Ọrọ Iṣaaju
O ṣeun fun riraasing the beFree Sound BFS-Shelf Speaker Bluetooth LED Dancing Water Multimedia Speakers. This manual provides essential information for the safe and efficient operation of your new speakers. Please read it thoroughly before use and retain it for future reference.
These speakers combine clear audio output with dynamic LED lighting and dancing water effects, enhancing your listening experience.
Package Awọn akoonu
Rii daju pe gbogbo awọn nkan wa ninu package:
- 2 x beFree Sound Dancing Water Speakers
- Okun Agbara USB 1 x 6 ẹsẹ
- 1 x 6-foot 3.5mm Audio Cable
Ọja Pariview
Familiarize yourself with the components of your beFree Sound speakers.
Aworan: Iwaju view of two beFree Sound dancing water speakers, showcasing the active LED lights and water jets.
Image: Rear panel of a beFree Sound speaker, detailing the DC 5V power input, AUX input, USB port, and control buttons.
Awọn iṣakoso ati awọn ibudo:
- Iṣawọle DC 5V: For power connection via USB cable.
- Iṣawọle AUX: For wired audio connection using the 3.5mm audio cable.
- Ibudo USB: For connecting to a power source or audio source (if supported by device).
- Bọtini Agbara / Ipo: Turns the speakers on/off and switches between input modes.
- Awọn iṣakoso iwọn didun: Ṣe atunṣe ipele iṣelọpọ ohun.
- Atọka LED: Shows power status and Bluetooth pairing status.
Awọn ilana iṣeto
1. Asopọ agbara:
- Connect the small end of the provided USB power cable to the DC 5V port on the back of the main speaker.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a powered USB port on a computer.
- Ensure the power source provides 5V DC.
2. Speaker Interconnection:
- Connect the secondary speaker to the main speaker using the integrated audio cable extending from the secondary speaker. This cable typically plugs into a dedicated output port on the main speaker.
Aworan: Apa view of the two speakers, illustrating the cable connection between them.
3. Agbara Ibẹrẹ Tan:
- Tẹ mọlẹ Agbara / Ipo button on the main speaker until the LED indicator lights up.
- The speakers will typically enter Bluetooth pairing mode automatically upon first power-on, indicated by a flashing LED.
Awọn ilana Iṣiṣẹ
Asopọ Bluetooth:
- Ensure the speakers are powered on and in Bluetooth pairing mode (LED indicator flashing).
- On your audio device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "beFree Sound" or a similar name from the list of devices.
- Once connected, the LED indicator will typically stop flashing and remain solid.
- You can now play audio wirelessly from your device.
AUX (Wired) Connection:
- So ọkan opin ti awọn 3.5mm iwe USB si awọn AUX input port on the main speaker.
- Connect the other end of the 3.5mm audio cable to the headphone jack or audio output port of your audio device.
- Tẹ awọn Agbara / Ipo button to switch to AUX input mode if the speakers do not automatically detect the wired connection.
Iṣakoso iwọn didun:
- Use the volume control buttons on the speaker to adjust the output volume.
- You can also control the volume from your connected audio device.
LED Lights and Dancing Water:
The speakers feature integrated LED lights and water jets that react to the audio being played. This effect is automatic and does not require separate activation.
Image: The beFree Sound speakers in an ambient setting, demonstrating the visual effect of the LED lights and dancing water.
Itọju ati Itọju
- Ninu: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or solvents.
- Omi: The speakers contain water for the dancing effect. They are designed to be leak-proof, but avoid tilting or shaking them excessively. The product is ko omi sooro externally; do not expose to splashes or immerse in water.
- Ibi ipamọ: Tọju awọn agbohunsoke ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Mimu: Handle the speakers with care to prevent damage to the internal components or the water chamber.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cable not connected properly; USB power source not active. | Ensure USB cable is securely connected to both speaker and power source. Verify power source is active. |
| Ko si ohun | Volume too low; incorrect input mode; device not connected; audio cable faulty. | Increase speaker and device volume. Press Mode button to select correct input (Bluetooth/AUX). Re-pair Bluetooth or re-connect AUX cable. Test with a different audio cable if using AUX. |
| Bluetooth ko so pọ | Speakers not in pairing mode; device Bluetooth off; too far from speakers. | Ensure speakers are flashing LED (pairing mode). Turn device Bluetooth off and on. Move device closer to speakers (within 10 meters). |
| Water not dancing or lights not working | No audio playing; audio volume too low. | Ensure music is playing and volume is sufficiently high for the effects to activate. |
Awọn pato
| Orukọ awoṣe | BFS-Shelf Speaker |
| Brand | beFree Ohun |
| Agbọrọsọ Iru | Multimedia |
| Asopọmọra Technology | Bluetooth, USB |
| Imọ-ẹrọ Ibaraẹnisọrọ Alailowaya | Bluetooth |
| Orisun agbara | Corded Electric (DC 5V via USB) |
| Agbọrọsọ Agbara Ijade ti o pọju | 12 Wattis |
| Idahun Igbohunsafẹfẹ | 220Hz - 13000Hz |
| Ipalara | 4 ohm |
| Ọja Mefa | 8.5"D x 6"W x 3"H |
| Iwọn Nkan | 1.52 iwon |
| Ohun elo | Ṣiṣu |
| Omi Resistance Ipele | Not Water Resistant (internal water for effect only) |
| LED Water Jets | 5 fún agbọrọsọ kọ̀ọ̀kan |
Atilẹyin ọja ati Support
The beFree Sound BFS-Shelf Speaker comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact beFree Sound customer service directly.
Please visit the official beFree Sound webaaye fun alaye atilẹyin ti ode-ọjọ julọ.
