1. Ifihan
Thank you for choosing the Mission LX-4 MKII Tower Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your new speakers. Please read it thoroughly before use to ensure optimal performance and longevity of your product.
The Mission LX-4 MKII series represents over 40 years of British Hi-Fi heritage, offering enhanced clarity in the midrange, refined treble detail, and improved micro-dynamics for a thrilling musical experience. These speakers feature Mission's classic Inverted Geometry Drive (IDG) driver format, positioning the high frequency unit below the bass/midrange driver for improved time alignment and transient performance.
olusin 1: Iwaju view of the Mission LX-4 MKII Tower Speaker, showcasing its sleek design and driver configuration.
2. Eto
2.1 Ṣiṣii silẹ
Carefully remove the speakers from their packaging. Retain all packaging materials for future transport or storage. Inspect the speakers for any signs of damage. If damage is found, contact your dealer immediately.
2.2 Ibi
Optimal speaker placement is crucial for sound quality. Position the LX-4 MKII speakers on a stable, level surface. For stereo listening, place the speakers equidistant from your primary listening position, forming an equilateral triangle. Ensure there is adequate space around the speakers for proper air circulation and to minimize reflections from nearby walls or furniture.
Olusin 2: Example of Mission LX-4 MKII Tower Speakers integrated into a modern living room setup, demonstrating ideal placement for optimal audio experience.
2.3 Awọn isopọ
The LX-4 MKII speakers are designed for connection to an amplifier. Use high-quality speaker cables to connect the speaker terminals to the corresponding output terminals on your amplifier. Ensure correct polarity: positive (+) on the speaker to positive (+) on the amplifier, and negative (-) on the speaker to negative (-) on the amplifier. Incorrect polarity can result in poor sound quality.
olusin 3: Ẹyìn view of the Mission LX-4 MKII Tower Speaker, highlighting the robust speaker terminals for secure amplifier awọn isopọ.
3. Awọn ilana Iṣiṣẹ
3.1 Sisisẹsẹhin akọkọ
Once connected, ensure your amplifier's volume is set to a low level before powering on. Gradually increase the volume to a comfortable listening level. Allow a 'break-in' period of several hours of playback for the drivers to settle and achieve their optimal performance.
3.2 Amplifier Ibamu
The Mission LX-4 MKII speakers are designed to work with a wide range of amplifiers. Refer to the specifications section for recommended amplifier power. Avoid overdriving the speakers with excessive volume, which can lead to distortion and potential damage.
4. Itọju
4.1 Ninu
To clean the speaker cabinets, use a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish. For the grilles, a soft brush or vacuum cleaner with a brush attachment can be used to remove dust.
4.2 Itọju Gbogbogbo
Keep the speakers away from direct sunlight, heat sources, and excessive moisture. Do not place heavy objects on top of the speakers. Ensure children and pets do not tamper with the speaker drivers.
5. Laasigbotitusita
If you experience issues with your Mission LX-4 MKII speakers, consult the following common troubleshooting steps:
- Ko si Ohun: Check all cable connections between the amplifier and speakers. Ensure the amplifier is powered on and the correct input is selected. Verify that the volume is not muted or set too low.
- Ohun Yiyi: Din awọn amplifier volume. Check speaker cable connections for loose strands or short circuits. Ensure the amplifier is not clipping (overdriving).
- Ohun ti ko ni iwọntunwọnsi: Check speaker placement and ensure both speakers are connected with correct polarity. Verify ampawọn eto iwọntunwọnsi lifier.
- Ìdáhùn Báàsì Tí Kò Dáa: Ensure speakers are not placed too far from walls or in an overly large room without proper acoustic treatment. Check for loose connections.
If problems persist after attempting these steps, contact your authorized Mission dealer or customer support for further assistance.
6. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Orukọ awoṣe | LX-4 MKII |
| Agbọrọsọ Iru | Ile-iṣọ |
| Kakiri Ohun ikanni iṣeto ni | 2.0 |
| Iwọn Nkan | 40.3 iwon |
| Se mabomire | ERO |
| Ọna Iṣakoso | Remote (via connected ampalafin) |
| Iwọn Agbọrọsọ | 200 Millimeters (Woofer) |
| Orisun agbara | Corded Electric (via connected ampalafin) |
| UPC | 840117503366 |
| Olupese | Mission Hifi |
| Ọja Mefa | 15.35 x 12.6 x 40.55 inches |
| Nọmba awoṣe ohun kan | LX4MKIIBK |
| Agbọrọsọ Agbara Ijade ti o pọju | 120 Wattis |
| Asopọmọra Technology | Auxiliary (via speaker wire) |
| Ipo Ijade Ohun | Sitẹrio |
| Iṣagbesori Iru | Iduro Floor |
7. Atilẹyin ọja ati Support
Mission products are manufactured to the highest standards and are designed for reliable performance. For warranty information, please refer to the warranty card included with your product or visit the official Mission webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Mission dealer or the manufacturer's customer support. Contact information can typically be found on the Mission webaaye tabi ninu iwe ọja rẹ.
Pataki: Do not attempt to service the speakers yourself. Refer all servicing to qualified service personnel.
