1. Ifihan
Thank you for choosing the CREWORKS Commercial Ice Maker, model CIM-9036. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your ice machine. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: The CREWORKS Commercial Ice Maker CIM-9036, a stainless steel unit designed for efficient ice production.
2. Awọn ilana aabo
IKILO: Ikuna lati tele awọn ilana aabo wọnyi le ja si ina, mọnamọna, tabi ipalara.
- Rii daju pe ipese agbara ibaamu voltage pato lori aami igbelewọn ohun elo.
- Do not operate the ice maker with a damaged power cord or plug. Contact qualified service personnel for repair.
- Jeki ohun elo kuro lati awọn orisun ooru ati oorun taara.
- Maṣe fi ohun elo, okun, tabi pulọọgi sinu omi tabi awọn olomi miiran.
- Unplug the ice maker before cleaning, maintenance, or when not in use.
- Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara, tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn. .
- Lo omi mimu nikan fun iṣelọpọ yinyin.
- Rii daju pe fentilesonu to dara ni ayika ẹyọ naa. Maṣe dina awọn atẹgun atẹgun.
3. Eto ati fifi sori
Proper setup is crucial for optimal performance and longevity of your ice maker. Follow these steps carefully:
- Ṣii silẹ: Carefully remove the ice maker from its packaging. Inspect for any shipping damage. Retain packaging for future transport if needed.
- Ibi: Place the unit on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for air circulation.
- Isopọ omi: The ice maker offers two water input options:
- Direct Water Supply: Connect the ice maker to a cold water tap using the provided water inlet hose. Ensure all connections are secure to prevent leaks. A water filter is recommended for optimal ice quality.
- Bottled Water Supply: Alternatively, you can place a standard bottled water dispenser on top of the unit for a manual water supply.
- Sisan omi: Connect the water drain hose to the unit and ensure it leads to a suitable drain. The drain must be lower than the ice maker's drain outlet for gravity drainage.
- Asopọ agbara: Pulọọgi okun agbara sinu iṣan itanna ti ilẹ.
Image 3.1: Diagram illustrating the two water connection methods: direct tap connection with filter (left) and bottled water supply (right).
4. Awọn ilana Iṣiṣẹ
The CREWORKS Commercial Ice Maker features an intuitive control panel for easy operation.
Image 4.1: Close-up of the intuitive control panel and LCD screen, showing various settings and indicators.
- Agbara Tan: Tẹ bọtini agbara lori nronu iṣakoso lati tan ẹrọ naa.
- Ipilẹṣẹ Ice Ibẹrẹ: The machine will automatically start the ice-making cycle. The LCD screen will display relevant information such as ambient temperature and ice-making time.
- Adjusting Ice Thickness/Cycle Time: Use the '+' and '-' buttons on the control panel to adjust the ice-making cycle duration, which influences the thickness of the ice cubes.
- Isẹ aladaaṣe: The ice maker can be programmed for automatic start and stop times, allowing you to schedule ice production as needed. Refer to the control panel for specific programming instructions.
- Àkójọpọ̀ yinyin: Once an ice-making cycle is complete, the ice cubes will drop into the storage bin. The unit will pause if the ice bin is full (indicated by "Ice Full" on the display) and resume when ice is removed.
Image 4.2: Visual guide showing the simple three-step process: 1. Open water source, 2. Adjust ice making time on LCD, 3. Collect ice.
5. Itọju ati Cleaning
Ninu deede ati itọju ṣe idaniloju iṣelọpọ yinyin mimọ ati fa igbesi aye ohun elo rẹ pọ si.
- Iṣẹ Isọmọ Aifọwọyi: The ice maker is equipped with an auto-cleaning function. Press the "Cleaning" button on the control panel to initiate this cycle. This helps maintain internal hygiene.
- Ode Ninu: Mu ese ita kuro pẹlu asọ, damp cloth. For stainless steel surfaces, use a non-abrasive cleaner designed for stainless steel.
- Ìmọ́tótó Àpótí Yìnyín: Periodically remove the ice bin and wash it with mild soap and warm water. Rinse thoroughly and dry before placing it back.
- Eto Omi Ninu: For thorough cleaning of the water system, it is recommended to run a cleaning solution (e.g., diluted vinegar or commercial ice maker cleaner) through the system periodically, followed by several rinses with fresh water. Always refer to the specific instructions for the cleaning solution used.
- Fifọ Afẹfẹ: The air vents and condenser coils should be cleaned regularly to ensure efficient cooling. Use a soft brush or vacuum cleaner to remove dust and debris.
Image 5.1: A hand activating the auto-cleaning function on the control panel, highlighting the importance of hygiene.
6. Laasigbotitusita
Ṣaaju ki o to kan si atilẹyin alabara, jọwọ tọka si awọn ọran ti o wọpọ wọnyi ati awọn ojutu wọn:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ice alagidi ko producing yinyin. | No water supply; clogged water filter; ambient temperature too high; power issue. | Check water connection and supply; replace water filter; ensure proper ventilation; check power cord and outlet. |
| Ice cubes kere ju tabi rirọ. | Short ice-making cycle; high water temperature; poor ventilation. | Increase ice-making cycle duration using '+' button; ensure cold water supply; improve ventilation around the unit. |
| "Ice Full" indicator remains on. | Ice bin is full; ice sensor is blocked or faulty. | Remove ice from the bin; clean the ice sensor area. |
| Ariwo dani nigbati isẹ. | Ẹ̀yà náà kò ní ìpele; ìdíwọ́ afẹ́fẹ́; àwọn èròjà tí kò ní ìpele. | Ensure the unit is on a level surface; check for obstructions in fan area; contact support if noise persists. |
| Omi jijo. | Loose water connections; clogged drain hose. | Tighten all water inlet and drain connections; clear any blockages in the drain hose. |
7. Awọn pato
Technical details for the CREWORKS Commercial Ice Maker CIM-9036:
- Awoṣe: CIM-9036
- Brand: Awọn iṣẹ ṣiṣe
- Agbara: 480 Wattis
- Voltage: 220 Volts
- Daily Ice Production: Up to 58 kg (when water temperature is below 5°C)
- Ice Cubes per Batch: 36
- Agbara Ipamọ Ice: 10 kg
- Product Dimensions (Approximate): 43 cm (Ijinle) x 36 cm (Iwọn) x 76 cm (Iga)
- Ipele Ariwo: <45dB
- Ohun elo: Ounjẹ-Ipe Alagbara Irin
Image 7.1: Diagram showing the approximate dimensions of the ice maker: 43 cm depth, 36 cm width, and 76 cm height.
8. Atilẹyin ọja ati Onibara Support
For warranty information or technical assistance, please contact CREWORKS customer support. Keep your purchase receipt as proof of purchase.
Contact information can typically be found on the CREWORKS official webaaye tabi lori apoti ọja rẹ.
