1. Ifihan
Thank you for choosing the Einhell GE-CH 36/61 Li-Solo Power X-Change Cordless Hedge Trimmer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
The Einhell GE-CH 36/61 Li-Solo is designed for trimming hedges, shrubs, and bushes in domestic gardens and allotments. It is part of the Power X-Change family, utilizing two 18V lithium-ion batteries for 36V power. The tool features laser-cut and diamond-sharpened blades for precise cuts and a robust metal gearbox for durability.
2. Gbogbogbo Aabo Alaye
IKILO: Ka gbogbo awọn ikilọ ailewu, awọn itọnisọna, awọn apejuwe, ati awọn pato ti a pese pẹlu irinṣẹ agbara yii. Ikuna lati tẹle gbogbo awọn ilana ti a ṣe akojọ rẹ si isalẹ le ja si mọnamọna, ina, ati/tabi ipalara nla.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear, when operating the hedge trimmer.
- Keep children and bystanders away while operating the hedge trimmer.
- Do not operate the hedge trimmer in wet conditions or rain.
- Rí i dájú pé ibi iṣẹ́ náà kò ní àwọn ìdènà àti ìdọ̀tí kankan.
- Before performing any maintenance, cleaning, or storage, always remove the batteries from the tool.
- Inspect the hedge trimmer for damage before each use. Do not use if damaged.
- Hold the hedge trimmer firmly with both hands during operation.
3. Ọja Ipariview
The Einhell GE-CH 36/61 Li-Solo hedge trimmer is designed for efficient and comfortable hedge maintenance. Key features include:
- Power X-Change System: Utilizes two 18V batteries for 36V power, compatible with other Einhell Power X-Change tools.
- Awọn Abẹ Didara Ga: Laser-cut and diamond-sharpened blades with a 61 cm cutting length and 26 mm tooth spacing for clean, precise cuts.
- Robust Gearbox: Durable metal gearing ensures a long service life and up to 2,400 cuts per minute.
- Apẹrẹ Ergonomic: Optimized battery positioning and Softgrip handles provide comfortable handling for extended use.
- Waste Collector: A practical waste collector helps remove cuttings from the top of the hedge.
- Awọn ẹya Aabo: Two-hand safety switch, hand guard, aluminum blade guard, and shock protection for maximum user safety.
Figure 3.1: Einhell GE-CH 36/61 Li-Solo Cordless Hedge Trimmer, main view.
olusin 3.2: Isunmọ view of the hedge trimmer blade and the HEDGERAKER guard.
Figure 3.3: The hedge trimmer features high-quality laser-cut and diamond-sharpened blades for optimal cutting performance.
4. Eto
4.1 Fifi sori batiri
The Einhell GE-CH 36/61 Li-Solo requires two 18V Power X-Change batteries for operation. Batteries and charger are not included with the tool and must be purchased separately.
- Ensure the hedge trimmer is switched off and the safety switch is engaged.
- Locate the battery compartments on the tool handle.
- Slide fully charged 18V Power X-Change batteries into the compartments until they click securely into place.
- To remove batteries, press the release buttons on the batteries and pull them out.
Figure 4.1: Inserting an 18V Power X-Change battery into the hedge trimmer.
Figure 4.2: The hedge trimmer with both 18V Power X-Change batteries correctly installed.
Figure 4.3: Reminder that batteries and charger are sold separately.
5. Awọn ilana Iṣiṣẹ
5.1 Ṣaaju Isẹ
- Ensure all safety guards are in place and undamaged.
- Check the blades for sharpness and any signs of damage.
- Wọ awọn ohun elo aabo ti o yẹ.
- Clear the work area of any loose objects, wires, or debris.
5.2 Bibẹrẹ ati Duro Ọpa naa
- To start: Hold the hedge trimmer firmly with both hands. Press and hold the safety switch on the front handle, then simultaneously press the ON/OFF switch on the rear handle. The blades will begin to move.
- To stop: Release either the safety switch or the ON/OFF switch. The blades will stop immediately.
5.3 Ige imuposi
- Gígé Pẹtẹpẹtẹ: For the top of hedges, hold the trimmer with the blade slightly angled (5-10 degrees) towards the hedge. Move the trimmer steadily along the top, ensuring an even cut.
- Ina Ige For the sides of hedges, hold the trimmer vertically and move it in an arc motion from bottom to top, or top to bottom, depending on comfort and hedge height.
- Avoid cutting branches thicker than the maximum tooth spacing (26 mm).
- Do not force the tool through thick branches; this can damage the blades or motor.
5.4 Waste Collector
The integrated waste collector helps to direct cuttings away from the top of the hedge, making cleanup easier. Ensure it is properly attached before operation.
Figure 5.1: A user demonstrating the hedge trimmer in action on a large hedge.
6. Itọju
Ìtọ́jú déédéé ń jẹ́ kí ẹ̀rọ ìtọ́jú hedge rẹ pẹ́ títí, kí ó sì dáàbò bo iṣẹ́ rẹ̀.
6.1 Ninu
- Nigbagbogbo yọ awọn batiri ṣaaju ki o to nu.
- Clean the blades immediately after each use to prevent sap and debris buildup. Use a stiff brush and a suitable blade cleaning spray.
- Pa ile naa kuro pẹlu ipolowoamp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
- Ensure all ventilation openings are clear of debris.
6.2 Blade Care and Storage
- Periodically lubricate the blades with a light machine oil or blade lubricant to reduce friction and prevent rust.
- If blades become dull or damaged, they should be sharpened by a qualified professional or replaced.
- Store the hedge trimmer in a dry, secure location, out of reach of children.
- Always use the supplied blade sheath when storing or transporting the tool to prevent accidental injury and protect the blades.
Figure 6.1: Always use the blade cover for safe storage and transport.
Figure 6.2: The hedge trimmer can be conveniently stored on a wall mount.
7. Laasigbotitusita
Apá yìí yóò sọ̀rọ̀ nípa àwọn ìṣòro tó wọ́pọ̀ tí o lè bá pàdé pẹ̀lú ẹ̀rọ ìtọ́jú hedge rẹ.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹ̀rọ ìtọ́jú hedge kò bẹ̀rẹ̀. | Batteries not inserted correctly or discharged. Safety switch not engaged. | Ensure batteries are fully charged and correctly inserted. Press both safety switch and ON/OFF switch simultaneously. |
| Dinku Ige išẹ. | Awọn abẹfẹlẹ jẹ ṣigọgọ tabi idọti. | Clean blades thoroughly. If dull, have them sharpened or replaced. |
| Ọpa ma duro lakoko iṣẹ. | Overload protection activated. Batteries discharged. | Reduce cutting load. Allow tool to cool down. Replace or recharge batteries. |
| Gbigbọn ti o pọju. | Àwọn abẹ́ tí ó bàjẹ́ tàbí àwọn èròjà tí ó bàjẹ́. | Inspect blades for damage. Check for any loose screws or parts. If problem persists, contact customer support. |
8. Awọn pato
Technical data for the Einhell GE-CH 36/61 Li-Solo Cordless Hedge Trimmer:
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | GE-CH 36/61 Li |
| Orisun agbara | Battery-powered (2 x 18V Power X-Change) |
| Blade Ipari | 61 cm |
| Aaye eyin | 26 mm |
| Cuts per Minute | 2400 rpm |
| Awọn iwọn Ọja (L x W x H) | 106 x 23.5 x 20.5 cm |
| Iwọn | 2.8 kg |
| Blade elo | Irin |
| Olupese | Einhell |
| Ilu isenbale | China |
9. Atilẹyin ọja ati Support
9.1 atilẹyin ọja Alaye
This Einhell product is covered by a manufacturer's warranty. Spare parts availability is typically guaranteed for 2 years. Please refer to the warranty card included with your purchase or visit the official Einhell webAaye fun awọn ofin atilẹyin ọja alaye ni pato si agbegbe rẹ.
9.2 Onibara Support
For technical assistance, spare parts, or warranty claims, please contact Einhell customer support. Contact details can usually be found on the Einhell webaaye tabi ninu iwe ọja rẹ.
