AEG Hygienic 8000 Cordless Vacuum Cleaner AP81B25WET Instruction Manual

1. Ifihan ati Alaye Aabo

This manual provides essential instructions for the safe and efficient use of your AEG Hygienic 8000 Cordless Vacuum Cleaner. Please read all instructions carefully before operating the appliance and retain this manual for future reference.

1.1 Awọn ilana Aabo pataki

• Always ensure the vacuum cleaner is switched off and unplugged from the charger before performing any maintenance or cleaning.
• Do not use the appliance to pick up water or other liquids, flammable substances, hot ashes, or sharp objects.
• Jeki irun, aṣọ alaimuṣinṣin, awọn ika ọwọ, ati gbogbo awọn ẹya ara kuro lati awọn ṣiṣi ati awọn ẹya gbigbe.
• Do not operate the vacuum cleaner if it is damaged or malfunctioning. Contact authorized service personnel for repairs.
• Use only the charging adapter and battery pack supplied with the appliance.
• Ohun elo yii jẹ ipinnu fun lilo ile nikan.

2. Ọja Ipariview

The AEG Hygienic 8000 is a versatile cordless vacuum cleaner designed for both dry vacuuming and wet cleaning with its integrated mop nozzle. It features a powerful motor and an advanced filtration system.

This image displays the AEG Hygienic 8000 cordless vacuum cleaner in its upright configuration, alongside its various attachments: the UltimatePower mop nozzle, UltimatePower multi-floor nozzle, crevice tool, furniture brush, ergonomic corner attachment, and charging station.

2.1 to wa irinše

• Main igbale Unit
• Itẹsiwaju Tube
• UltimatePower Multi-floor Nozzle
• UltimatePower Mop Nozzle (for wet cleaning)
• Ọpa Crevice
• Furniture fẹlẹ
• Ergonomic Corner Attachment
• Gbigba agbara gbigba agbara
• Spray Bottle (for mop nozzle)
• Batiri Lithium-ion (ti a ti fi sii tẹlẹ tabi ti a ya sọtọ)

3. Eto

3.1 Apejọ

1. Yọọ kuro: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. So Ọpọn Ifaagun So mọ: Connect the extension tube to the main vacuum unit until it clicks into place.
3. So Nozzle: Select the desired nozzle (e.g., UltimatePower Multi-floor Nozzle) and attach it to the end of the extension tube.
4. Fifi sori batiri: If the battery is not pre-installed, slide the lithium-ion battery into the designated slot on the main unit until it locks securely.

This image illustrates the process of removing or inserting the lithium-ion battery from the main unit of the AEG Hygienic 8000 cordless vacuum cleaner.

3.2 Ngba agbara si Batiri naa

1. Position Charging Station: Gbé ibùdó gbigba agbara sori ilẹ ti o rọgbọkú, nitosi ibudo agbara.
2. Sopọ Ṣaja: Plug the charging adapter into the charging station and then into a wall outlet.
3. Dock Vacuum: Place the assembled vacuum cleaner onto the charging station. Ensure it is properly seated. The battery indicator lights on the control panel will illuminate to show charging status.
4. Gbigba agbara ni kikun: Allow the battery to fully charge before first use. A full charge typically takes several hours.

The AEG Hygienic 8000 cordless vacuum cleaner is shown docked in its charging station, ready for charging or storage. The charging station provides a convenient way to store the vacuum and its accessories.

4. Awọn ilana Iṣiṣẹ

4.1 Basic Operation (Dry Vacuuming)

1. Agbara Tan: Press the power button on the control panel to turn on the vacuum cleaner.
2. Yan Ipo: Use the mode selection buttons (Min, Auto, Mid, Turbo) to adjust suction power. The 'Auto' mode intelligently adjusts power based on the surface.
3. Igbale: Guide the vacuum cleaner across the surface to be cleaned. The powerful motor provides 6x more suction for thorough cleaning.
4. Lábẹ́ Àga: Awọn kekere-profile oniru faye gba o rọrun ninu labẹ aga.

A user is shown operating the AEG Hygienic 8000 cordless vacuum cleaner on a hard floor in a kitchen setting, demonstrating its ease of use for general cleaning.

The vacuum cleaner's low-profile head is depicted cleaning underneath a sofa, highlighting its ability to reach difficult areas.

The vacuum cleaner head is shown actively removing dirt and debris from a carpeted surface, illustrating its dry vacuuming performance.

4.2 Using the UltimatePower Mop Nozzle (Wet Cleaning)

The integrated UltimatePower Mop Nozzle allows for simultaneous vacuuming and wet cleaning.

1. Attach Mop Nozzle: Replace the standard floor nozzle with the UltimatePower Mop Nozzle.
2. Fill Spray Bottle: Fill the provided spray bottle with water or a suitable floor cleaning solution.
3. Spray Surface: Lightly spray the floor surface in front of the mop nozzle.
4. Activate Mop: The mop nozzle uses rotating pads to remove liquids and stubborn dirt.
5. Mọ: Guide the vacuum cleaner over the pre-sprayed area.

The UltimatePower Mop Nozzle is shown in action, effectively cleaning a liquid spill on a tiled floor, demonstrating its wet cleaning capability.

4.3 Iṣakoso igbimo Loriview

A alaye view of the vacuum cleaner's control panel, showing the power button, mode selection (Min, Auto, Mid, Turbo), and indicators for battery and water/wet cleaning.

• Bọtini agbara: Turns the vacuum cleaner on and off.
• Mode Selection (+/-): Cycles through suction modes: Min, Auto, Mid, Turbo.
• Atọka Batiri: Displays the current battery charge level.
• Wet Cleaning Indicator: Illuminates when the mop function is active or water is detected.

5. Itọju

Itọju deede ṣe idaniloju iṣẹ ṣiṣe ti o dara julọ ati fa gigun igbesi aye ẹrọ igbale rẹ.

5.1 Ofo Dustbin

1. Agbara Pa: Rí i dájú pé a ti pa ẹ̀rọ ìfọṣọ náà.
2. Yọ ìdọ̀tí kúrò: Locate the dustbin release button and detach the dustbin from the main unit.
3. Awọn akoonu ofo: Hold the dustbin over a waste bin and open the bottom flap to empty the collected dirt and debris.
4. Tún so ìdọ̀tí mọ́: Close the flap and reattach the dustbin to the main unit until it clicks securely.

5.2 Cleaning the 5-Stage Sisẹ Eto

Awọn 5-s ti o ni ilọsiwajutage filtration system removes up to 99.99% of micro-dust particles. Regular cleaning is crucial for maintaining suction power.

This image provides an exploded diagram of the vacuum cleaner's advanced 5-stage filtration system, showing the individual components that contribute to capturing micro-dust particles.

1. Wiwọle Ajọ: With the dustbin detached, carefully remove the filter components as shown in the diagram.
2. Awọn Ajọ mimọ: Tap the filters gently to remove loose dust. For thorough cleaning, rinse the washable filters under cold running water. Do not use detergents.
3. Gbẹ patapata: Allow all filter components to air dry completely for at least 24 hours before reassembling. Do not use heat to dry.
4. Ṣe atunto: Reinsert the dry filters into the dustbin in the correct order and reattach the dustbin to the main unit.

5.3 Brush Roll Clean Function

The Brush Roll Clean feature helps remove tangled hair and fibers from the brush roll.

1. Mu ṣiṣẹ: With the vacuum powered on and the floor nozzle attached, press the Brush Roll Clean pedal (if available on your model) for a few seconds.
2. Ṣayẹwo: The brush roll will automatically clean itself. Check the brush roll afterwards to ensure all debris has been removed.

6. Laasigbotitusita

Ti o ba ba pade awọn ọran pẹlu ẹrọ mimọ igbale rẹ, tọka si awọn iṣoro ati awọn ojutu ti o wọpọ wọnyi:

If the problem persists after trying these solutions, please contact AEG customer support.

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information, product registration, or technical support, please refer to the official AEG webojula tabi kan si wọn onibara iṣẹ Eka.

Atilẹyin Ayelujara: Ṣabẹwo si osise naa AEG webojula fun FAQs, awọn itọsọna laasigbotitusita, ati alaye olubasọrọ.

Awọn ile-iṣẹ iṣẹ: Information on authorized service centers can be found on the AEG webojula.