summina PockRock Portable Guitar Effects Pedal User Manual

Ọrọ Iṣaaju

The summina PockRock is a compact and versatile multi-effects processor designed for guitarists. It offers a wide range of effects, drum rhythms, and a built-in tuner, making it an ideal tool for practice, songwriting, and performance. This manual provides detailed instructions on how to set up, operate, and maintain your PockRock pedal.

olusin 1: Top view of the summina PockRock Portable Guitar Effects Pedal, showcasing its compact design and control knobs.

Package Awọn akoonu

• 1 x PockRock Effects Pedal
• 1 x 9V DC Power Adapter (EU Plug)
• 1 x Afọwọṣe olumulo (Gẹẹsi)

Note: Guitar and connection cables are not included. 2 AAA batteries for portable use are also not included.

Ṣeto

1. Agbara ẹrọ naa

The PockRock pedal can be powered in two ways:

• Adapter agbara DC: Connect the included 9V DC power adapter to the "DC IN" jack on the pedal and plug it into a standard wall outlet.
• Awọn batiri: For portable use, the pedal can be powered by two AAA batteries (not included). Open the battery compartment on the back of the unit and insert the batteries, ensuring correct polarity.

olusin 2: Ẹyìn view of the PockRock pedal, illustrating the battery compartment and the metal buckle for waist attachment.

2. Connecting Your Equipment

Follow these steps to connect your guitar and audio output devices:

1. So rẹ gita si awọn 1/4" Jack ìṣípò on the side of the pedal.
2. Sopọ awọn 1/4" Output Jack si tirẹ amplifier tabi ohun ni wiwo.
3. Fún ìdánrawò ìdákẹ́jẹ́ẹ́, so agbekọri pọ̀ mọ́ 1/8" Agbekọri Jack.
4. To play along with external audio, connect an MP3 player or other audio source to the 1/8" AUX In Jack.

Nọmba 3: Alaye view of the PockRock's input (top) and output (bottom) jacks, including the 1/4" input, 1/8" Aux In, 1/4" output, and 1/8" headphone jack.

Awọn ilana Iṣiṣẹ

1. Awọn iṣakoso Loriview

The PockRock features several knobs and buttons for intuitive control:

• Agbara Yi pada: Tan/pa a kuro.
• Volume Knob (+VOL -): Satunṣe awọn ìwò o wu iwọn didun.
• Effect Module Knobs: Dedicated knobs for Drive, MOD, DLY/REV, and Drum modules.
• Patch Button: Cycles through preset and user patches.
• Bọtini itaja: Saves user-defined settings to a patch.
• DRUM/VALUE Knob: Controls drum rhythm selection and acts as a value control for tuner.
• Bọlu TONE: Adjusts the tone/brightness of the sound.
• KỌRỌ NIPA: Controls the gain level for distortion effects.
• Cab. Sim. Switch: Toggles cabinet simulation on/off.

Nọmba 4: Alaye view of the PockRock's control panel, highlighting the various knobs and buttons for effect selection and parameter adjustment.

2. Effect Modules and Types

The PockRock features 5 effect modules with a total of 15 effect types:

• Modulu Wakọ: Includes Clean, Overdrive, Distortion, Crunch, Fuzz, Metal.
• MOD (Modulation) Module: Includes Chorus, Flanger, Phaser, Tremolo.
• DLY/REV (Delay/Reverb) Module: Includes Delay, Echo, Sala, Reverb.
• Modulu ilu: Provides 40 different drum rhythms.

Rotate the respective module knob to select the desired effect type within that module. The LED display will show the current effect or patch number.

3. Patch Management

The pedal offers 32 patches:

• 16 Preset Patches: Factory-set tones that cannot be overwritten.
• 16 User Patches: Customizable slots where you can save your own effect combinations and settings.

To cycle through patches, press the Patch button. To save your current settings to a user patch, adjust your desired effects and then press and hold the Itaja button until the display indicates the patch has been saved.

4. Drum Rhythms

The PockRock includes 40 meticulously designed drum rhythms. To activate and select a drum rhythm, use the DRUM/VALUE knob. Rotate the knob to browse through the available rhythms. The tempo can often be adjusted by holding the DRUM/VALUE knob and rotating it, though specific tempo control might vary by model.

5. Tuner Function

The built-in tuner allows for accurate guitar tuning:

1. To access the tuner, press and hold the DRUM/VALUE control for approximately 2 seconds. The display will change to indicate tuner mode.
2. Play one guitar string at a time. The display will show the detected note and indicate if it is flat, sharp, or in tune.
3. Adjust the string tension until the display shows the desired pitch is correct.
4. To exit the tuner, press the DRUM/VALUE control once.

Figure 5: Visual guide to using the PockRock's integrated tuner function, showing how to activate it and interpret the display for accurate tuning.

Itoju

Proper maintenance ensures the longevity and optimal performance of your PockRock pedal.

• Ninu: Use a soft, dry cloth to clean the exterior of the pedal. Avoid using abrasive cleaners or solvents, which can damage the finish and internal components.
• Rirọpo Batiri: If using batteries, replace them when the power indicator dims or the unit behaves erratically. Always use fresh AAA batteries and dispose of old batteries responsibly.
• Ibi ipamọ: When not in use for extended periods, store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for a long time to prevent leakage.
• Mimu: Avoid dropping the pedal or subjecting it to strong impacts, as this can damage internal circuitry.

Laasigbotitusita

If you encounter issues with your PockRock pedal, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact summina customer support.

Awọn pato

Figure 6: Diagram illustrating the physical dimensions of the PockRock pedal (13cm length, 8.5cm width, 3cm height).

Atilẹyin ọja ati Support

Alaye Atilẹyin ọja: Specific warranty terms and conditions for your summina PockRock pedal are typically provided with your purchase documentation. Please refer to the warranty card or contact your retailer for details regarding coverage and duration.

Atilẹyin Onibara: For technical assistance, troubleshooting beyond this manual, or inquiries about your product, please contact summina customer support through their official website or the contact information provided with your product packaging. When contacting support, please have your product model (PockRock) and purchase details ready.