Ọrọ Iṣaaju
This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your NutriBullet Pro 900W Personal Blender. Please read all instructions thoroughly before first use and retain this manual for future reference.
The NutriBullet Pro is designed for blending whole foods into nutritious shakes, smoothies, and nut butters, utilizing a powerful 900-watt motor and refined nutrient extraction blades.
Ọja irinše
Your NutriBullet Pro 900W system includes the following components:
- (1) 900W Motor Base
- (1) Extractor Blade
- (2) 32 oz (900ml) Cups
- (2) To-Go Lids
- (2) Lip Rings
- (2) Handled Lip Rings
- (1) Recipe Book (for inspiration)
Image: All components of the NutriBullet Pro 900W blender system, including the motor base, two blending cups, extractor blade, to-go lids, and lip rings.
Eto ati Apejọ
- Yọ awọn ohun elo kuro: Fara yọ gbogbo awọn ohun kan kuro ninu apoti.
- Awọn ohun elo mimọ: Wash the cups, lids, and extractor blade with warm, soapy water before first use. Rinse thoroughly and dry. The motor base should only be wiped with a damp asọ.
- Ibi Mimọ Mọto: Position the 900W Motor Base on a clean, dry, and level surface. Ensure it is plugged into a grounded electrical outlet.
- Mura Awọn eroja: Add your desired ingredients into one of the 32 oz cups. Do not fill past the MAX line.
- Attach Extractor Blade: Screw the Extractor Blade firmly onto the open end of the cup, ensuring a tight seal.
Image: A person adding milk to a NutriBullet cup filled with fruits and berries, demonstrating ingredient preparation.
Awọn ilana Iṣiṣẹ
The NutriBullet Pro features simple push-button operation for efficient blending.
- Kojọpọ Awọn eroja: Fill the cup with your chosen ingredients. Ensure the liquid level does not exceed the MAX line.
- So Blade: Securely twist the Extractor Blade onto the cup.
- Ibi ti o wa lori ipilẹ mọto: Invert the cup and place it onto the 900W Motor Base. Align the tabs on the cup with the slots on the base.
- Activate Blending: Press down firmly on the cup and twist clockwise until the tabs lock into place. The motor will start automatically.
- Parapo: Blend until your desired consistency is achieved. For best results, blend in short bursts (pulsing) rather than continuous operation for more than 60 seconds at a time.
- Duro Idapọ: To stop, simply twist the cup counter-clockwise and lift it off the motor base.
- Sin: Remove the Extractor Blade and attach a To-Go Lid or Lip Ring if desired.
Image: A person placing a filled NutriBullet cup onto the motor base, ready for blending.
Itọju ati Cleaning
Proper cleaning ensures the longevity and hygiene of your NutriBullet Pro.
- Extractor Blade: Twist off the blade from the cup. Rinse the blade with soap and water immediately after use. For thorough cleaning, use a brush to remove any trapped food particles.
- Cups and Lids: The 32 oz cups, To-Go Lids, Lip Rings, and Handled Lip Rings are dishwasher safe (top rack only). Alternatively, wash them with warm, soapy water and rinse.
- Ipilẹ mọto: Never immerse the motor base in water or any other liquid. Wipe the motor base with a damp cloth to clean. If spills occur, wipe them immediately.
- Ibi ipamọ: Store the NutriBullet Pro in a clean, dry place when not in use.
Aworan: Isunmọ view of the stainless steel Extractor Blade, highlighting its design for efficient blending and ease of cleaning.
Laasigbotitusita
If you encounter issues with your NutriBullet Pro, refer to the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Blender ko ni tan-an. | Not properly assembled or plugged in. | Ensure the unit is securely plugged into a working outlet. Verify the cup and blade assembly are correctly twisted onto the motor base and locked into place. |
| Leaking during blending. | Blade not tightened sufficiently or cup overfilled. | Tighten the Extractor Blade firmly onto the cup. Do not fill ingredients past the MAX line. Check the O-ring for proper seating and damage. |
| Motor ma duro nigba isẹ ti. | Overheating due to continuous use or too much load. | Unplug the unit and allow it to cool down for at least 15-20 minutes. Reduce the amount of ingredients or add more liquid for easier blending. Avoid continuous blending for more than 60 seconds. |
| Àwọn èròjà tí kò dàpọ̀ dáadáa. | Insufficient liquid or too many hard ingredients. | Add more liquid to the mixture. Cut larger ingredients into smaller pieces. Use pulsing action to break down tougher items. |
Awọn pato ọja
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | NutriBullet |
| Nọmba awoṣe | NB9-1301ANB |
| Agbara | 900 Wattis |
| Agbara | 900 Milliliters (32 oz cups) |
| Àwọ̀ | Matte Navy Blue |
| Awọn iṣakoso Iru | Titari Bọtini |
| Blade elo | Irin ti ko njepata |
| Ohun elo Iru Ọfẹ | BPA Ọfẹ |
| Ọja Mefa | 12.01"D x 7.72"W x 15.94"H |
| Iwọn Nkan | 2 iwon |
| Orisun agbara | Okun Itanna |
Atilẹyin ọja ati Support
Your NutriBullet Pro 900W Personal Blender comes with a Atilẹyin ọja to lopin. For specific terms and conditions, please refer to the warranty documentation included with your product packaging or visit the official NutriBullet webojula.
For customer support, product registration, or to purchase replacement parts, please visit the official NutriBullet webojula tabi kan si wọn onibara iṣẹ Eka. Alaye olubasọrọ le ṣee rii ni igbagbogbo lori apoti ọja tabi osise ti ami iyasọtọ naa webojula.
Olupese: nutribullet
