ARCADE1UP Adjustable Height Stool (Joust) Instruction Manual

1. Ifihan

The ARCADE1UP Adjustable Height Stool (Joust) is designed to provide a comfortable and themed seating solution for your Arcade1Up game cabinet. This officially licensed stool features iconic Joust artwork and is built for durability and user comfort during extended gaming sessions. Its adjustable height feature makes it versatile for various arcade setups.

Image: The ARCADE1UP Joust Adjustable Height Stool, showcasing its design and chrome legs.

2. Alaye Aabo

Please read and understand all safety instructions before assembling or using the stool. Failure to follow these instructions may result in injury or damage to the product.

• Ensure the stool is used on a stable, level surface to prevent tipping.
• Do not overload the stool beyond its maximum weight capacity.
• Pa ọwọ ati ika mọ kuro ninu awọn ẹya gbigbe lakoko atunṣe giga.
• Periodically check all bolts and fasteners to ensure they are tight and secure.
• Keep away from open flames or excessive heat.

3. Package Awọn akoonu

Rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ apejọ:

• 1 x Stool Seat (Joust themed)
• 1 x Set of Chrome Legs (Base)
• 4 x Leg Extenders (for taller height setting)
• 1 x Hardware Pack (screws, washers, Allen wrench)
• 1 x Iwe ilana

4. Eto

Awọn ilana Apejọ

Assembly is straightforward and typically takes minimal time. Follow these steps:

1. Fi pẹ̀lẹ́pẹ̀lẹ́ tú gbogbo àwọn èròjà inú àpótí náà kí o sì gbé wọn sí orí ilẹ̀ tó mọ́ tónítóní kí ó má ​​baà jẹ́ kí wọ́n fọ́.
2. Attach the chrome legs to the underside of the stool seat using the provided screws and Allen wrench. Ensure all screws are tightened securely.
3. For the 21.5-inch height setting, no leg extenders are needed.
4. For the 29.5-inch height setting, insert the four leg extenders into the bottom of each chrome leg. Ensure they click into place or are secured as per the specific hardware provided.

Image: Diagram illustrating the two adjustable height settings of the stool (21.5 inches and 29.5 inches).

5. Awọn ilana Iṣiṣẹ

The ARCADE1UP stool is designed for simple use. Once assembled to your desired height, it provides stable seating. To switch between heights, you will need to remove or attach the leg extenders as described in the assembly section. The stool does not swivel.

Image: Close-up of the Joust themed stool seat, highlighting the detailed artwork.

6. Itọju

To ensure the longevity and appearance of your ARCADE1UP stool, follow these simple maintenance guidelines:

• Ninu: Wipe the stool with a dry cloth to remove dust and light dirt. For more stubborn marks on the vinyl seat, use a damp cloth with mild soap and water, then dry thoroughly. Avoid abrasive cleaners or solvents.
• Itọju Chrome: The chrome legs can be cleaned with a soft, dry cloth. For smudges or fingerprints, a chrome cleaner can be used sparingly, followed by buffing to a shine.
• Awọn iṣayẹwo deede: Periodically inspect all connections and fasteners to ensure they remain tight. Re-tighten if necessary.

7. Laasigbotitusita

If you encounter any issues with your ARCADE1UP stool, consider the following common solutions:

• Ìgbẹ́ rẹ̀ ń gbọ̀n rìrì: Ensure all assembly screws are fully tightened. Check that the stool is on a flat, level surface. If using leg extenders, ensure they are fully inserted and seated correctly.
• Iṣoro ni atunṣe giga: Ensure no debris is obstructing the leg extender insertion points. Apply gentle, even pressure when inserting or removing extenders.
• Scratches on chrome: Minor scratches can sometimes be buffed out with a specialized chrome polish. For deeper scratches, professional repair may be required.

If problems persist, please refer to the Warranty and Support section.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information or technical support regarding your ARCADE1UP Adjustable Height Stool, please contact ARCADE1UP directly through their official webojula tabi onibara iṣẹ awọn ikanni. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Image: The official ARCADE1UP logo.