HANMATEK HO102 Oscilloscope oni-nọmba oni-nọmba meji-ninu-1 ati iwe afọwọkọ olumulo Multimeter

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the safe and effective operation of your HANMATEK HO102 2-in-1 Handheld Digital Oscilloscope and Multimeter. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury. Keep this manual for future reference.

Alaye Aabo

Always observe the following safety precautions when operating the HANMATEK HO102:

• Do not operate the device if it appears damaged or if the casing ṣii.
• Ensure proper probe connections before applying power to the circuit under test.
• Maṣe kọja iwọn titẹ sii ti o pọjutage ratings for both oscilloscope (CAT III 600V) and multimeter (750 VAC / 1000 VDC) inputs.
• Use only the provided accessories or approved replacements.
• Yago fun sisẹ ni tutu tabi damp awọn ipo.
• Refer to local safety regulations and standards for electrical testing.

Ọja Pariview

The HANMATEK HO102 is a compact, portable instrument combining the functions of a digital oscilloscope and a true RMS multimeter. It features a 3.5-inch TFT display and a user-friendly interface.

Figure 1: HANMATEK HO102 device and standard accessories.

Ifilelẹ ẹrọ ati Awọn idari

Àwòrán 2: Pẹpẹ iwájú àti ẹ̀gbẹ́ view with key components labeled.

• Agbegbe Ifihan: Iboju TFT 3.5-inch fun ifihan igbi ati wiwọn.
• Awọn bọtini F1-F4: Àwọn kọ́kọ́rọ́ iṣẹ́ púpọ̀, tí ó ní ìmọ̀lára lórí àyíká.
• Bọtini ipo: Switches between Oscilloscope and Multimeter modes.
• Kọ́kọ́rọ́ CH1/2: Bọtini iyipada ikanni fun oscilloscope.
• Kọ́kọ́rọ́ HDR: Horizontal range key.
• Bọtini eto: Enters system settings menu.
• Fipamọ́ Kọ́kọ́rọ́: Saves current settings or waveforms.
• Bọtini Yipada Agbara: Yipada ẹrọ si tan/pa.
• Trigger/Δ Key: Bọtini akojọ aṣayan okunfa (oscilloscope) tabi bọtini iye ojulumo (multimeter).
• Navigation Keys (Up, Down, Left, Right, Enter): Fún ìṣàtúnṣe àkójọ àkójọ àti àtúnṣe paramita.
• Measure/Range Key: Bọtini akojọ aṣayan wiwọn (oscilloscope) tabi bọtini ibiti o (ọpọlọpọ).
• Bọtini Aifọwọyi: Bọtini eto aifọwọyi (oscilloscope) tabi bọtini ibiti o wa ni aifọwọyi (multimeter).
• Kọ́kọ́rọ́ Ìṣiṣẹ́/Dádúró: Starts/stops waveform acquisition (oscilloscope) or hold key (multimeter).
• Multimeter Input Ports (A, mA, COM, QVC+): For multimeter lead connections.
• CH1 and CH2 Input Connectors: Àwọn asopọ̀ BNC fún àwọn ìwádìí oscilloscope.
• Charging Port / USB Communication Port: USB Type-C port for charging and PC connection.
• Biraketi: Kickstand for desktop use.

Ṣeto

Gbigba agbara ni ibẹrẹ

Before first use, fully charge the device using the provided USB Type-C cable and power adapter. The charging port is located on the side of the unit.

Iwadi Asopọ

Connect the oscilloscope probes to the CH1 and CH2 BNC input connectors. For multimeter functions, connect the multimeter leads to the appropriate input ports (A, mA, COM, QVC+).

Titan / Paa

Tẹ mọlẹ Agbara key to turn the device on or off.

Awọn ilana Iṣiṣẹ

Awọn ọna Yipada

Tẹ awọn Ipo key to toggle between Oscilloscope mode and Multimeter mode.

Ipo Oscilloscope

In Oscilloscope mode, the device displays real-time waveforms. Key features include:

• Bandiwidi: Up to 50 MHz.
• SampOṣuwọn: 125 MSa/s (real-time).
• Awọn ikanni: Dual channel operation.
• Waveform Refresh Rate: Up to 10,000 Wfms/s.
• Record Length: Up to 8K.

Basic Waveform Display

Connect the oscilloscope probe to the circuit under test. Press the Aifọwọyi key for automatic waveform scaling and triggering. This function provides a quick and convenient way to display stable waveforms.

Olusin 3: Example of waveform display in Oscilloscope mode.

Siṣàtúnṣe Eto

Use the navigation keys to adjust vertical (voltage) and horizontal (time) scales. The CH1/2 key switches between channels. The HDR key adjusts the horizontal range.

Nfa

Tẹ awọn Ìlànà mẹ́ta/Δ key to access trigger settings. Adjust trigger level, mode, and source to stabilize the waveform display.

Awọn wiwọn

Tẹ awọn Measure/Range key to access automatic measurement functions. The device supports four automatic measurement functions and cursor measurements for precise analysis.

XY Function

The XY function allows for displaying Lissajous figures, useful for phase difference measurements between two signals.

Multimeter Ipo

In Multimeter mode, the device functions as a 4 1/2 digit true RMS multimeter with 20,000 counts. It supports various electrical measurements:

• Voltage (AC/DC)
• Lọ́wọ́lọ́wọ́ (AC/DC)
• Atako
• Idanwo Diode
• Igbeyewo Ilọsiwaju
• Agbara

Ṣiṣe Awọn wiwọn

Connect the multimeter leads to the appropriate input ports based on the desired measurement. Press the Aifọwọyi key for automatic ranging, or use the Measure/Range key to manually select the range.

Olusin 4: Example ti voltage measurement in Multimeter mode.

Read Hold and Relative Measurement

Lo awọn Ṣiṣe / Duro key to hold the current reading. The Ìlànà mẹ́ta/Δ key activates the relative measurement function, displaying the difference from a stored reference value.

Awọn iṣẹ iranti

The HO102 allows saving and recalling various data types:

• 4 sets of parameters.
• 4 reference waveforms.
• 4 images (screenshots).
• 4 sets of waveforms in CSV format.

Tẹ awọn Fipamọ key to store data. Saved reference waveforms can be displayed alongside live measurements for comparison.

Figure 5: Comparing a live waveform with a stored reference waveform.

PC Connection and Data Transfer

Connect the HO102 to a computer using the USB Type-C cable. The device will be recognized as a USB flash drive, allowing you to access and transfer stored images and CSV waveform data for further analysis.

Figure 6: HANMATEK HO102 connected to a PC for data transfer and analysis.

Software for this product can be downloaded from: https://bit.ly/3kQe4wQ

Auto-Calibration Function

The device includes an auto-calibration function to maintain measurement accuracy. Refer to the system settings menu for initiating this process.

Itoju

Ninu

Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.

Itọju Batiri

The built-in Lithium-ion battery provides approximately 6 hours of continuous operation on a full charge. For optimal battery life, avoid fully discharging the battery frequently and store the device in a cool, dry place when not in use for extended periods.

Ibi ipamọ

Store the device and its accessories in the provided carrying bag to protect them from dust and physical damage.

Laasigbotitusita

Awọn pato

Package Awọn akoonu

The HANMATEK HO102 package includes:

• 1 x HANMATEK HO102 2-in-1 Digital Oscilloscope and Multimeter
• 1 x Apo gbigbe
• Àwọn Ìwádìí Oscilloscope 2 x
• 1 x Agbara Adapter
• 1 x Okun USB Iru-C
• 1 x Awọn itọsọna Igbeyewo Multimeter
• 1 x Itọsọna olumulo
• 1 x Calibration Pen
• 1 x CD (containing software)

Figure 7: All items included in the HANMATEK HO102 product package.

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official HANMATEK webaaye tabi kan si olupin agbegbe rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.