Ọrọ Iṣaaju
This manual provides essential information for the proper setup, operation, and maintenance of your Dual CS 429 Fully Automatic Turntable. Please read these instructions carefully before using the device to ensure optimal performance and longevity.
The Dual CS 429 is engineered for high-fidelity audio playback with user-friendly automatic functions. Its robust construction, including a solid MDF plinth and a die-cast aluminum platter, is designed to minimize vibrations and enhance sound quality. The turntable features a straight, statically balanced tonearm for precise tracking.
Ṣeto
1. Unpacking ati Placement
- Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti. Ṣe idaduro apoti fun irinna ọjọ iwaju tabi ibi ipamọ.
- Gbe awọn turntable lori kan idurosinsin, ipele dada kuro lati orun taara, ooru awọn orisun, ati nmu gbigbọn.
- Rii daju pe fentilesonu to peye ni ayika ẹyọ naa.
2. Platter and Mat Installation
- Gently place the die-cast aluminum platter onto the turntable spindle.
- Position the heavy rubber mat on top of the platter.
Aworan: A sunmọ-soke view of the Dual CS 429 turntable's internal platter mechanism, showing the spindle and belt drive components before the platter is placed.
3. Tonearm Balance and Anti-Skating
- Follow the detailed instructions in the included quick start guide for precise tonearm balancing and anti-skating adjustment. Correct adjustment is crucial for optimal sound quality and to prevent record wear.
4. Audio and Power Connections
- Connect the RCA audio cables from the turntable's 'AUDIO OUT' to your amplifier's 'PHONO' input. If your amplifier does not have a dedicated 'PHONO' input, use the turntable's built-in pre-amplifier by setting the 'PHONO/LINE' switch to 'LINE' and connecting to a standard 'LINE IN' input.
- Connect the ground wire (GND) to your amplifier's ground terminal to minimize hum.
- Plug the power adapter into the 'DC IN 12V' port on the rear of the turntable, then into a wall outlet.
Image: The rear panel of the Dual CS 429 turntable, showing the RCA audio outputs, ground terminal, PHONO/LINE switch, and DC 12V power input.
Awọn ilana Iṣiṣẹ
1. Agbara lori / Paa
- Locate the power button on the rear panel of the turntable. Press it to turn the unit on or off.
2. Selecting Playback Speed
- Use the speed selector knob on the front panel to choose between 33, 45, or 78 RPM, matching the speed of your record.
3. Automatic Playback
- Gbe igbasilẹ kan sori apẹrẹ.
- Press the 'START' button. The tonearm will automatically move to the beginning of the record and lower the stylus.
- At the end of the record, the tonearm will automatically lift, return to its rest, and the platter will stop spinning.
4. Manual Playback (Optional)
- To manually cue a record, gently lift the tonearm using the cueing lever. Position the tonearm over the desired track and lower the cueing lever to drop the stylus.
- To stop playback manually, lift the tonearm with the cueing lever and return it to its rest. Press the 'STOP' button to halt the platter.
Image: A top-down perspective of the Dual CS 429 turntable with a vinyl record spinning on the platter and the tonearm tracking the grooves.
Itoju
1. Ninu
- Ideri Ekuru: Regularly wipe the dust cover with a soft, dry, anti-static cloth. Avoid abrasive cleaners.
- Stylus: Use a soft brush designed for stylus cleaning, brushing gently from back to front. Clean the stylus before each play session.
- Awọn akosile: Keep your records clean using a record brush or cleaning solution to prevent dust and debris from damaging the stylus and affecting sound quality.
2. Stylus and Cartridge Replacement
- The stylus (needle) is a consumable part and will wear out over time. Replace it according to the manufacturer's recommendations or if you notice a degradation in sound quality.
- Refer to the cartridge manufacturer's instructions for specific replacement procedures.
Laasigbotitusita
- Ko si Ohun: Check all audio connections to your amplifier. Ensure the 'PHONO/LINE' switch is set correctly. Verify your amplifier input is selected and volume is up.
- Skipping or Distortion: Ensure the tonearm is properly balanced and the anti-skating is correctly set. Clean the record and stylus. Check for any physical damage to the record or stylus.
- Incorrect Speed: Verify the speed selector knob is set to the correct RPM (33, 45, or 78) for the record being played.
- Ariwo Aruwo: Ensure the ground wire is securely connected between the turntable and your amplifier. Check for proper power connections and ensure no other electronic devices are causing interference.
Awọn pato
- Awoṣe: CS 429
- Brand: MEJI
- Awọn iwọn ọja: 17.32 x 14.57 x 5.91 inches
- Ìwọ̀n Nkan: 17.31 iwon (7.87 kilo)
- Platter Material: Kú-Cast Aluminiomu
- Plinth Material: Solid MDF (Engineered Wood)
- Ohun orin: Straight, Statically Balanced, Solid Aluminum with Ball-Bearings
- Isẹ: Fully Automatic Belt Drive
- Iyara Yiyi to pọju: 78 RPM
- Awọn eroja to wa: Ideri eruku
- Awọn ẹrọ ibaramu: Agbọrọsọ, Agbekọri
- Àwọ̀: Dudu
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official DUAL Electronics webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
