Toro Genuine OEM Rear Wheel Instruction Manual

Ọrọ Iṣaaju

This manual provides essential information for the proper installation, operation, and maintenance of your Toro Genuine OEM Rear Wheel, part number 140-2351. This wheel is designed for specific Toro FWD 22-inch / 55cm Recycler Lawn Mower models.

Compatible Mower Models:

• Model: 21442 (22in Recycler Lawn Mower)
• Model: 21445 (22in Recycler Lawn Mower with SmartStow)
• Model: 21447 (22in Recycler Lawn Mower)
• Model: 21770 (55cm Recycler Lawn Mower with SmartStow)

Alaye Aabo

Always ensure the lawn mower is turned off, spark plug wire disconnected, and engine is cool before attempting any installation or maintenance. Wear appropriate personal protective equipment, including gloves and eye protection.

Eto ati fifi sori

This section outlines the steps for replacing a rear wheel on compatible Toro FWD Recycler Lawn Mowers.

1. Mura Mower: Ensure the mower is on a flat, stable surface. Disconnect the spark plug wire to prevent accidental starting.
2. Yọ Kẹkẹ atijọ kuro: Locate the retaining bolt or nut securing the existing rear wheel. Use an appropriate wrench or socket to loosen and remove it. Carefully pull the old wheel off the axle.
3. Inspect Axle: Clean any debris from the axle and surrounding area. Inspect the axle for any damage or wear.
4. Fi Kẹkẹ Tuntun sori ẹrọ: Align the new Toro Genuine OEM Rear Wheel (Part No. 140-2351) onto the axle. Ensure the wheel is seated correctly and fully engaged with any drive gears or splines if applicable for FWD models.
5. Kẹkẹ to ni aabo: Reinstall the retaining bolt or nut. Tighten securely, but do not overtighten.
6. Idanwo: Gently spin the wheel to ensure it rotates freely. Reconnect the spark plug wire.

olusin 1: Apa view of the Toro Genuine OEM Rear Wheel (Part No. 140-2351), showing the robust tread pattern.

olusin 2: Top view of the Toro Genuine OEM Rear Wheel, highlighting the central hub and spoke design.

Awọn ero ṣiṣe

Once installed, the new rear wheel operates as part of your mower's drive system. The skid-resistant tread is designed to provide optimal traction during mowing operations, especially for front-wheel drive models.

olusin 3: Isunmọ view of the skid-resistant tread pattern on the Toro rear wheel, designed for enhanced traction.

Itoju

Regular maintenance ensures the longevity and performance of your rear wheel.

• Ninu: Periodically clean grass clippings and debris from around the wheel and axle area. This prevents buildup that could impede rotation or damage components.
• Ayewo: Regularly inspect the wheel for signs of wear, cracks, or damage to the tread. Check for any looseness in the axle connection.
• Lubrication: Consult your mower's specific manual for any recommended lubrication points around the wheel axle or bearings.

Nọmba 4: View of the inner hub structure of the Toro rear wheel, designed for durability and proper fitment.

Laasigbotitusita

If you encounter issues with your new rear wheel, consider the following:

• Wheel Not Turning Freely: Check for debris wrapped around the axle or inside the wheel hub. Ensure the retaining bolt/nut is not overtightened.
• Pípàdánù Ìfàmọ́ra: Inspect the tread for excessive wear or damage. Ensure the wheel is properly engaged with the mower's drive system (if applicable for FWD models).
• Ariwo Dani: This could indicate a loose wheel, worn bearing (if applicable), or debris. Disconnect spark plug, inspect, and re-secure.

If problems persist, contact a certified Toro service technician.

Awọn pato

Atilẹyin ọja ati Support

As a Genuine OEM part, this wheel is covered by Toro's standard warranty for replacement parts. Please refer to your original mower's owner's manual or visit the official Toro webAaye fun alaye atilẹyin ọja alaye ati awọn ofin.

For technical support or further assistance, please contact Toro customer service or an authorized Toro service dealer.

Figure 5: Official Toro and Toro Genuine Parts logos, indicating authenticity and quality.