DEWALT 20V MAX Cordless Pruner (DCPR320D1) Instruction Manual

1. Ifihan

The DEWALT 20V MAX Cordless Pruner (DCPR320D1) is a high-performance tool designed for efficient cutting of thick flower stems, branch limbs, and bush overgrowth. With a 1-1/2 inch cutting capacity, it offers a lightweight build to reduce hand strain, making pruning tasks significantly easier than manual methods. This pruner features non-stick coated blades for smooth cuts and an integrated LED for improved visibility in low-light conditions.

2. Alaye Aabo

ÌKÌLỌ̀: Ka gbogbo ìkìlọ̀ àti ìtọ́ni ààbò kí o tó lo ọjà yìí. Àìtẹ̀lé àwọn ìkìlọ̀ àti ìtọ́ni lè yọrí sí ìkọlù iná mànàmáná, iná, àti/tàbí ìpalára ńlá.

• Máa wọ àwọn ohun èlò ààbò ara ẹni tó yẹ nígbà gbogbo, títí bí àwọn gíláàsì ààbò, ibọ̀wọ́, àti bàtà tó lágbára.
• Keep hands and body parts clear of the cutting blades during operation. The blades are sharp and move quickly.
• Ensure the tool is switched off and the battery is removed before performing any maintenance, cleaning, or blade changes.
• Do not operate the pruner in wet conditions or near flammable liquids or gases.
• Jeki awọn ọmọde ati awọn alafojusi kuro lakoko ti o nṣiṣẹ ọpa.
• Ọja yii ni awọn kemikali ti a mọ si Ipinle California lati fa akàn ati awọn abawọn ibimọ tabi ipalara ibisi miiran (Ikilọ 65 Ilana).

3. Ọja Ipariview

The DEWALT 20V MAX Cordless Pruner is engineered for durability and ease of use. Key features include:

• Non-Stick Coated Blades: Designed for smooth, swift cuts and reduced sap buildup.
• 1-1/2 Inch Cutting Capacity: Capable of cutting branches up to 1.5 inches in diameter.
• Imọlẹ iṣẹ LED ti a ṣepọ: Illuminates the cutting area for improved visibility in dimly lit spaces.
• Ọ̀nà Ìyípadà Abẹ́ Idára: Allows for easy and convenient blade replacement using the included tool.
• 20V MAX* Battery Compatibility: Utilizes DEWALT's 20V MAX* Lithium-Ion battery system for cordless operation.

Figure 1: DEWALT 20V MAX Cordless Pruner (DCPR320D1) with battery attached.

4. Eto

4.1 Fifi sori batiri

1. Rii daju pe batiri ti gba agbara ni kikun ṣaaju lilo akọkọ.
2. Ṣe deede idii batiri naa pẹlu ibudo batiri ni isalẹ ti mimu pruner.
3. Gbe idii batiri naa sinu ọpa titi yoo fi tẹ ni aabo sinu aaye.
4. Lati yọ batiri kuro, tẹ bọtini itusilẹ lori idii batiri naa ki o si rọra yọ jade.

olusin 2: Apa view of the DEWALT Cordless Pruner with battery attached.

5. Awọn ilana Iṣiṣẹ

5.1 Titan / Pa a

1. To power on the pruner, press and hold the main trigger for approximately 3 seconds until the blades open and a beep is heard.
2. To power off the pruner, press and hold the main trigger for approximately 3 seconds until the blades close and a beep is heard.

5.2 Ṣiṣe Ge

1. Position the open blades around the branch you wish to cut.
2. Ensure the branch is within the 1-1/2 inch cutting capacity.
3. Firmly press the main trigger to close the blades and make the cut. Release the trigger to open the blades for the next cut.
4. The integrated LED light will activate when the trigger is pulled, illuminating the cutting area.

Figure 3: User operating the DEWALT Cordless Pruner to cut a branch.

6. Itọju

6.1 Blade Cleaning and Lubrication

Regularly clean and lubricate the blades to maintain optimal performance and extend their lifespan. Use a soft cloth to wipe away sap and debris. Apply a few drops of lubricating oil to the blades after each use, especially after cutting resinous wood.

6.2 Blade Rirọpo

The pruner is designed for quick blade changes. Refer to the included change tool and follow these general steps:

1. Ensure the pruner is powered off and the battery is removed.
2. Use the provided Allen wrench to loosen and remove the retaining screw on the blade.
3. Ni ifarabalẹ yọ abẹfẹlẹ atijọ kuro.
4. Position the new blade, ensuring it aligns correctly with the mechanism.
5. Reinsert and tighten the retaining screw firmly.

olusin 4: Isunmọ view of the pruner's blade and retaining screw for maintenance.

7. Awọn pato

8. Laasigbotitusita

• Ohun èlò tí kò ṣiṣẹ́: Ensure the battery is fully charged and properly seated in the tool. Check for any debris obstructing the battery terminals.
• Àwọn abẹ́ tí kò gé dáadáa: The blades may be dull or dirty. Clean and lubricate the blades. If dull, replace them following the blade replacement instructions.
• Tool stops during operation: This may indicate a low battery charge or an overload condition. Recharge the battery or reduce the size of the branches being cut.

9. Atilẹyin ọja ati Support

For detailed warranty information, product registration, or technical support, please visit the official DEWALT webojula tabi olubasọrọ DEWALT iṣẹ onibara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.