KuWFi C910SP 4G LTE Router Instruction Manual

1. Ifihan

This manual provides detailed instructions for the setup, operation, and maintenance of your KuWFi C910SP 4G LTE Router. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The KuWFi C910SP is a 4G modem with Wi-Fi hotspot capabilities, designed to provide high-speed internet access by converting a 4G SIM card connection into a Wi-Fi network for up to 32 users.

2. Package Awọn akoonu

Daju pe gbogbo awọn ohun ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ. Ti awọn ohun kan ba nsọnu tabi bajẹ, jọwọ kan si atilẹyin alabara.

• KuWFi C910SP 4G LTE Router
• Adapter agbara
• àjọlò Cable
• Itọsọna olumulo

The package includes the KuWFi C910SP router unit, a power adapter for electrical connection, an Ethernet cable for wired network setup, and a user manual for detailed instructions.

3. Ọja Ipariview

3.1. Device Ìfilélẹ

The rear panel of the router features the power input, a reset button, two LAN ports for wired connections, a WAN port for external internet connection, and the dedicated slot for inserting the SIM card.

3.2. Awọn itọkasi

• Atọka Agbara: Ṣe afihan ipo agbara ti ẹrọ naa.
• Atọka Wi-Fi: Fi ipo nẹtiwọọki Wi-Fi han.
• 4G LTE Signal Indicator: Ó ń fi agbára àmì 4G LTE hàn.

4. Eto

4.1. Fifi sori kaadi SIM

1. Rii daju pe olulana ti wa ni pipa.
2. Locate the SIM card slot on the rear panel of the router.
3. Insert a standard-sized 4G SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. Ensure your SIM card is activated and its frequency band is compatible with the router (B1/B3/B7/B8/B20 for 4G LTE FDD; B38/B39/B40/B41 for 4G LTE FDD; B1/B8 for 3G WCDMA).

This image illustrates the compatible SIM card size for the router. Only standard-sized SIM cards are supported. Micro and Nano SIM cards are not compatible and should not be used directly without an adapter.

4.2. Asopọ agbara

1. Connect the power adapter to the router's power input port.
2. Pulọọgi opin miiran ti ohun ti nmu badọgba agbara sinu iṣan itanna boṣewa kan.
3. The power indicator light on the router should illuminate, indicating the device is receiving power.

4.3. Ìsopọ̀ Wi-Fi àkọ́kọ́

1. Wait for the router to boot up completely. The Wi-Fi and 4G LTE signal indicators should stabilize.
2. Lórí kọ̀mpútà tàbí ẹ̀rọ alágbèéká rẹ, wá àwọn nẹ́tíwọ́ọ̀kì Wi-Fi tó wà.
3. Select the network with SSID: CPE_2.4G_001A60.
4. Enter the default Wi-Fi password: 12345678.
5. Once connected, your device should have internet access via the router's 4G connection.

5. Awọn ilana Iṣiṣẹ

5.1. Iwọle si Web Atọka Iṣakoso

Lati tunto awọn eto ilọsiwaju, wọle si awọn olulana web ni wiwo iṣakoso:

1. Rí i dájú pé ẹ̀rọ rẹ ti so mọ́ nẹ́tíwọ́ọ̀kì Wi-Fi ti olulana tàbí nípasẹ̀ okùn Ethernet kan.
2. Ṣii a web ẹrọ aṣawakiri (fun apẹẹrẹ, Chrome, Firefox, Edge).
3. Nínú àdírẹ́sì, tẹ àdírẹ́sì IP àìyẹ̀wọ́: 192.168.10.1 ki o si tẹ Tẹ.
4. On the login page, enter the default username and password: abojuto fun mejeji.
5. Click 'Login' to access the router's settings.

5.2. Basic Wireless Settings

Laarin awọn web ni wiwo, lilö kiri si Wireless Setting > 2.4G Basic Setting to modify your Wi-Fi network details:

• SSID: Change the network name (e.g., "MyHomeWiFi").
• Ọrọigbaniwọle: Update the Wi-Fi password for security.
• Ikanni: Adjust the Wi-Fi channel if experiencing interference.
• Ìbú Bàbá: Select appropriate bandwidth (e.g., 20MHz, 40MHz).

Remember to click 'Save' after making any changes.

6. Awọn Eto To ti ni ilọsiwaju

Awọn web management interface offers various advanced configurations:

6.1. Network Eto

• Eto WAN: Configure the Wide Area Network connection. Default is DHCP.
• LAN Setting: Adjust the router's Local Area Network IP address and subnet mask.
• Eto DHCP: Manage the DHCP server, including IP address range and lease time.
• 4G Setting: Configure 4G dial-up settings, including APN (Access Point Name). You may need to disable SIM PIN and manually set the APN based on your operator's information.
• VPN Setting: Supports OpenVPN, PPTP, and L2TP client configurations.
• Ping Reboot: Configure the router to automatically reboot if it loses internet connectivity (ping target).

6.2. System Admin

• Web Iṣakoso Wiwọle: Manage access to the web ni wiwo.
• Afẹyinti/pada sipo: Save or load router configurations.
• Igbesoke famuwia: Ṣe àtúnṣe firmware ti olulana naa.
• Eto akoko: Configure the device's time and date.
• Atunbere: Tun olulana bẹrẹ.
• Wọle Eto: View system activity and error logs.

6.3. To ti ni ilọsiwaju Eto

• Intranet Passthrough: Configure internal network passthrough rules.
• DTU Setting: Data Transfer Unit settings.
• Remote Help: Enable or disable remote assistance features.
• Eto DMZ: Configure a Demilitarized Zone.
• Iṣaworan ibudo: Set up port forwarding rules.
• Static Route: Configure static routing entries.

7. Laasigbotitusita

If you encounter issues with your KuWFi C910SP router, refer to the following common problems and solutions:

• Ko si Asopọ Ayelujara:
  • Check if the 4G LTE signal indicator is lit and stable.
  • Rii daju pe o ti fi kaadi SIM sii daradara ati muu ṣiṣẹ.
  • Verify the APN settings in the web interface (Network Setting > 4G Setting). Contact your mobile operator for correct APN details.
  • Confirm that your SIM card supports the router's frequency bands.
  • Tun olulana naa ati ẹrọ ti o so pọ mọ.
• Weak Wi-Fi Signal or Frequent Disconnections:
  • Relocate the router to a central position, away from obstacles and interference sources (e.g., microwaves, cordless phones).
  • Adjust the Wi-Fi channel in the web interface (Wireless Setting > 2.4G Basic Setting) to avoid crowded channels.
  • Ensure the router's antennas are properly oriented.
• Ko le Wiwọle Web Àwòrán Ìṣàkóso:
  • Verify that your device is connected to the router's network.
  • Ensure you are typing the correct IP address (192.168.10.1) in the browser.
  • Ko kaṣe ẹrọ aṣawakiri rẹ kuro ati awọn kuki, tabi gbiyanju aṣawakiri miiran.
  • Confirm the login credentials (default: admin/admin).
  • If you have forgotten your password, you may need to perform a factory reset (see Section 8.1).
• Iyara Ayelujara ti o lọra:
  • Check the 4G signal strength. A weak signal will result in slower speeds.
  • Rí i dájú pé kò sí àwọn ẹ̀rọ míràn tó ń lo bandwidth tó pọ̀ jù.
  • Contact your mobile operator to check for network issues in your area.

7.1. Atunto ile-iṣẹ

If troubleshooting steps do not resolve the issue, you can perform a factory reset. This will revert all settings to their default values.

1. With the router powered on, locate the 'Reset' button on the rear panel.
2. Use a paperclip or a thin object to press and hold the 'Reset' button for approximately 10 seconds.
3. Release the button when the router's indicator lights flash.
4. The router will reboot with factory default settings. You will need to reconfigure it.

8. Awọn pato

9. Alaye Aabo

• Do not expose the device to water, fire, or high temperatures.
• Lo oluyipada agbara ti a pese nikan.
• Avoid placing the router near strong electromagnetic fields.
• Ma ṣe gbiyanju lati tunto tabi tun ẹrọ naa funrararẹ.
• Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.

10. Atilẹyin ọja ati Support

KuWFi offers the following support for your C910SP router:

• Agbapada ni kikun-ọjọ 30: Return your undamaged router within 30 days of purchase for any reason to receive a full refund.
• Atilẹyin Didara Osu 12: For 12 months after the purchase date, all quality-related issues are covered with a replacement or full refund.

For further assistance, please contact KuWFi customer service.