1. Ifihan
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold flat-panel TVs and monitors ranging from 23 to 55 inches, with VESA compatibility up to 400x400mm.
Aworan 1.1: Pariview of the Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount.
2. Alaye Aabo
IKILO: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. Mount Plus is not liable for damage or injury caused by incorrect assembly or use.
- Rii daju pe ipele iṣagbesori le ṣe atilẹyin lailewu iwuwo apapọ ti oke ati ifihan.
- Maṣe kọja agbara iwuwo ti o pọju ti 44 lbs (20 kg).
- Ọja yii jẹ ipinnu fun lilo inu ile nikan.
- Use only the provided hardware. If any parts are missing or damaged, contact Mount Plus for replacement.
- Always use a qualified professional for installation if you are unsure about the process.
- Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
3. Package Awọn akoonu
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list below:
- Aja Awo Apejọ
- Iṣagbesori Arm
- VESA TV Brackets (x2)
- Hardware Kit (screws, washers, spacers, anchors)
- Ilana itọnisọna
4. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | CM344 |
| Ibamu Iwon Iboju | 23"-55" |
| VESA ibamu | 100x100mm, 200x100mm, 200x200mm, 400x400mm |
| Agbara iwuwo | 44 lbs (20 kg) |
| Titẹ Igun | -80° to 0° (Fold-up mechanism) |
| Igun Swivel | ±45° |
| Atunṣe Giga | Min 20.5" to Max 24.2" (approx. 4 inches) |
| Ohun elo | Alloy Irin, Aluminiomu |
| Àwọ̀ | Dudu |
Image 4.1: Detailed dimensions of the Mount Plus CM344.
5. Awọn ilana fifi sori ẹrọ
Before starting, ensure you have the necessary tools: drill, stud finder, level, screwdriver, and a pencil. It is recommended to have a second person assist with installation.
5.1. Pinnu Ibi ti a ti n so o pọ
Locate a suitable ceiling joist or solid concrete area. Use a stud finder to confirm the location of wooden studs. For concrete ceilings, ensure the concrete is solid and thick enough for anchors.
5.2. Install Ceiling Plate
- Position the ceiling plate (part of the main assembly) against the ceiling at your desired location.
- Mark the drill holes through the plate onto the ceiling using a pencil.
- Drill pilot holes. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
- Secure the ceiling plate using the provided lag bolts and washers. Ensure it is firmly attached and level.
Image 5.1: Close-up of the ceiling plate with its integrated swivel mechanism.
5.3. Attach VESA Brackets to TV/Monitor
- Lay your TV or monitor face down on a soft, clean surface to prevent scratches.
- Ṣe àwárí àwọn ihò ìsopọ̀ VESA tí ó wà lẹ́yìn ìfihàn rẹ.
- Yan awọn skru, awọn fifọ aṣọ, ati awọn aaye ti o yẹ lati inu ohun elo ohun elo ti o baamu ilana VESA ti TV rẹ.
- Attach the two VESA TV brackets to the back of your display. Ensure they are securely fastened but do not overtighten.
5.4. Mount TV/Monitor to Arm Assembly
- With assistance, carefully lift the TV/monitor with the attached VESA brackets.
- Hook the VESA brackets onto the mounting arm of the ceiling assembly. Ensure both brackets are properly seated.
- Secure the TV/monitor to the arm assembly using the provided safety screws or locking mechanisms to prevent accidental dislodgement.
Image 5.2: Illustration of the mount assembly and TV attachment.
6. Awọn ilana Iṣiṣẹ
6.1. Folding Up and Down
The mount allows the display to fold up against the ceiling for storage or to save space, and fold down for viewing.
- To Fold Up: Gently push the bottom of the display upwards until it clicks into the locked position against the ceiling plate.
- To Fold Down: Pull the release mechanism (often a small lever or tab) to unlock the display, then carefully lower it to the desired viewigun igun.
Image 6.1: Diagram illustrating the push-to-lock and pull-to-unlock mechanism.
Aworan 6.2: Apa view demonstrating the tilt range of the mount.
6.2. Àtúnṣe Yíyípo
The mount features a ±45° swivel function to optimize viewing awọn igun.
- Gently rotate the display left or right to achieve your preferred viewipo ipo.
Aworan 6.3: Iwaju ati ẹgbẹ view illustrating the swivel capability.
6.3. Giga tolesese
The vertical rail allows for approximately 4 inches of height adjustment.
- Loosen the adjustment screws on the vertical rail.
- Slide the display up or down to the desired height.
- Tighten the adjustment screws firmly to secure the height.
Aworan 6.4: Apa view demonstrating the adjustable vertical rail for height customization.
7. Itọju
Regular maintenance ensures the longevity and safe operation of your mount.
- Máa ṣàyẹ̀wò gbogbo àwọn skru àti bọ́ọ̀lù láti rí i dájú pé wọ́n wà ní ìdúró. Tún di mọ́ ọn tí ó bá pọndandan.
- Nu oke naa pẹlu asọ ti o gbẹ. Yago fun abrasive ose tabi epo.
- Inspect moving parts for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
8. Laasigbotitusita
If you encounter issues with your Mount Plus CM344, refer to the following common problems and solutions:
- Iṣoro: TV does not fold up or down smoothly.
Ojutu: Check for any obstructions. Ensure the locking mechanism is not jammed. Apply a small amount of silicone-based lubricant to moving parts if friction is excessive. - Iṣoro: TV appears unstable or sags.
Ojutu: Verify that all mounting bolts to the ceiling and VESA screws to the TV are securely tightened. Ensure the TV's weight does not exceed the 44 lbs capacity. - Iṣoro: Iṣoro lati ṣatunṣe iga tabi swivel.
Ojutu: Loosen the relevant adjustment screws slightly before attempting to reposition. Ensure no cables are interfering with movement.
9. Atilẹyin ọja ati Support
The Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount comes with a 2-ODUN ATILẸYIN ỌJA lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati awọn abawọn ohun elo labẹ lilo deede.
For warranty claims, technical support, or replacement parts, please contact Mount Plus customer service. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official Mount Plus webaaye tabi kan si awọn ikanni atilẹyin wọn.
