1. Ifihan
The INKBIRDPLUS INK-IFT03 is a non-contact infrared thermometer designed for accurate surface temperature measurement across a wide range of applications. This device utilizes laser technology to provide quick and precise readings, making it suitable for cooking, pizza ovens, reptile enclosures, automotive diagnostics, and various industrial and household tasks. It features adjustable emissivity, a backlit LCD, and unit switching between Celsius and Fahrenheit.
Image 1.1: The INKBIRDPLUS INK-IFT03 Infrared Thermometer is versatile for many uses.
2. Alaye Aabo
Jọ̀wọ́ ka gbogbo ìkìlọ̀ ààbò dáadáa kí o tó lo ọjà yìí.
- Not for Human Use: This infrared thermometer is designed for measuring surface temperatures of objects only. It is KO intended for measuring human body temperature.
- Aabo lesa: The device emits a laser beam. Do not irradiate human eyes directly or indirectly with the laser at any time. Avoid pointing the laser at reflective surfaces that could redirect the beam into eyes.
- Ayika Ṣiṣẹ: Use the device within its specified operating temperature range. Avoid exposure to extreme temperatures, humidity, or direct sunlight.
- Ninu: Do not immerse the device in water. Clean with a damp aṣọ gẹ́gẹ́ bí a ti pàṣẹ rẹ̀ nínú apá Ìtọ́jú.
- Mimu Batiri: Ensure correct battery polarity. Remove batteries if the device will not be used for an extended period to prevent leakage. Dispose of used batteries responsibly.
Image 2.1: This device is not intended for measuring human body temperature.
3. Ọja Ipariview
Familiarize yourself with the components of your INKBIRDPLUS INK-IFT03 Infrared Thermometer:
Image 3.1: Labeled components of the INKBIRDPLUS INK-IFT03.
- Ohun tó ń fa ìwọ́n: Press and hold to activate the laser and take a temperature reading.
- Ifihan LCD: Shows temperature readings, unit, emissivity, and other indicators.
- Backlight/Laser Button: Toggles the backlight and laser on/off. Press and hold for 2-3 seconds to switch between °C and °F.
- Bọtini oke: Used to increase values when adjusting settings like emissivity.
- Bọtini isalẹ: Used to decrease values when adjusting settings like emissivity.
- Bọtini Yipada Ipo: Cycles through various display modes and settings (e.g., Emissivity, High/Low Alarm).
- IR sensọ: Detects infrared radiation emitted by the target object.
- Lẹnsi infurarẹẹdi: Focuses infrared radiation onto the sensor.
- Abala Batiri: Batiri 9V ni o wa ninu ile naa.
4. Eto
4.1 Fifi sori batiri
The INKBIRDPLUS INK-IFT03 requires one 9V battery (included). To install or replace the battery:
- Wa ideri ibi ipamọ batiri naa lori ọwọ ti iwọn otutu naa.
- Ṣii ideri iyẹwu batiri naa.
- Insert a new 9V battery, ensuring the correct polarity (+/-).
- Pa ideri batiri naa ni aabo.
Ẹrọ naa ti ṣetan fun lilo.
5. Awọn ilana Iṣiṣẹ
5.1 Ìwọ̀n Ìwọ̀n Òtútù Pàtàkì
- Tọ́ka sí ibi tí a fẹ́ tọ́jú thermal sí.
- Tẹ mọlẹ Iwọn wiwọn. The laser pointer will activate, indicating the measurement area.
- The temperature reading will appear on the LCD display. For more accurate readings, hold the trigger for 2-3 seconds.
- Release the trigger to hold the reading on the display. The device will automatically shut off after 30 seconds of inactivity to conserve battery.
5.2 Ijinna si Ipin Aami (D:S)
The INK-IFT03 has a Distance to Spot Ratio (D:S) of 16:1. This means that at a distance of 16 units from the target, the measurement spot size will be 1 unit. For example, if you are 16 inches away from an object, the thermometer will measure a 1-inch diameter spot. To ensure accurate readings, make sure the target area is larger than the spot size, especially when measuring from a distance.
Image 5.1: Understanding the 16:1 Distance to Spot Ratio.
5.3 Yipada Awọn iwọn otutu (°C/°F)
Láti yípadà láàrín Celsius (°C) àti Fahrenheit (°F):
- With the device powered on, press and hold the Backlight / lesa bọtini for approximately 2-3 seconds.
- The unit displayed on the LCD will change.
Image 5.2: Switching between Celsius and Fahrenheit display.
5.4 Ìtújáde Tí A Lè Ṣàtúnṣe
Emissivity (E) is a measure of an object's ability to emit infrared energy. Different materials have different emissivity values. For accurate temperature readings, it is important to adjust the thermometer's emissivity setting to match the target material. The INK-IFT03 has an adjustable emissivity range of 0.1 to 1.0.
Láti ṣàtúnṣe ìtújáde:
- Tẹ awọn Bọtini Yipada Ipo repeatedly until "EMS" appears on the bottom of the LCD display.
- Lo awọn Key Key or Bọtini isalẹ to adjust the emissivity value (e.g., 0.95 for most organic materials, 0.98 for ice, 0.94 for oil).
- Tẹ awọn Iwọn wiwọn lati fipamọ eto ati pada si ipo wiwọn.
Image 5.3: Adjusting emissivity for different materials like oil and ice.
Wo tabili ni isalẹ fun awọn iye itujade ti o wọpọ:
| Ohun elo | Emissivity | Ohun elo | Emissivity |
|---|---|---|---|
| Aluminiomu (oxidized) | 0.20-0.40 | Iwe | 0.90 |
| Brass (oxidized) | 0.61 | Iyanrin | 0.90 |
| Iron (oxidized) | 0.78 | Amo | 0.92-0.96 |
| Idapọmọra | 0.95 | Omi | 0.93 |
| Nja | 0.95 | Yinyin | 0.98 |
| Igi | 0.90 | Ṣiṣu | 0.95 |
| Roba | 0.95 | Epo | 0.94 |
| Kun | 0.93 | Awọ Eniyan | 0.98 |
5.5 Miiran Awọn iṣẹ
- Imọlẹ ẹhin: The LCD screen has a backlight for easy reading in low-light conditions.
- Atọka Batiri Kekere: An icon will appear on the display when the battery level is low, indicating it's time for replacement.
- Itaniji giga/Kekere: The device may feature adjustable high and low temperature alarms. Consult the on-screen prompts using the Mode button to set these if available.
6. Itọju
6.1 Ninu ẹrọ naa
Láti rí i dájú pé àwọn ìkà tó péye àti láti mú kí ìwọ̀n thermometer rẹ pẹ́ sí i:
- Fifọ lẹnsi: The infrared lens is the most delicate part. Clean it carefully using a soft, damp cloth or cotton swab with a small amount of rubbing alcohol. Do not use abrasive cleaners or solvents.
- Isọsọ ile: Nu ile ẹrọ pẹlu ipolowoamp cloth and mild soap. Do not immerse the device in water.
6.2 Batiri Rirọpo
When the low battery indicator appears on the display, replace the 9V battery as described in Section 4.1. Always use a fresh, high-quality 9V battery.
6.3 Ibi ipamọ
Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko ni tan-an | Batiri ti ku tabi ti ko tọ | Rọpo batiri 9V, ki o rii daju pe o pe polarity. |
| Awọn kika ti ko pe | Eto itujade ti ko tọ Distance to spot ratio exceeded Lẹnsi jẹ idọti Target object is too small | Adjust emissivity to match the material (Section 5.4). Move closer to the target object. Clean the infrared lens (Section 6.1). Ensure the target is larger than the measurement spot. |
| "HI" or "LO" displayed | Temperature is outside the measurement range | The device cannot measure temperatures beyond -50°C~750°C / -58°F~1328°F. |
| Lesa ko ṣiṣẹ | Laser disabled or malfunction | Press the Backlight/Laser button to toggle the laser. If it still doesn't work, contact support. |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Orukọ awoṣe | INK-IFT03 |
| Iwọn otutu | -50 ° C ~ 750 ° C / -58 ° F ~ 1328 ° F |
| Distance Spot Ratio (D:S) | 16:1 |
| Emissivity | adijositabulu 0.1-1.0 |
| Akoko Idahun | Awọn aaya 0.5 |
| Ifihan Iru | LCD iboju pẹlu Backlight |
| Orisun agbara | Batiri 1 x 9V (pẹlu) |
| Tiipa aifọwọyi | 30 aaya |
| Pataki Awọn ẹya ara ẹrọ | Backlit, Unit Switch (°C/°F), Low Battery Indicator, High/Low Temp Alarm |
| Ohun elo | Ṣiṣu |
| Iwọn Nkan | 340 g |
| Asopọmọra Technology | Infurarẹẹdi |
| Olupese | INKBIRDPLUS |
| Ilu isenbale | China |
9. atilẹyin ọja Information
INKBIRDPLUS products are manufactured to high-quality standards. This product typically comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official INKBIRDPLUS website for detailed warranty terms and conditions, including duration and coverage specifics. Keep your purchase receipt as proof of purchase for warranty claims.
10. Atilẹyin
For technical assistance, product inquiries, or warranty claims, please contact INKBIRDPLUS customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model (INK-IFT03) and purchase details ready.
Osise Webojula: www.inkbird.com (Note: This is a general Inkbird website, specific support contact may vary by region.)
