VJOYCAR 2-Way LCD Pager Remote Control DIY Install System

Wireless Car Alarm System User Manual

Brand: VJOYCAR

Awoṣe: 2-Way LCD Pager Remote Control DIY Install System

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VJOYCAR Wireless Car Alarm System. This universal vehicle anti-theft security system features a 2-way LCD pager remote control, a siren horn, and integrated shock, vibration, window, door, and trunk open alarm capabilities. Designed for DIY installation, it offers advanced security without complex wiring.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn paati wa ninu package rẹ:

Components of the VJOYCAR Wireless Car Alarm System, including the siren, two remote keys, air sensor, and antenna.

Figure 1: Included components of the VJOYCAR Wireless Car Alarm System.

Eto ati fifi sori

The VJOYCAR Wireless Car Alarm System is designed for quick and easy DIY installation, typically taking about 5 minutes. No cutting of original car cables is required, preserving your vehicle's circuit integrity.

Siren Installation

  1. Connect the red cable of the siren to the car battery's positive (+) terminal.
  2. Connect the black cable of the siren to the car battery's negative (-) terminal.
  3. Connect the high frequency antenna to the designated connector on the siren.
  4. Securely fix the siren in a suitable location, such as near the wiper, ensuring it is stable and protected.
Diagram showing the easy DIY installation of the car alarm siren by connecting red and black cables to the car battery.

Figure 2: Simplified diagram of the siren's power connection to the car battery.

Air Pressure Sensor Setup

  1. Locate the on/off button on the car adaptor air sensor and turn it on. The LED light will flash, indicating it is active.
  2. Plug the car adaptor air sensor into your car's cigarette lighter port. The red light will flash, confirming it is working.
  3. The air sensor can be removed and hidden anywhere in the car after it is fully charged (lasts for approximately 5 days on a full charge).
Image showing the car adaptor air sensor and its battery indicator, emphasizing its portability and charging via cigarette lighter.

Figure 3: The car adaptor air sensor, designed for easy plug-and-play operation.

Fifi sori Video Itọsọna

Video 1: Official VJOYCAR installation guide demonstrating the connection of the siren and antenna to the car battery.

Awọn ilana Iṣiṣẹ

Arming ati Disarming System

Use the 2-way LCD pager remote control to arm or disarm the alarm system. When armed, the system monitors for unauthorized entry or significant vibrations.

Video 2: Demonstration of arming and disarming the alarm system using the remote control.

2-Way Pager and Long Distance Monitoring

The system features a 2-way LCD pager remote control that receives notifications from the alarm siren. The RF high-frequency antenna ensures a communication range of up to 1000 meters (in open air conditions).

Image illustrating the 1000-meter range of the 2-way pager alarm system, showing a car in a parking lot and the remote control.

Figure 4: The 2-way pager remote control provides real-time alerts over long distances.

Sensor Functionality

The system incorporates multiple sensors to detect various threats:

Two images: top shows a car door being opened with a red dot indicating air sensor detection; bottom shows a car being towed with a red dot indicating shock sensor detection.

Figure 5: Visual representation of air sensor detecting door/trunk opening and shock sensor detecting car movement.

Video 3: Demonstration of the alarm triggering when a car door is opened.

Video 4: Demonstration of the alarm triggering when the car trunk is opened.

Find Car Function

With just one click on your remote, you can activate a function to help you locate your car in a large parking area.

Image showing a car park with a red location pin indicating the 'Find Car' feature, alongside the two remote keys.

Figure 6: The 'Find Car' feature assists in locating your vehicle.

Adjusting Vibration Sensitivity

The system offers 8 levels of vibration sensitivity, from low to high. You can adjust this setting to suit your environment and prevent false alarms.

Image showing the siren and remote keys with text indicating '8 Level of vibration sensitivity' and '1-8' for adjustment.

Figure 7: Adjusting the vibration sensitivity of the alarm system.

Video 5: Guide on how to adjust the siren's sensitivity using the remote control.

Awọn ipo okunfa

The alarm system supports four different trigger modes:

Image showing the siren and remote keys with text describing the '4 Kinds of Trigger Mode' and their functions.

Olusin 8: Pariview of the four available trigger modes for the alarm system.

Itoju

To ensure the longevity and optimal performance of your VJOYCAR Wireless Car Alarm System, follow these general maintenance guidelines:

Laasigbotitusita

If you encounter issues with your VJOYCAR Wireless Car Alarm System, please consult the following common troubleshooting steps:

Isoro Owun to le Fa / Solusan
Siren does not sound or stops working.
  • Ṣayẹwo Ipese Agbara: Ensure the siren is perfectly installed and both power cables (red and black) have a secure power supply from the car battery.
  • Remote Control Setting: Verify that the 2-way remote control is not set to "auto disarm" mode. In this mode, if the remote is close to the car, the siren may not sound even if the car is shaken, as it disarms automatically.
  • Ipo Mute: Check if the remote control is in "mute" mode (often activated by pressing a specific button, e.g., '#'). In mute mode, the siren will not sound, but the alarm will still notify the 2-way remote control.
  • Ipo imuṣiṣẹ: Confirm that the vibration working mode is activated and on for both 1-way and 2-way remote controls.
  • Olubasọrọ Support: If the issue persists, contact VJOYCAR customer support for further assistance or a potential replacement siren.
False alarms or excessive sensitivity.
  • Ṣatunṣe Ifamọ: The system has 8 levels of vibration sensitivity. Adjust it to a lower level if you are experiencing too many false alarms. Refer to the "Adjusting Vibration Sensitivity" section.
  • Ipo Nfa: Consider changing the trigger mode to one that is less sensitive to minor disturbances, such as Mode 4 which forbids vibration triggers.
Isakoṣo latọna jijin ko dahun.
  • Ṣayẹwo Batiri: Ensure the remote control's battery is not depleted. Replace if necessary.
  • Ibiti: Verify you are within the 1000-meter operating range. Obstacles like buildings can reduce effective range.

For any complex issues or if troubleshooting steps do not resolve the problem, please do not hesitate to contact VJOYCAR customer support. They can provide the latest user manual or specific assistance.

Awọn pato ọja

Ẹya ara ẹrọ Ẹ̀kúnrẹ́rẹ́
Brand VJOYCAR
Iwọn Nkan 1.63 iwon
Package Mefa 7.83 x 6.3 x 3.39 inches
Latọna Alailowaya Bẹẹni
Awọn ẹrọ ibaramu Cars (12-15V power input)
Ibiti o pọju 1000 Meters (RF high frequency antenna)
Ariwo Ipele 125 dB
Awọn sensọ Built-in shock/vibration sensor, built-in air pressure sensor
Iru fifi sori ẹrọ Ṣe-Inú-Ẹ̀rọ (Ṣe-O-Fẹ́ràn-Ẹ)

Atilẹyin ọja ati Support

For warranty information, technical support, or to obtain the latest version of this user manual, please contact VJOYCAR customer service through their official channels. Your satisfaction is important, and they are available to assist with any questions or concerns regarding your product.

O tun le tọka si osise Ilana olumulo (PDF) fun afikun awọn alaye.

Awọn iwe aṣẹ ti o jọmọ - 2-Way LCD Pager Remote Control DIY Install System

Ṣaajuview Eto Itaniji ọkọ ayọkẹlẹ Alailowaya VJOYCAR X6: Fifi sori ẹrọ ati Itọsọna olumulo
Alaye fifi sori ẹrọ ati itọsọna lilo fun Eto Itaniji Ọkọ ayọkẹlẹ Alailowaya VJOYCAR X6. Awọn akoonu ti package ni wiwa, fifi sori igbese-nipasẹ-igbesẹ ti siren, eriali, ati sensọ afẹfẹ, ati awọn ilana okeerẹ fun sisẹ ọna kan ati awọn iṣakoso latọna jijin ọna meji, pẹlu awọn eto okunfa ati awọn atunṣe ifamọ.
Ṣaajuview Itọsọna olumulo T10: Awọn ẹya ara ẹrọ, Awọn pato, ati iṣẹ
Itọsọna olumulo okeerẹ fun ẹrọ ipasẹ GPS T10. Kọ ẹkọ nipa awọn ẹya rẹ, awọn pato hardware, fifi sori ẹrọ, awọn pipaṣẹ SMS fun titele, gbigbọ latọna jijin, awọn itaniji, ati iṣakoso agbara.
Ṣaajuview V70 OBD Car Computer Gauge User Manual
User manual for the V70 OBD car computer gauge, detailing its production description, specifications, operating settings, software updates, data stream parameters, and service procedures.
Ṣaajuview VJOYCAR GPS HUD Technical Specifications and User Guide
Detailed technical specifications, usage instructions, and warranty information for the VJOYCAR GPS Head-Up Display (HUD) for cars and trucks. Learn about its features, power requirements, operating conditions, and warranty policy.
Ṣaajuview Itọsọna olumulo Olutọpa Ọkọ GPS - VJOYCAR
Itọsọna olumulo okeerẹ fun VJOYCAR GPS Vehicle Tracker (Ẹya V2.1), fifi sori fifi sori ẹrọ, iṣeto, iṣẹ ṣiṣe, iṣakoso itaniji, ati laasigbotitusita.
Ṣaajuview VJOYCAR W02 5.5" Head Up Display (HUD) User Manual - Installation, Settings, and Operation
Comprehensive user manual for the VJOYCAR W02 5.5-inch OBDII Head Up Display (HUD). This guide covers installation, main features, detailed settings, common operation procedures, troubleshooting common problems, and technical specifications for safe and convenient driving.