1. Ifihan
The Smartgen BAC06A is an intelligent floating battery charger designed for lead-acid starting batteries, commonly used in diesel generator applications. It features a switching power structure, offering a wide range of AC voltage input, compact size, light weight, and high efficiency. This manual provides essential information for the safe and effective installation, operation, and maintenance of your BAC06A charger.
2. Key Awọn ẹya ara ẹrọ
- Switching Power Structure: Designed with advanced switch power components for high efficiency and reliability.
- Wide AC Voltage Wọle: Operates effectively across a broad range of AC input voltages (95-280VAC).
- Meji-Stage Charging Method: Utilizes a constant current followed by constant voltage gbigba agbara profile, optimizing battery life and preventing overcharging.
- Awọn ẹya Idaabobo: Includes built-in short circuit and reverse connection protection for enhanced safety.
- Ijade ti o le ṣatunṣe: Ngba agbara voltage and current can be precisely adjusted via potentiometers on the unit.
- Awọn itọkasi LED: Provides clear visual feedback for power status and charging activity.
- Apẹrẹ Iwapọ: Small volume and light weight for easy installation.
3. Alaye Aabo
Please read and understand all safety instructions before installing or operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Rii daju AC input voltage matches the charger's specified range (95-280VAC).
- Always disconnect AC power before making or breaking any connections to the charger or battery.
- Connect the battery with correct polarity (B+ to positive, B- to negative). Reverse connection protection is present, but incorrect wiring should always be avoided.
- Install the charger in a well-ventilated area to prevent overheating.
- Do not operate the charger in damp tabi awọn ipo tutu.
- Do not attempt to open or repair the charger. Refer all servicing to qualified personnel.
- Jeki kuro ni arọwọto awọn ọmọde.
4. Ọja Ipariview
The Smartgen BAC06A charger features a robust metal casing with ventilation for heat dissipation. The front panel provides all necessary connection terminals, indicators, and adjustment controls.
olusin 1: Angled view of the Smartgen BAC06A charger, showing its compact design and ventilation.
Figure 2: Front panel of the BAC06A charger, detailing the AC input (L, N), DC output (B-, B+) terminals, Power and Charging LEDs, 10A fuse, and adjustment potentiometers for voltage ati lọwọlọwọ.
4.1 irinše ati Atọka
- L, N Terminals: AC input connections (Live and Neutral).
- B-, B+ Terminals: DC output connections for the battery (Negative and Positive).
- LED agbara: Illuminates when AC power is supplied to the charger.
- LED gbigba agbara: Illuminates when the charger is actively charging the battery.
- FUSE (10A): Fiusi ti a ṣepọ fun aabo.
- VOLTS ADJ. Potentiometer: Used to adjust the charging voltage.
- AMP ADJ. Potentiometer: Used to adjust the charging current.
5. Awọn pato
The following table outlines the technical specifications for the Smartgen BAC06A 24V Intelligent Floating Battery Charger.
olusin 3: Isalẹ view of the BAC06A charger, showing mounting holes for secure installation.
| Ẹka | Nkan | Value (24V Model) |
|---|---|---|
| Iṣawọle | Orúkọ AC Voltage | AC (100 ~ 250) V |
| O pọju. AC Voltage | AC (90 ~ 280) V | |
| AC Igbohunsafẹfẹ | 50Hz/60Hz | |
| Ti o pọju Input Lọwọlọwọ | 2A | |
| Agbara agbara | 115W | |
| Abajade | Batiri Voltage | 24V |
| O pọju. Gba agbara lọwọlọwọ | 3A | |
| Gbigba agbara Voltage Ibiti | (26 ~ 29) V | |
| Gba agbara lọwọlọwọ Range | (1.5 ~ 3.5) A | |
| O pọju. Agbara | 75W | |
| Ko si-fifuye Voltage | 27.6V (Error ±1%) | |
| Ko si-fifuye agbara agbara | <3W | |
| Iṣẹ ṣiṣe | Iṣẹ ṣiṣe | Diẹ ẹ sii ju 85% |
| Idabobo | Idabobo Resistance | Between input and output, input and shell both are: DC500V 1min R≥50MΩ |
| Idabobo Voltage | Laarin igbewọle ati iṣẹjade, titẹ sii ati ikarahun mejeeji jẹ: AC1500V 50Hz 1min | |
| Njo Lọwọlọwọ | IL≤3.5mA | |
| Ayika | Awọn iwọn otutu ṣiṣẹ | (-40~60)°C |
| Ibi ipamọ otutu | (-40~85)°C | |
| Ọriniinitutu ṣiṣẹ | 10% RH ~ 95% RH (Ko si isunmi) | |
| Ti ara | Awọn iwọn (L×W×H) | 143mm × 96mm × 55mm |
| Iwọn | 0.65kg |
6. Eto ati fifi sori
Follow these steps for proper installation of your BAC06A charger.
6.1 Iṣagbesori
- Select a dry, well-ventilated location, away from direct sunlight, heat sources, and flammable materials.
- Ensure there is sufficient space around the charger for air circulation.
- Mount the charger securely using the mounting holes provided on its base.
6.2 Awọn isopọ onirin
Refer to Figure 2 for terminal locations. Ensure all connections are tight and secure to prevent loose contacts and potential hazards.
- Asopọ batiri:
- Connect the battery's positive (+) terminal to the charger's B+ ebute.
- Connect the battery's negative (-) terminal to the charger's B- ebute.
- Important: Double-check polarity before connecting.
- Isopọwọle AC:
- Connect the Live (L) wire of your AC power supply to the charger's L ebute.
- Connect the Neutral (N) wire of your AC power supply to the charger's N ebute.
- Ensure the AC power source is within the specified range of 95-280VAC.
7. Isẹ
Once properly installed and wired, the BAC06A charger is ready for operation.
7.1 Ibẹrẹ Agbara-soke
- After all connections are made, apply AC power to the charger.
- Awọn LED Agbara should illuminate, indicating that the charger is receiving power.
- If a battery is connected and requires charging, the LED gbigba agbara yoo tun tan imọlẹ.
Ọdun 7.2 Voltage Atunṣe
Vol gbigba agbaratage can be adjusted to match specific battery requirements. This adjustment should be performed with the battery disconnected from the charger.
- Disconnect the battery from the charger's B- and B+ terminals.
- Apply AC power to the charger.
- Using a voltmeter, measure the output voltage across the B- and B+ terminals.
- Fara tan-an VOLTS ADJ. potentiometer (refer to Figure 2) until the desired voltage is achieved. For a 24V system, the typical float charge voltage ni ayika 27.6V.
- Once adjusted, disconnect AC power and reconnect the battery.
7.3 Lọwọlọwọ tolesese
The charging current can also be adjusted. This is typically done when the battery voltage is below 25.0V (for a 24V system).
- Ensure the battery is connected and the charger is powered on.
- Ti o ba ti batiri voltage is below 25.0V, the charger will be in constant current mode.
- Using an ammeter in series with the battery, measure the charging current.
- Fara tan-an AMP ADJ. potentiometer (refer to Figure 2) to set the desired charging current. The maximum charge current for the 24V model is 3A.
8. Itọju
The Smartgen BAC06A charger is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and performance.
- Ninu: Jẹ́ kí charger náà mọ́ tónítóní, kí ó má sì sí eruku tàbí ìdọ̀tí. Lo aṣọ gbígbẹ, rírọ̀ fún fífọ mọ́. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi.
- Awọn isopọ: Periodically check all wiring connections (AC input and DC output) to ensure they are tight and free from corrosion.
- Afẹfẹ: Ensure that the ventilation holes on the charger are not obstructed to allow for proper heat dissipation.
- Awọn ipo Ayika: Daju pe agbegbe iṣiṣẹ wa laarin iwọn otutu ti a sọ ati awọn sakani ọriniinitutu.
9. Laasigbotitusita
If you encounter issues with your BAC06A charger, consider the following basic troubleshooting steps:
- Charger Not Powering On (Power LED Off):
- Check the AC input power supply.
- Verify the AC input wiring (L and N terminals).
- Inspect the internal fuse (10A). If blown, replace with a fuse of the same rating.
- Charging LED Not Illuminating:
- Rí i dájú pé batiri náà so pọ̀ dáadáa pẹ̀lú polarity tó tọ́.
- Ṣayẹwo batiri voltage. If the battery is fully charged, the charging LED may not illuminate as the charger enters float mode.
- Ṣe àyẹ̀wò ìwọ̀n gbigba agbaratage setting using the VOLTS ADJ. potentiometer.
- Gbigba agbara kekere lọwọlọwọ:
- Ṣayẹwo awọn AMP ADJ. potentiometer setting.
- Ensure the battery is not already near full charge.
If problems persist after performing these checks, please contact your supplier or a qualified technician for assistance.
10. Atilẹyin ọja ati Support
Fun alaye atilẹyin ọja ati atilẹyin imọ-ẹrọ, jọwọ tọka si iwe ti a pese nipasẹ alagbata rẹ tabi kan si olupese taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.
