1. Ifihan
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Ọja Ipariview ati irinše
The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.
2.1 Awọn paati bọtini
- Actuator Motor: The main unit responsible for linear movement.
- Awọn asopọ:
- 5-pin round plug: For connecting to the switch hand control.
- 2-pin square plug: Fun asopọ si ipese agbara.

Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.

Nọmba 2: Alaye view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.
3. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | JLDQ.12.133.226M |
| Agbara fifuye | Push force: 750N, Pull force: 750N |
| Ọpọlọ | 226 mm |
| Minimum Installation Size (Shrink) | 133 mm |
| Maximum Installation Size | 359 mm |
| Igbohunsafẹfẹ isẹ | On 1 min / Off 8 min |
| Iyara | 29VDC SMPS, 10 sec without load |
| Ifarahan | Black (PA), Silver White (Aluminum) |
| Ọja Mefa | 8.9 x 8.9 x 14.13 inches |
| Iwọn Nkan | 4.59 iwon (2.09 kilo) |

Figure 3: Product label displaying technical data and model information, including serial number Q21061699 00271 ati awoṣe JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/patents.
4. Eto ati fifi sori
Akiyesi Ibamu Pataki: This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.
4.1 Pre-Fifi sọwedowo
- Ṣe àyẹ̀wò Àwòṣe: Confirm that your existing motor is an Okin JLDQ.12.133.226M.
- Ge asopọ agbara: Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
- Ṣayẹwo Awọn ohun elo: Check the new motor and cables for any visible damage.
4.2 fifi sori Igbesẹ
- Yọ Moto atijọ kuro: Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
- Ipo Moto Tuntun: Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
- Moto Abo: Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
- Awọn okun Sopọ:
- Sopọ awọn 5-pin plug yika to the hand control switch.
- Sopọ awọn 2-pin square plug to the power supply unit.
- Iṣakoso USB: Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.

Olusin 4: Example of the motor actuator mounted, showing its extended position.
5. Awọn ilana Iṣiṣẹ
Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.
- Agbara Tan: Plug the recliner/bed into a suitable power outlet.
- Iṣakoso ọwọ: Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
- Àyíká Iṣẹ́: Adhere to the specified operation frequency: On 1 minute / Off 8 minutes. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.
6. Itọju
Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.
- Ninu: Wipe clean the exterior of the motor and cables with a dry or slightly damp asọ. Ma ṣe lo awọn olutọpa abrasive tabi fi omi mọlẹ kuro ninu omi.
- Ayẹwo USB: Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
- Awọn ẹya gbigbe: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
- Lubrication: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by Okin support.
7. Laasigbotitusita
If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:
- Ko si gbigbe:
- Check if the power cord is securely plugged into the wall outlet and the power supply unit.
- Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
- Ensure the 5-pin round plug from the motor is properly connected to the hand control.
- Test the wall outlet with another appliance to confirm it has power.
- Intermittent Movement:
- Ṣe àyẹ̀wò gbogbo àwọn ìsopọ̀ okùn fún ìfọ́ tàbí ìbàjẹ́.
- Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
- Awọn Ariwo Alailẹgbẹ:
- Check for any obstructions around the motor or the linear shaft.
- Ensure the motor is securely mounted and not vibrating against the frame.
- Motor Does Not Extend/Retract Fully:
- Verify that there are no physical obstructions preventing full movement.
- Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.
If issues persist after following these steps, contact Okin customer support or a qualified technician.
8. Alaye Aabo pataki
- Always disconnect power before performing any installation, maintenance, or cleaning.
- Ọja yii jẹ apẹrẹ fun lilo inu ile nikan.
- Do not allow children or pets to play near the moving parts of the recliner or bed.
- Ensure proper cable routing to prevent tripping hazards or damage to the cables.
- Do not attempt to modify the motor or its components. Unauthorized modifications can lead to malfunction and void the warranty.
- Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.
9. Atilẹyin ọja ati Support
For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the Okin store for more products and information: Ile itaja Okin lori Amazon.





