1. Ifihan
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Ọja Ipariview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Iran Alẹ: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Wide Field ti View: 120° wide-angle lens for comprehensive monitoring.
- Apẹrẹ ti o tọ: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Gbigbe Ti ṣiṣẹ: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Eto
- Fi Awọn batiri sii: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Fi kaadi SD sii: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Agbara Tan: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Gbigbe Kamẹra:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Awọn ilana Iṣiṣẹ
4.1. Aṣayan Ipo
The camera has three main modes:
- PA: Pa kamẹra kuro.
- Idanwo: O faye gba o lati view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- LATI: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Eto | Apejuwe | Niyanju Iye |
|---|---|---|
| Ipo | Yan Fọ́tò, Fídíò, tàbí Fọ́tò+Fídíò. | Fọto+Fidio |
| Ipinnu Fọto | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Ipinnu fidio | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| Ifamọ PIR | Ṣàtúnṣe ìfàmọ́ra sensọ̀ ìṣíṣẹ́ (Gíga, Àárín, Kúrò). | Alabọde |
| Tesiwaju Aago | Time delay between detections (e.g., 5s, 10s, 30s). | Awọn aaya 10 |
| Ipari akoko | Capture images at set intervals regardless of motion. | Paa |
| Ọjọ & Aago | Ṣeto ọjọ ati akoko lọwọlọwọ. | Lọwọlọwọ |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Olusin 4.6: Example of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Itọju
- Ninu: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Rirọpo Batiri: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- Iṣakoso Kaadi SD: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Ibi ipamọ: Nigbati o ko ba wa ni lilo fun awọn akoko ti o gbooro sii, yọ awọn batiri kuro ki o fi kamẹra pamọ si ibi ti o tutu, ti o gbẹ.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Kamẹra ko ṣiṣẹ | Àwọn bátìrì tí ó kéré tàbí tí ó ti kú; ìpele agbára bátìrì tí kò tọ́; káàdì SD tí kò tọ́. | Replace batteries; check polarity; remove SD card and try powering on. |
| Aworan ti ko dara / didara fidio | Idọti lẹnsi; awọn ipo ina kekere; eto ipinnu ti ko tọ. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Aṣiṣe kaadi SD | SD card full; incompatible SD card; corrupted SD card. | Paarẹ files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Ipinnu Fọto | Titi di 32MP |
| Ipinnu fidio | Titi di 4K |
| Iyara Nfa | 0.1 aaya |
| Ibiti Iran Night | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| Iwọn Iwari PIR | Day: 80ft (24m), Night: 65ft (20m) |
| Aaye ti View | 120° Wide Lens |
| Mabomire Rating | IP66 |
| Awọn iwọn otutu ti nṣiṣẹ | -22°F si 158°F (-30°C si 70°C) |
| Ibi ipamọ | SD Card (up to 256GB, Class 10 or higher) |
| Ibi ti ina elekitiriki ti nwa | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Ifihan | 2.4'' LCD |
8. Atilẹyin ọja ati Support
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri webojula.
Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
