TecTake Metal Office Cabinet with Lock

1. Ifihan

Thank you for choosing the TecTake Metal Office Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: TecTake Metal Office Cabinet with doors open, showcasing awọn agbara ibi ipamọ rẹ.

2. Alaye Aabo

Jọwọ ṣe akiyesi awọn itọnisọna ailewu wọnyi lati yago fun ipalara tabi ibajẹ ọja naa:

• Keep keys in a secure location and do not leave the cabinet unlocked when unattended.
• Exercise caution to avoid pinching fingers in the hinges of the swing doors during use.
• Ensure the cabinet is assembled on a flat, stable surface to prevent tipping.
• Do not exceed the maximum weight capacity per shelf (40 kg) to maintain stability and prevent structural damage.
• Jeki awọn ẹya kekere ati awọn ohun elo iṣakojọpọ kuro lọdọ awọn ọmọde lati ṣe idiwọ awọn eewu gige.

3. Package Awọn akoonu

Kí o tó kó gbogbo àwọn èròjà jọ, rí i dájú pé gbogbo wọn wà níbẹ̀ tí wọn kò sì bàjẹ́. Àpò náà gbọ́dọ̀ ní:

• Cabinet panels (sides, top, bottom, back, doors)
• Adjustable shelves (quantity: 3)
• Drawer components (quantity: 2 sets)
• Lock mechanisms and keys (8 keys total, 2 per lock)
• Assembly hardware (screws, bolts, nuts, shelf pins)
• Rubber buffers for silent door operation
• Ilana itọnisọna (iwe yii)

Ti eyikeyi awọn ẹya ba sonu tabi bajẹ, jọwọ kan si atilẹyin alabara ṣaaju ki o to tẹsiwaju pẹlu apejọ.

4. Apejọ Awọn ilana

Assembly requires careful attention to detail. It is recommended to have two people for assembly. A Phillips head screwdriver is the only tool required. Avoid using power drills, as overtightening can damage the metal.

4.1 Igbaradi

1. Ko aye titobi, mimọ, ati agbegbe alapin kuro fun apejọpọ.
2. Unpack all components and lay them out, identifying each part according to the provided parts list (if separate from this manual).
3. Ensure all hardware is sorted and easily accessible.

4.2 Igbesẹ-nipasẹ-Igbese Apejọ

1. Ṣe akojọpọ fireemu naa: Begin by connecting the side panels to the base and top panels using the provided screws. Ensure all connections are secure but do not overtighten until the entire frame is upright.
2. Fi Awọn Paneli Afẹyinti sori ẹrọ: Slide or attach the back panels into the designated grooves or screw points.
3. Ṣepọ Awọn apoti: Construct the two drawers. Pay close attention to the orientation of the drawer slides and the central support for the drawer mechanism. Incorrect orientation can prevent drawers and doors from closing properly.
   

   Figure 2: Detail of adjustable shelves, drawer, and lock mechanism.

4. Fi Awọn apoti sii: Carefully slide the assembled drawers into their respective compartments. Test their movement.
5. So awọn ilẹkun: Mount the four swing doors to the cabinet frame using the hinges. Ensure the rubber buffers are placed to allow for silent closing. Adjust hinges if necessary for proper alignment.
6. Install Locks: Secure the cylinder locks into the doors. Each lock comes with two keys. Test all locks to ensure they function correctly.
7. Ibi Awọn selifu Atunṣe: Insert the shelf pins into the desired height slots. Place the shelves onto the pins. The shelves are adjustable to accommodate various item sizes.
   

   Figure 3: Detail of adjustable shelf brackets.

8. Ṣayẹwo Ipari: Verify all screws are tightened, doors open and close smoothly, and drawers slide without obstruction.

For visual guidance, refer to the assembly diagrams provided in the separate assembly manual (if included) or the product images showing the assembled unit.

5. Isẹ

5.1 Awọn ilẹkun

The cabinet features four swing doors. To open, turn the key in the lock and pull the handle. To close, push the door firmly until it engages with the magnetic catch or lock mechanism, then turn the key to secure. The rubber buffers ensure quiet operation.

5.2 Awọn iyaworan

The two drawers are designed for smooth operation. Pull the handle to open and push to close. Each drawer has its own lock for securing contents. Insert the key and turn to lock or unlock.

5.3 adijositabulu selifu

The three adjustable shelves allow for flexible storage configurations. To adjust a shelf, remove all items from it, lift the shelf, and reposition the shelf pins into the desired slots on the cabinet sides. Ensure all four pins are securely seated before placing items back on the shelf.

Figure 4: Key features of the cabinet, including adjustable storage and secure locking.

6. Itọju

To ensure the longevity and appearance of your TecTake Metal Office Cabinet, follow these simple maintenance guidelines:

• Ninu: Pa gbogbo awọn oju ilẹ pẹlu asọ, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish. Dry thoroughly after cleaning.
• Locks and Hinges: Periodically check the locks and hinges for smooth operation. If they become stiff, a small amount of silicone-based lubricant can be applied.
• Iduroṣinṣin: Regularly check that all screws and connections remain tight. Retighten if necessary to maintain the cabinet's stability.
• Pipin iwuwo: Distribute weight evenly across shelves and drawers to prevent warping or instability.

7. Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú àpótí ìjókòó rẹ, wo àwọn ìṣòro àti ìdáhùn tí ó wọ́pọ̀ wọ̀nyí:

8. Awọn pato

Key technical specifications for the TecTake Metal Office Cabinet:

Figure 5: Dimensions of the TecTake Metal Office Cabinet.

9. Atilẹyin ọja ati Support

Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the retailer/manufacturer directly for details regarding warranty coverage and customer support.

For technical assistance or inquiries about replacement parts, please contact TecTake customer service through their official webaaye tabi alaye olubasọrọ ti a pese pẹlu rira rẹ.