Ọrọ Iṣaaju
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Okin Refined-R Power Recliner Motor Actuator. This motor is designed as a direct replacement for Okin JLDQ.14.270.114A and can also replace JLDQ.14.270.114F series motors, with minor differences that do not affect functionality.
The actuator motor set includes one motor and one connector. The connector features a 2-pin plug with a clip, specifically designed for connection to the master motor or power supply.
Olusin 1: Pariview of the Okin Refined-R JLDQ-14 Power Recliner Motor Actuator.
Eto ati fifi sori
Before beginning installation, ensure your recliner's power is disconnected. It is crucial to verify that the replacement motor's brand and model match your existing unit to ensure compatibility with your recliner's frame, which has specific requirements for actuator dimensions, stroke, and plugs.
Ṣayẹwo ibamu:
- Confirm your existing motor is an Okin JLDQ.14.270.114A or JLDQ.14.270.114F series.
- Ensure the physical dimensions and plug type (2-pin with clip) are consistent with your recliner's requirements.
olusin 2: Isunmọ view of the motor's identification label, showing model and specifications.
Awọn igbesẹ fifi sori ẹrọ:
- Ge Agbara: Unplug the recliner from the wall outlet to prevent accidental operation during installation.
- Yọ Moto atijọ kuro: Carefully detach the old motor from the recliner frame. Note how it is mounted and connected.
- So mọto tuntun pọ: Attach the new Okin motor to the recliner frame using the existing mounting points. Ensure it is securely fastened.
- Pulọọgi Asopọ: Connect the 2-pin plug from the new motor to the corresponding receptacle on your recliner's power supply or control box. Ensure the clip engages properly for a secure connection.
Figure 3: Detail of the 2-pin plug for connecting to the power supply.
The installation process is designed to be straightforward. Once installed, the motor operates quietly.
Awọn ilana Iṣiṣẹ
The Okin Refined-R motor actuator is an integral component of your power recliner, enabling smooth and controlled movement. Operation is typically controlled via the recliner's hand control or integrated buttons.
Iṣe Didara:
- Once installed and connected to power, use your recliner's standard controls (buttons or remote) to extend or retract the footrest and recline the backrest.
- The motor is designed for intermittent use. Its operational frequency is specified as On 1 minute / Off 8 minutes. This duty cycle ensures the longevity and proper functioning of the motor by allowing it to cool down between operations. Avoid continuous operation beyond the recommended duty cycle.
Itoju
To ensure the long-term performance and reliability of your Okin Refined-R motor actuator, periodic maintenance is recommended.
Awọn imọran Itọju Gbogbogbo:
- Jeki mimọ: Regularly inspect the motor and surrounding areas for dust, debris, or obstructions. Gently wipe clean with a dry cloth.
- Ṣayẹwo Awọn isopọ: Periodically inspect all electrical connections, especially the 2-pin plug, to ensure they are secure and free from damage.
- Lubrication: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by Okin support.
- Yago fun apọju: Do not exceed the recliner's weight capacity, as this can strain the motor and reduce its lifespan.
Laasigbotitusita
If your recliner is not functioning correctly after motor replacement, follow these troubleshooting steps:
Awọn oran ti o wọpọ ati Awọn ojutu:
- No Movement/Power:
- First, troubleshoot the recliner's switch and power supply. Ensure the recliner is properly plugged into a working electrical outlet.
- Ṣayẹwo okun agbara fun eyikeyi ibajẹ ti o han.
- Verify that the 2-pin plug from the motor is securely connected to the power supply.
- Mọto Ko Dahun:
- Ensure the motor model matches your recliner's requirements. While this motor can replace JLDQ.14.270.114F, slight differences might exist.
- Inspect the motor's wiring for any pinches, cuts, or loose connections.
- Awọn Ariwo Alailẹgbẹ:
- Check for any obstructions around the motor or linkage mechanisms that might be causing friction or binding.
- Ensure the motor is securely mounted and not vibrating against the frame.
If these steps do not resolve the issue, it is recommended to contact Okin customer support for further assistance.
Awọn pato
Detailed technical specifications for the Okin Refined-R JLDQ.14.270.114A motor actuator:
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | JLDQ.14.270.114A (also replaces JLDQ.14.270.114F series) |
| Ifarahan | Black (PA), Silver White (Aluminum) |
| Ọpọlọ | 114 mm |
| Minimum Dimensions (Shrink) | 270 mm |
| Maximum Dimension (Extend) | 384 mm |
| Load (Push Force) | 1000 N |
| Igbohunsafẹfẹ isẹ | On 1 min / Off 8 min |
| Asopọmọra | 2-pin plug with clip for master motor/power supply |
| Iwọn Nkan | 2.77 iwon |
| Package Mefa | 14.37 x 6.3 x 4.65 inches |
Àwòrán 4: Àkótán àwòrán àwọn ìlànà pàtàkì nípa ọjà náà.
Atilẹyin ọja ati Support
For information regarding warranty coverage or technical support, please refer to the official Okin website or contact their customer service directly. It is recommended to have your product model number (JLDQ.14.270.114A or JLDQ.14.270.114F) and purchase details available when contacting support.
O le wa alaye siwaju sii ati awọn alaye olubasọrọ nipa lilo si awọn Ile itaja Okin lori Amazon.
