Ọrọ Iṣaaju
This manual provides comprehensive instructions for the setup, operation, and maintenance of your TASCO Low Glow 12 Mega Pixels Trail Camera. Designed for reliability and ease of use, this camera captures high-quality images and 720P video, making it an excellent tool for wildlife monitoring, hunting, and security surveillance.
olusin 1: Iwaju view of the TASCO Low Glow 12 MP Trail Camera, showcasing its compact design and IR flash array.
Awọn ẹya pataki:
- Crystal Clear 12 Mega Pixel Images: Capture high-resolution still photographs.
- 720P Video Recording: Record clear video footage.
- PIR Motion Sensor with 70FT Range: Detects movement up to 70 feet away for automatic capture.
- 70FT Low Glow IR Flash: Provides illumination for night captures without startling wildlife, with a range of up to 70 feet.
- Igbesi aye batiri gigun: Operates for up to 12 months on 8 AA batteries (not included).
- Apẹrẹ ti o tọ: IP67 International Protection Rating ensures resistance to dust and water.
Ohun ti o wa ninu Apoti
Upon unpacking your TASCO Trail Camera, please verify that all components are present and in good condition:
- TASCO Low Glow 12 MP Trail Camera (OD Green)
- Iṣagbesori Okun
Figure 2: Contents of the box, including the trail camera and the mounting strap.
Ṣeto
1. Fifi sori batiri
- Ṣii latch ile kamẹra.
- Wa yara batiri naa.
- Insert 8 new AA alkaline or lithium batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Pa yara batiri naa ni aabo.
2. SD kaadi ifibọ
- Pẹlu ṣiṣi ile kamẹra, wa iho kaadi SD.
- Insert a formatted SD card (up to 32GB, Class 10 recommended) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- Lati yọ kuro, Titari kaadi naa ni die-die titi yoo fi jade.
3. Iṣagbesori Kamẹra
- Yan ipo ti o dara fun kamẹra rẹ, gẹgẹbi igi tabi ifiweranṣẹ, ni idaniloju titọ view ti agbegbe ti o fẹ.
- Fi okùn ìsopọ̀ tí a pèsè sí inú àwọn ihò tí ó wà ní ẹ̀yìn kámẹ́rà náà.
- Securely fasten the strap around the mounting surface. Adjust the camera angle as needed.
Operating Your Trail Camera
1. Agbara lori / Paa
- To power on, slide the power switch to the 'ON' position. The indicator light will briefly illuminate.
- Lati pa agbara, rọra yipada agbara si ipo 'PA'.
2. Aṣayan Ipo
The camera typically features different operating modes, such as Photo, Video, or Photo+Video. Refer to the on-screen menu (if available) or physical switch to select your desired capture mode.
3. Sensọ išipopada PIR
The Passive Infrared (PIR) sensor detects heat and motion within its 70-foot range. When motion is detected, the camera will trigger and capture an image or video according to your selected settings.
4. Low Glow IR Flash
For night captures, the camera utilizes a 70-foot Low Glow IR flash. This technology emits infrared light that is nearly invisible to the human eye and most animals, allowing for discreet night photography and videography.
Olusin 3: Example ti aworan ọsan ti o ya nipasẹ kamẹra itọpa, ti o nfihan agbọnrin kan ni ibugbe adayeba rẹ.
Olusin 4: Example of a nighttime image captured by the trail camera, demonstrating the effectiveness of the Low Glow IR flash.
5. Viewing Yaworan Media
Si view images and videos, remove the SD card from the camera and insert it into a compatible device such as a computer or an SD card reader. Navigate to the DCIM folder on the SD card to access your media files.
Itoju
1. Ninu
- Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Nu ara kamẹra mọ pẹlu ipolowoamp asọ bi ti nilo.
2. Itọju batiri
- Replace all batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
- Yọ awọn batiri kuro ti a ko ba lo kamẹra fun igba pipẹ lati dena jijo.
3. Ibi ipamọ
- Tọju kamẹra naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
Laasigbotitusita
| Oro | Owun to le Fa | Ojutu |
|---|---|---|
| Kamẹra ko ṣiṣẹ | Incorrect battery installation; Dead batteries; Corrupted SD card. | Check battery polarity; Replace all batteries; Remove SD card and try powering on. |
| Aworan ti ko dara / didara fidio | Dirty lens/sensor; Low light conditions; Object too far/close. | Clean lens and sensor; Ensure adequate lighting or proper IR flash usage; Adjust camera placement. |
| Video not playing on mobile devices (e.g., Apple products) | Video format incompatibility (AVI); Device limitations. | Use a computer to view videos; Convert video files to a compatible format; Use a dedicated SD card reader for your mobile device. |
| Aye batiri kukuru | Frequent triggers; Cold weather; Low-quality batteries. | Reduce trigger sensitivity; Use lithium batteries in cold weather; Use high-quality alkaline or lithium batteries. |
Imọ ni pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Ipinnu Iduro ti o munadoko | 12 MP |
| Ipinnu Yaworan fidio | 720p |
| Fidio Yaworan kika | AVI |
| Ibiti sensọ išipopada PIR | 70 FT |
| IR Flash Range | 70 FT (Low Glow) |
| Orisun agbara | Awọn batiri 8 x AA (kii ṣe pẹlu) |
| Asopọmọra Technology | Ailokun (Wi-Fi) |
| International Idaabobo Rating | IP67 |
| Awọn iwọn Ọja (L x W x H) | 6 x 4 x 3 inches |
| Iwọn Nkan | 12 iwon |
| Àwọ̀ | OD Alawọ ewe |
| Awọn irinše to wa | Okùn |
Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your product packaging or visit the official Vikeri webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
For additional assistance, you may also contact the manufacturer, Tasco, directly through their official support channels.
