Ọrọ Iṣaaju
Thank you for choosing the morpilot Ice Maker. This appliance is designed to provide you with fresh ice cubes quickly and conveniently. Please read this manual thoroughly before operating your new ice maker to ensure safe and efficient use.
The morpilot Ice Maker is capable of producing 9 ice cubes in as little as 8 minutes, with a daily production capacity of up to 26 pounds (12 kg) of ice. It features a 1.5-liter water capacity and comes with a BPA-free plastic ice scoop and a removable ice basket. Its compact design makes it suitable for various settings, including homes, offices, and small businesses.
Image: The morpilot Ice Maker, black with a clear lid, shown alongside a white ice basket filled with ice cubes and a bottle. This illustrates the product and its primary output.
Ṣeto
- Ṣíṣe Íìsì náà sílẹ̀: Carefully remove the ice maker and all accessories from the packaging. Ensure all components, including the ice scoop and ice basket, are present.
- Ibi: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
- Ìfọ̀mọ́ àkọ́kọ́: Ṣaaju lilo akọkọ, nu inu ti oluṣe yinyin. Tọkasi apakan "Itọju" fun alaye awọn ilana mimọ.
- Fi omi kun: Ṣí ìbòrí náà kí o sì fi omi mímọ́ tónítóní kún ibi ìtọ́jú omi náà títí dé ìlà ìkún omi tó ga jùlọ. Má ṣe kún ju bó ṣe yẹ lọ.
- So agbara: Pulọọgi okun agbara sinu iṣan itanna ti ilẹ.
Image: A detailed diagram of the morpilot Ice Maker, pointing out key features such as the simple press buttons, transparent window, ice scoop, large air vent, drain plug, and removable ice basket. This visual aid helps users identify components during setup.
Awọn ilana Iṣiṣẹ
- Bẹrẹ iṣelọpọ Ice: After adding water and plugging in, press the "ON/OFF" button on the control panel. The "ICE MAKING" indicator light will illuminate.
- Ice Cube Formation: The ice maker will begin the ice-making cycle. You can expect the first batch of 9 ice cubes in approximately 8 minutes.
- Monitoring Ice and Water:
- If the "ADD WATER" indicator light illuminates, it means the water reservoir is low. Add more water to continue ice production.
- If the "ICE FULL" indicator light illuminates, the ice basket is full. The machine will automatically stop making ice. Remove ice from the basket to resume production.
- Ṣiṣawari Infurarẹẹdi: The machine uses infrared detection to sense when the ice basket is full, automatically pausing operation for safety and efficiency.
- Gbigba Yinyin: Use the provided ice scoop to remove ice cubes from the basket. For best results, transfer freshly made ice to a freezer for storage, as the ice maker is not a freezer and ice may melt over time.
- Duro isẹ: To stop ice production at any time, press the "ON/OFF" button again.
Aworan: A sunmọ-soke view of the ice maker's internal mechanism, showing 9 ice bullet-shaped cubes forming. This highlights the rapid ice production capability of the machine.
Itoju
Regular cleaning and maintenance will ensure the longevity and optimal performance of your morpilot Ice Maker.
Iṣẹ Isọmọ Aifọwọyi:
- Rii daju pe ibi ipamọ omi ti kun pẹlu omi mimọ.
- Press and hold the "CLEAN" button for a few seconds. The machine will initiate an automatic cleaning cycle.
- Once the cleaning cycle is complete, the water from the internal reservoir will drain through the bottom drain of the machine.
Afọmọ Afowoyi:
- Sisan omi: When the machine is not in use, completely drain any remaining water from the reservoir using the drain plug located at the bottom.
- Pa inu inu rẹ nu: Lo asọ asọ dampened with mild detergent and water to wipe down the interior surfaces, including the ice basket and water reservoir. Rinse thoroughly with clean water.
- Gbẹ ni kikun: Ensure all internal parts are completely dry before storing the machine or using it again. This prevents mold and mildew growth.
- Ode Ninu: Mu ese ita kuro pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
Image: An illustrative diagram demonstrating the internal water circulation during the one-touch self-cleaning function. This visual helps users understand how the automatic cleaning process works.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹlẹda yinyin ko tan. | Ko edidi ni; agbara otage; aṣiṣe iṣan. | Rí i dájú pé okùn agbára náà wà ní ìpamọ́ dáadáa. Ṣàyẹ̀wò ẹ̀rọ ìdènà. Gbìyànjú ọ̀nà ìdènà mìíràn. |
| Atọka "ADD OMI" wa ni titan. | Ibi ipamọ omi ti ṣofo tabi kekere. | Add clean, potable water to the reservoir up to the MAX fill line. |
| Atọka "yinyin FULL" wa ni titan. | Agbọn yinyin ti kun. | Remove ice from the basket. The machine will resume ice production automatically. |
| Àwọn yìnyín kékeré jù tàbí wọn kò ṣẹ̀dá dáadáa. | Water temperature too high; ambient temperature too high; insufficient water. | Use colder water. Ensure the machine is in a cool, well-ventilated area. Check water level. |
| Ẹ̀rọ náà máa ń pariwo nígbà tí ó bá ń ṣiṣẹ́. | Normal operation sounds (compressor, water pump); machine not level. | Some noise is normal. Ensure the machine is on a stable, level surface. |
| Ice has an unusual taste or smell. | Stagnant water; machine needs cleaning. | Perform a thorough cleaning cycle. Use fresh, clean water. |
Awọn pato
- Orukọ awoṣe: Morpilot Ice Maker
- Awọn iwọn (L x W x H): 28.3P x 22.4l x 30.8H centimeters (tó tó 11.14 x 8.82 x 12.13 inches)
- Ìwúwo: Kg 9.07 (isunmọ 20 lbs)
- Agbara: 120 Wattis
- Voltage: 120 Volts
- Agbara Omi: 1.5 liters
- Ice Production (per cycle): 9 onigun
- Ice Production (daily): Titi di 26 lbs (12 kg)
- Firiji: R600a
- Ohun elo: Ṣiṣu
- UPC: 810074384063
Image: The morpilot Portable Ice Maker displayed on a kitchen counter, with its key dimensions (height, width, depth) clearly labeled. This provides a visual reference for the product's size.
Atilẹyin
If you encounter any problems during the use of your morpilot Ice Maker, or have any questions not covered in this manual, please do not hesitate to contact morpilot customer support for assistance.
For the most up-to-date contact information, please visit the official morpilot webaaye tabi tọka si iwe rira rẹ.
