UeeVii CPE820 Wireless Bridge Outdoor Point to Point Instruction Manual

1. Ọja Ipariview

The UeeVii CPE820 Wireless Bridge is designed for outdoor point-to-point wireless connectivity, enabling network extension over long distances. This package includes two CPE820 wireless bridges and two bridge bracket mounts, facilitating the creation of a stable and high-speed wireless link between two locations.

Awọn ẹya pataki:

• Gbigbe Iyara Giga: Achieves up to 1200Mbps wireless speed between bridges and up to 433Mbps actual wired speed via its Gigabit Ethernet port.
• Versatile Network Expansion: Ideal for extending networks to remote buildings such as old houses, barns, shops, or garages.
• Starlink Compatibility: Can be paired with Starlink routers to extend internet coverage to distant outbuildings.
• Surveillance Setup: Facilitates connecting IP cameras for monitoring large areas without complex wiring.
• Iduroṣinṣin Oju-ọjọ Gbogbo: A ṣe apẹrẹ fun lilo ita gbangba, ti o ni resistance si awọn ipo oju ojo oriṣiriṣi.

Figure 1.1: UeeVii CPE820 Wireless Bridge units. These devices establish a point-to-point wireless link to extend network connectivity.

2. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• 2 x UeeVii CPE820 Wireless Bridge Units
• 2 x Wireless Bridge Bracket Mounts
• 2 x PoE Adapters (Power over Ethernet)
• 2 x Awọn okun agbara
• Àwọn okùn Ethernet 2 x
• Mounting Hardware (screws, anchors, straps)
• Awọn ọna fifi sori Itọsọna

3. Eto ati fifi sori

3.1 Fifi sori ti ara

The CPE820 units are designed for outdoor mounting. Choose a location for each unit that provides a clear line of sight to the other unit for optimal performance. Ensure the mounting surface is stable and secure.

• Attach the bracket mount to the back of each CPE820 unit using the provided screws.
• Securely mount the brackets to a pole or wall using the appropriate mounting hardware. Ensure the units are oriented correctly for the desired signal path.
• Adjust the angle of the units using the anti-slip gear design on the bracket for precise alignment.

Figure 3.1: Bracket Mount Dimensions and Anti-slip Gear Design. The bracket allows for secure and adjustable mounting of the CPE820 units.

3.2 Powering the Devices (PoE)

The CPE820 units are powered via Power over Ethernet (PoE) using the included PoE adapters. They support a wide voltage ibiti o ti 24V to 48V.

• Connect one end of an Ethernet cable to the LAN port of the CPE820 unit.
• Connect the other end of this Ethernet cable to the "PoE" port on the PoE adapter.
• Connect another Ethernet cable from the "LAN" port on the PoE adapter to your network device (e.g., router, switch, or computer for initial configuration).
• Plug the power cord into the PoE adapter and then into a power outlet.

Figure 3.2: PoE Connection Diagram. The CPE820 receives power and data through a single Ethernet cable from the PoE adapter.

3.3 Initial Configuration and Pairing

The CPE820 units are designed for easy pairing. Follow these steps to establish a wireless bridge link:

• Power on both CPE820 units as described in Section 3.2.
• Identify one unit as the "Master" and the other as the "Slave".
• On the Master unit, set the physical switch (A/B) to position 'A'.
• On the Slave unit, set the physical switch (A/B) to position 'B'.
• The units should automatically pair. Observe the LED indicators on the units to confirm successful pairing (refer to the Quick Installation Guide for specific LED status meanings).
• For advanced configuration or troubleshooting, access the web management interface by connecting a computer directly to the LAN port of the PoE adapter connected to one of the CPE units. The default IP address and login credentials can be found in the Quick Installation Guide.

Figure 3.3: Easy Pairing Mechanism and Web Interface. The physical A/B switch simplifies the master/slave configuration for quick setup.

3.4 Network Expansion Scenarios

The CPE820 wireless bridge is versatile for various network extension needs.

Figure 3.4: Working with Starlink. The CPE820 can extend Starlink internet to remote locations.

Figure 3.5: Extending Network to Outbuildings. Ideal for providing internet access to distant structures.

4. Awọn ilana Iṣiṣẹ

Once the CPE820 units are installed and paired, they will automatically establish a wireless bridge. Data will be transmitted transparently between the two network segments connected by the bridges.

4.1 Transmission Performance

The CPE820 supports high-speed data transfer. Wireless transmission between the bridges can reach up to 1200Mbps, with actual wired speeds up to 433Mbps through the Gigabit port. Performance may vary based on environmental factors and distance.

Figure 4.1: Transmission Efficiency. Illustrates the potential data rates achievable with the CPE820 system.

4.2 Gbigbe Ibiti

The CPE820 is capable of transmitting data over distances up to 5 kilometers (approximately 3.1 miles) under optimal conditions with a clear line of sight.

Figure 4.2: Up to 5KM Transmission Range. Demonstrates the long-distance capability of the wireless bridge.

4.3 All-Weather Durability

The CPE820 units are built to withstand various outdoor elements, including rain, wind, and UV exposure, ensuring reliable operation in diverse weather conditions.

Figure 4.3: All-Weather Durability. The design ensures reliable performance in challenging outdoor environments.

5. Itọju

To ensure the longevity and optimal performance of your UeeVii CPE820 Wireless Bridge, consider the following maintenance tips:

• Ayẹwo igbagbogbo: Periodically check the physical condition of the units and mounting hardware for any signs of wear, damage, or loose connections.
• Ninu: Gently clean the exterior of the units with a soft, damp aṣọ láti mú ẹrẹ̀, eruku, tàbí ìdọ̀tí kúrò. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun ìfọmọ́ tí ó ń pa ara.
• Awọn imudojuiwọn famuwia: Check the UeeVii official webAaye ayelujara nigbagbogbo fun awọn imudojuiwọn famuwia. Mimu famuwia imudojuiwọn le mu iṣẹ ṣiṣe dara si, ṣafikun awọn ẹya tuntun, ati koju awọn ailagbara aabo.
• Awọn Okunfa Ayika: Ensure that the line of sight between the two units remains clear. Trim any growing vegetation or remove new obstructions that may interfere with the wireless signal.

6. Laasigbotitusita

If you encounter issues with your CPE820 Wireless Bridge, refer to the following common troubleshooting steps:

For further assistance, please contact UeeVii customer support.

7. Awọn pato

8. Atilẹyin ọja ati Support

UeeVii products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official UeeVii webAaye fun alaye atilẹyin ọja ofin ati ipo.

For technical support, troubleshooting assistance, or warranty claims, please contact UeeVii customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe ọja rẹ.

UeeVii Official Webojula: Visit UeeVii Store on Amazon