REBEL RB-0003 3-in-1 Detector User Manual
Awoṣe: RB-0003
1. Ifihan
Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.
The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.
2. Alaye Aabo
- Always exercise caution when working near detected objects.
- Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
- Jẹ́ kí ẹ̀rọ náà gbẹ kí ó sì mọ́. Má ṣe fi í sí ojú ọrinrin tàbí ooru tó le koko.
- Do not attempt to open or modify the device. Repairs should only be performed by qualified personnel.
- Yọ awọn batiri kuro ti ẹrọ naa kii yoo lo fun akoko ti o gbooro sii.
3. Ọja Ipariview
Familiarize yourself with the components of your REBEL RB-0003 detector:
olusin 1: Iwaju view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.
olusin 2: Ẹyìn view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.
- Iboju ifihan: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
- Bọtini Yan: Used to switch between detection modes (Metal, Wood, AC Cable).
- Agbègbè Sensọ: Located on the back of the device, this area must be flush against the surface for accurate readings.
- Abala Batiri: Located on the back, for battery installation.
4. Eto
4.1. Fifi sori batiri
- Open the battery compartment cover on the back of the device (refer to Figure 2).
- Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
- Pa ideri batiri naa ni aabo.
The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.
5. Awọn ilana Iṣiṣẹ
5.1. Gbogbogbo isẹ
- Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
- Tẹ awọn Yan button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
- Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
- Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.
5.2. Metal Detection
In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.
- Select the Metal detection mode.
- Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
- A distinct audio alert or visual indicator will confirm the presence of metal.
5.3. Wood Detection
The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.
- Switch to Wood detection mode.
- Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
- Mark the detected areas for reference.
5.4. AC Cable Detection
The RB-0003 is capable of detecting live AC 90-250V cables.
- Select the AC Cable detection mode.
- Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage ti ri.
- Iṣọra: Always assume wires are live until confirmed otherwise by a qualified electrician.
6. Itọju
- Ninu: Mu ẹrọ naa nu pẹlu asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
- Ibi ipamọ: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Rirọpo Batiri: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko tan. | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Ṣayẹwo polarity batiri tabi ropo awọn batiri. |
| Awọn kika ti ko pe. | Low battery, improper contact with surface, or environmental interference. | Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields. |
| No detection in AC mode. | Wires are not live, or too deep. | Ensure power is on to the circuit. Scan slowly and thoroughly. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | RB-0003 (MIE-RB-0003) |
| Brand | ÌṢÒTÌ |
| Metal Detection Depth | Titi di 30 mm |
| Ijinle Wiwa Igi | Up to 18 mm (for 30x30 mm profiles) |
| AC Cable Detection | 90-250V |
| Iwọn Ifihan | 51 x 25 mm |
| Atọka Batiri Kekere | Bẹẹni |
| Orisun agbara | Agbara Batiri |
| Ọja Mefa | 15.5 x 5.4 x 2.7 cm |
| Iwọn Nkan | 157 giramu |
| International Idaabobo Rating | IP66 |
9. Atilẹyin ọja ati Support
REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webojula.
For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webojula.
