuntun ati awọn ọmọde ti ko le gbe soke lori ọwọ ati awọn ẽkun wọn. Ipo yii ngbanilaaye irọrun wiwọle si ọmọ rẹ.
2. Ipo Aarin: For infants who can push up on their hands and knees, but cannot yet pull themselves to a standing position.
3. Ipo ti o kere julọ: For toddlers who can pull themselves to a standing position. This is the safest position to prevent your child from climbing out of the crib.

To adjust the mattress height, carefully remove the mattress and mattress support. Realign the mattress support to the desired height setting and secure it with the provided hardware, ensuring all fasteners are tight.

Visual guide showing three adjustable mattress height positions: Newborn, Rolling over, and Standing, to accommodate a child's growth.

Converting the Crib:

The Antilia crib can be converted into a daybed, toddler bed, and full-size bed. Conversion kits for the toddler bed (universal toddler guardrail) and full-size bed (universal full-size bed rails) are sold separately. Refer to the specific conversion kit instructions for detailed steps.

Illustrations of the crib's four conversion stages: Crib, Toddler bed (with universal toddler guardrail, sold separately), Daybed/kids sofa, and Full-size bed (with universal full-size bed rails, sold separately).

5. Itọju

Proper care and maintenance will extend the life and appearance of your Evolur Loft Antilia crib.

Awọn ilana mimọ:

• Wipe surfaces with a dry cloth to remove dust and light dirt.
• For more thorough cleaning, use a soft, damp cloth with mild soap and water. Immediately wipe dry with a clean, soft cloth.
• Avoid using abrasive cleaners, harsh chemicals, or furniture polish that may damage the finish.

Gbogbogbo Itọju:

• Periodically check all screws, bolts, and fasteners to ensure they are tight. Do not overtighten.
• Avoid exposing the crib to extreme temperature changes or direct sunlight, which can cause wood to warp or fade.
• Keep the crib away from heat sources and air conditioning vents.

6. Laasigbotitusita

If you encounter any issues with your Evolur Loft Antilia crib, please refer to the following common solutions:

Awọn oran ti o wọpọ ati Awọn ojutu:

• Damaged or Chipped Parts Upon Arrival: If any parts are damaged or have paint imperfections upon unboxing, do not proceed with assembly. Contact Evolur customer support immediately for assistance and replacement parts.
• Iṣoro Nigba Apejọ: Ensure you are following the assembly guide step-by-step. Verify that all parts are correctly oriented. If a specific fastener or part is difficult to install, re-check the alignment of the components. Do not force parts together.
• Crib Appears Uneven or Wobbly: Check that all bolts and screws are securely tightened. Ensure the mattress support is correctly seated and level on all four corners. Disassemble and reassemble if necessary, paying close attention to alignment.
• Hardware ti o padanu: If any hardware is missing, do not substitute with other parts. Contact Evolur customer support for replacement hardware.

7. Awọn pato

8. Atilẹyin ọja ati Support

For specific warranty information, please refer to the documentation included with your purchase or contact Evolur customer support directly. Evolur products are typically backed by a manufacturer's warranty covering defects in materials and workmanship.

Atilẹyin Onibara:

If you have any questions, require replacement parts, or need assistance with assembly or troubleshooting, please contact Evolur customer support. Contact information can usually be found on the manufacturer's webojula tabi lori apoti.

For general inquiries or to explore other products, visit the official Evolur store: Evolur Store on Amazon.

This product is eligible for 90-day free returns, refund, or replacement through Amazon.

9. Afikun Resources

No official product videos were found in the provided data. For visual guides or further information, please check the Evolur official website or their social media channels.

The Evolur Loft Antilia crib paired with a matching double dresser and changing tray topper in a nursery setting, demonstrating how to complete the collection (coordinating pieces sold separately).