Ọrọ Iṣaaju
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Awọn Itọsọna Aabo
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Ma ṣe fi ẹrọ naa han si ojo tabi ọrinrin lati yago fun ina tabi mọnamọna.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Ma ṣe gbiyanju lati ṣe iṣẹ fun ẹyọkan funrararẹ. Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye.
- Jeki kuro ni arọwọto awọn ọmọde.
Package Awọn akoonu
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Awọn okun agbara
- Awọn kebulu RCA
- Àwọn òṣuwọn
- Slipmats
- Itọsọna olumulo
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Ṣeto
1. Unpacking ati Placement
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Aworan: Angled view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Sísopọ̀ àwọn okùn ohùn
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Asopọ agbara
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Awọn ilana Iṣiṣẹ
1. Agbara Tan ati Paa
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Aworan: Oke view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Ti ndun a Gba
- Gbe igbasilẹ kan sori apẹrẹ.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Tẹ awọn Bẹrẹ/Duro bọtini lati bẹrẹ platter yiyi.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The Yipada button allows for reverse playback of the record.
Itoju
1. Nu Turntable naa
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Ìtọ́jú Stylus
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Okun agbara ko sopọ; Agbara iṣan ti ko tọ | Ṣàyẹ̀wò ìsopọ̀ okùn agbára; Gbìyànjú ọ̀nà ìjáde mìíràn |
| Ko si ohun | RCA cables not connected; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Ariwo humming | Ground wire not connected; Interference | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Incorrect playback speed | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Awọn pato
- Brand: Yipada
- Awoṣe: RP-7000 MK2
- Imọ-ẹrọ Asopọmọra: Ti firanṣẹ
- Awọn ẹya pataki: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- Ohun elo: Ṣiṣu
- Ìwọ̀n Nkan: 4.5 Kilograms (per turntable)
- Àwọ̀: Deep black or classic silver metallic
- Awọn ẹrọ ibaramu: Agbọrọsọ, Agbekọri
Atilẹyin ọja ati Support
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop webaaye tabi kan si olupin agbegbe rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Fun iranlọwọ siwaju sii, ṣabẹwo si Reloop Store on Amazon.
