Philips LED Emergency Luminaire LEDR1W5 Instruction Manual

1. Ọja Ipariview

The Philips LED Emergency Luminaire LEDR1W5 is designed to provide reliable illumination during power outages. Featuring high-life LED technology and a rechargeable battery, it offers up to 90 minutes of emergency lighting. Its flexible and adjustable spotlights ensure excellent light distribution, providing high brightness cool white lighting (6,500 Kelvin) with a 2-watt consumption.

Awọn ẹya pataki pẹlu:

• Double-head emergency light design.
• Rechargeable NiCd battery providing up to 90 minutes of operation.
• LED indicator for charge status and a button for manual performance checks.
• Suitable for wall or ceiling installation.
• Operates on 120-277V with a luminous flux of 220 lumens.

2. Awọn Ilana Aabo pataki

Please read and follow all safety instructions carefully before installing or operating this product. Keep this manual for future reference.

• IKILO: Ewu ti ina-mọnamọna. Ge asopọ agbara ṣaaju fifi sori ẹrọ tabi iṣẹ.
• Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
• Do not use outdoors. This luminaire is designed for indoor use only.
• Rii daju pe ipese voltage is compatible with the luminaire's requirements (120-277V).
• Maṣe gbe soke nitosi gaasi tabi awọn igbona ina.
• Do not allow power supply cords to touch hot surfaces.
• The battery is rechargeable and included. Do not attempt to replace the battery with an unapproved type.
• Operating ambient temperature range: 0°C to 40°C (32°F to 104°F).

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ati ti ko bajẹ ṣaaju tẹsiwaju pẹlu fifi sori ẹrọ.

• Philips LED Emergency Luminaire LEDR1W5
• Rechargeable NiCd Battery (pre-installed or separate)
• Ohun elo iṣagbesori (awọn skru, awọn ìdákọró)
• Light Dimmer (as listed in product specifications, though its function with this emergency light is typically for testing)

4. Itọsọna fifi sori ẹrọ

4.1 iṣagbesori Aw

The Philips LEDR1W5 emergency luminaire is designed for versatile installation on either walls or ceilings. Choose a location that provides optimal light coverage for emergency egress paths.

4.2 Onirin

Connect the luminaire to a non-switched 120-277V AC power supply. Ensure all wiring connections are secure and comply with local electrical codes. The luminaire will automatically charge its internal battery when connected to power.

4.3 Fifi sori batiri (ti ko ba fi sii tẹlẹ)

If the battery is not pre-installed, carefully connect it to the designated battery connector inside the luminaire housing. Ensure correct polarity. After installation, allow the unit to charge for at least 24 hours before its first operational test to ensure full battery capacity.

5. Isẹ

5.1 Iṣiṣẹ Aifọwọyi

Once properly installed and connected to a continuous power supply, the Philips LEDR1W5 luminaire will automatically activate its LED lights when the main power supply is interrupted. It will provide emergency lighting for up to 90 minutes on a fully charged battery.

5.2 Afowoyi igbeyewo

A push button is provided on the unit for manual performance checks. Press and hold this button to simulate a power outage. The LED lights should illuminate, indicating that the battery and lighting circuit are functional. Release the button to return to charging mode.

5.3 Charge Status Indicator

The luminaire features an LED indicator that displays the battery's charge status. A green light typically indicates that the battery is charging and fully charged. Refer to the specific labeling on your unit for detailed indicator meanings.

6. Itọju

6.1 batiri Itọju

To ensure optimal battery life and performance, it is recommended to perform a monthly 30-second test by pressing the test button. A full 90-minute discharge test should be conducted annually. If the unit fails to provide adequate light duration during a test, the battery may need replacement.

6.2 Ninu

Clean the exterior of the luminaire periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic housing. Ensure the unit is disconnected from power before cleaning.

7. Laasigbotitusita

• Iṣoro: Luminaire does not light up during a power outage tabi idanwo.
  Ojutu:
  • Check if the unit is properly connected to a continuous power supply.
  • Ensure the battery is correctly installed and fully charged (allow 24 hours for initial charge).
  • Verify the circuit breaker for the power supply is not tripped.
  • Batiri naa le wa ni opin igbesi aye rẹ ati pe o nilo rirọpo.
• Iṣoro: Lights are dim or do not last for 90 minutes.
  Ojutu:
  • The battery may not be fully charged. Ensure continuous power supply for at least 24 hours.
  • The battery may be aging and losing capacity. Consider battery replacement.
• Iṣoro: Charge status indicator is not lit.
  Ojutu:
  • Ṣayẹwo asopọ ipese agbara.
  • Rii daju pe batiri naa ti sopọ.
  • Contact customer support if the issue persists after checking connections.

8. Imọ ni pato

9. Atilẹyin ọja ati Onibara Support

9.1 atilẹyin ọja Alaye

This Philips LED Emergency Luminaire LEDR1W5 comes with a 3-odun atilẹyin ọja, which includes the battery. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 Onibara Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Philips customer support. Refer to the Philips webaaye tabi apoti ọja fun alaye olubasọrọ lọwọlọwọ julọ.