SKYRC T100 Dual Balance Charger Instruction Manual

1. Ifihan

The SKYRC T100 is a twin-channel balance charger designed for various battery chemistries. It features two independent charging circuits, allowing simultaneous charging of different battery types and configurations. This charger is suitable for LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, and Pb batteries, offering a maximum charging power of 100W (50W per channel) and a charging current of up to 5A.

Its compact design includes convenient front-loading balance and XT60 ports, enhancing ease of use and safety.

2. Awọn ilana aabo

Read all instructions and warnings carefully before use. Failure to do so may result in property damage, personal injury, or death.

• Maṣe fi ṣaja silẹ laini abojuto lakoko iṣẹ.
• Ensure the charger is connected to an AC 100-240V power source only.
• Do not attempt to charge damaged or swollen batteries.
• Always use the correct battery type and cell count settings for your battery. Incorrect settings can cause fire or explosion.
• Charge batteries in a fire-safe area, away from flammable materials.
• Keep the charger away from moisture, heat, and direct sunlight.
• Do not short-circuit the charging outputs.
• Jeki kuro ni arọwọto awọn ọmọde.
• Ge asopọ agbara agbara nigbati o ko ba wa ni lilo.

3. Awọn ẹya Ọja

• Dual-Channel Charging: Two independent circuits for simultaneous charging of different battery types and configurations.
• Multi-Chemistry Support: Compatible with LiPo, LiFe, LiIon, LiHV (2-4 cells), NiMH, NiCd (6-8 cells), and Pb (6/12V) batteries.
• Integrated XT60 Connectors: Embedded XT60 ports for convenient and secure connection, preventing reverse polarity.
• Gaju gigatage Yiye: Han batiri voltage with three decimal places for precise monitoring during charging and measurement.
• AGM & Cold Charge Modes: Supports charging of Absorbent Glass Mat (AGM) batteries and allows charging of Pb batteries at low temperatures.
• Apẹrẹ Iwapọ: Space-saving form factor with front-loading ports.
• Aago Aabo: Adjustable safety timer (1-720 minutes & OFF) to prevent overcharging.

Aworan 3.1: Iwaju view of the SKYRC T100 Dual Balance Charger, showing the LCD display, control buttons, and dual charging ports with XT60 connectors.

Image 3.2: Illustration highlighting the multi-purpose charging capabilities and compact size of the SKYRC T100 charger, indicating 5A and 50W per channel.

Image 3.3: The SKYRC T100 charger with two batteries connected, demonstrating its twin-channel charging feature. The display shows charging status for both channels A and B.

Image 3.4: Close-up of the SKYRC T100's LCD display, showing battery voltage with three decimal places, indicating high measurement accuracy.

Image 3.5: The SKYRC T100 charger depicted in a cold, snowy environment, illustrating its capability to charge PB batteries using AGM and Cold Charge modes at low temperatures.

Aworan 3.6: Isunmọ view of the embedded XT60 battery connectors on the SKYRC T100 charger, designed for secure and convenient battery connection.

4. Package Awọn akoonu

• 1x SKYRC T100 Dual Balance Charger
• 1x Okun Agbara AC
• Ilana Afowoyi (iwe yii)

5. Eto

1. Yọọ kuro: Fi ìṣọ́ra yọ charger àti gbogbo àwọn ohun èlò míì kúrò nínú àpótí náà.
2. Asopọ agbara: Connect the supplied AC power cord to the charger's AC input port and then plug it into a suitable AC 100-240V wall outlet. The charger will power on, and the LCD display will illuminate.
3. Asopọ batiri: For each battery you wish to charge, connect its main power lead to the XT60 port (A or B) and its balance lead (if applicable) to the corresponding balance port (2-4S) on the charger. Ensure correct polarity.

6. Awọn ilana Iṣiṣẹ

The SKYRC T100 features four control buttons: BATT/PROG Stop, DEC STATUS (left arrow), INC STATUS (right arrow), and Tẹ Bẹrẹ.

6.1 Lilọ kiri lori Akojọ aṣayan

• Lo awọn DEC STATUS ati INC STATUS buttons to scroll through menu options or adjust values.
• Tẹ Tẹ Bẹrẹ to confirm a selection or enter a submenu.
• Tẹ BATT/PROG Stop to go back to the previous menu or stop an ongoing process.

6.2 Charging Procedure (General)

1. Yan ikanni: The charger will typically display information for both channels. Use the arrow buttons to highlight the channel (A or B) you wish to configure.
2. Yan Iru Batiri: Tẹ Tẹ Bẹrẹ to enter the battery type selection. Use the arrow buttons to choose the correct battery chemistry (e.g., LiPo, NiMH, Pb) and press Tẹ Bẹrẹ lati jẹrisi.
3. Set Charge Mode: Select the desired charge mode (e.g., Balance Charge, Fast Charge, Storage, Discharge for Lithium batteries; Charge for NiMH/NiCd/Pb).
4. Ṣatunṣe Awọn paramita: Set the charge current (e.g., 0.1A-5.0A) and cell count/voltage (for Lithium batteries) using the arrow buttons. Ensure these settings match your battery's specifications.
5. Bẹrẹ gbigba agbara: Once all parameters are set, press and hold the Tẹ Bẹrẹ button for a few seconds to initiate the charging process. The charger will perform a pre-charge check.
6. Bojuto Ilọsiwaju: The LCD will display real-time charging information, including current, voltage, and charged capacity.
7. Duro gbigba agbara: To stop charging at any time, press the BATT/PROG Stop button. The charger will automatically stop when the battery is fully charged.

6.3 Specific Charging Modes

• Balance Charge (LiPo/LiFe/LiIon/LiHV): Recommended for Lithium batteries to ensure all cells are charged to the same voltage, extending battery life. Requires balance lead connection.
• Charge (NiMH/NiCd/Pb): Standard charging mode for these battery types.
• AGM Mode (Pb Battery): Select this mode for Absorbent Glass Mat (AGM) lead-acid batteries.
• Cold Charge Mode (Pb Battery): Use this mode when charging Pb batteries in low-temperature environments.

7. Itọju

• Ninu: Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Afẹfẹ: Rii daju pe awọn ṣiṣi atẹgun ti ṣaja ko kuro ninu eruku ati idoti lati ṣe idiwọ igbona.
• Ibi ipamọ: Tọ́jú charger náà sí ibi tí ó tutù tí ó sì gbẹ, tí kò sí ìmọ́lẹ̀ oòrùn àti ọ̀rinrin nígbà tí o kò bá lò ó.
• Ayẹwo USB: Máa ṣe àyẹ̀wò gbogbo àwọn okùn àti àwọn asopọ̀ lẹ́ẹ̀kọ̀ọ̀kan fún àmì ìbàjẹ́ tàbí ìbàjẹ́. Rọ́pò àwọn ohun tí ó bàjẹ́ lẹ́sẹ̀kẹsẹ̀.

8. Laasigbotitusita

• Charger does not power on:
  • Check if the AC power cord is securely connected to both the charger and the wall outlet.
  • Rí i dájú pé ihò ìta ògiri ní agbára.
• Gbigba agbara ko bẹrẹ:
  • Ensure the battery is correctly connected to the charger (main and balance leads, if applicable).
  • Verify that the battery type and cell count settings match the connected battery.
  • Check for any error messages on the LCD display and refer to the manual for their meaning.
  • Ensure you have pressed and held the Tẹ Bẹrẹ bọtini lati pilẹ gbigba agbara.
• Ifiranṣẹ aṣiṣe ti han:
  • Common errors include 'Connection Break', 'Cell Error', 'Voltage Error'. Consult the full manual for specific error code interpretations and solutions.
  • Disconnect and reconnect the battery, then restart the charging process.
• Battery not fully charged:
  • Check the set charge current; a lower current will take longer.
  • Ensure the safety timer is not set too short.
  • Verify the battery's health; a degraded battery may not reach full capacity.

9. Awọn pato

Image 9.1: Diagram showing the dimensions of the SKYRC T100 charger: 90mm width, 100mm depth, and 127mm height.

10. Atilẹyin ọja ati Support

SKYRC products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official SKYRC webaaye tabi kan si olupin agbegbe rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.