Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Smart Motion Sensor Light. This hardwired outdoor floodlight features Bluetooth APP control, 5000K LED illumination, and IP65 waterproof rating, designed to enhance your home security and convenience.
Figure 1: OREiN Smart Motion Sensor Light with App Control Interface.
This image shows the OREiN Smart Motion Sensor Light mounted on an exterior wall, highlighting its sleek design and the accompanying smartphone application interface for control.
Alaye Aabo
- Aabo Itanna: Installation requires hardwiring to an AC power source (110 Volts). Ensure power is turned off at the circuit breaker before beginning installation. If you are not familiar with electrical wiring, consult a qualified electrician.
- Idaabobo omi: The product is IP65 waterproof, suitable for outdoor use. However, ensure all connections are properly sealed during installation to prevent water ingress into the wiring.
- Iṣagbesori: The base of the light is 5.12 inches x 5.12 inches. Verify sufficient space and a secure mounting surface before installation.
- Iwọn Iṣiṣẹ: Designed for outdoor conditions, but avoid extreme temperatures outside the specified operating range.
Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to tẹsiwaju pẹlu fifi sori ẹrọ:
- OREiN Smart Motion Sensor Light Unit (1 Head)
- Ohun èlò ìfipamọ́ (àwọn skru, àwọn èèpo wáyà, àmì ìfipamọ́)
- LED Beads (integrated)
- Filter Lens (integrated)
- Ilana Afowoyi (iwe yii)
Figure 2: Included Mounting Hardware.
This image displays the small bag containing the necessary screws, wire nuts, and mounting bracket for installation.
Eto ati fifi sori
Atokọ iṣaju fifi sori ẹrọ:
- Rí i dájú pé agbára ti pa ní ẹ̀rọ ìdènà ìṣiṣẹ́ kí o tó bẹ̀rẹ̀.
- Confirm the mounting location has sufficient space (base is 5.12"x5.12").
- Gather necessary tools (screwdriver, wire strippers, sealant).
Awọn igbesẹ fifi sori ẹrọ:
- Fix the Mounting Bracket: Secure the provided mounting bracket onto your junction box using the appropriate screws.
- So awọn Wires pọ: Carefully connect the wires of the same color (live, neutral, ground) from your house wiring to the light fixture's wires using the wire nuts. Ensure connections are secure.
- Secure the Wire Connection: Use electrical tape or additional sealant around the wire nuts and connections to enhance waterproofing and prevent moisture from reaching the electrical components.
- Ṣe aabo Imọlẹ naa: Attach the light fixture to the mounting bracket, ensuring it is firmly in place. Plug in any waterproof plugs if applicable.
Àwòrán 3: Ìlànà Ìfisílélẹ̀ ti paríview.
This visual guide illustrates the four main steps for installing the OREiN Smart Motion Sensor Light, from securing the mounting bracket to the final attachment of the light fixture.
App Download and Initial Pairing:
The OREiN Smart Motion Sensor Light is controlled via a Bluetooth-enabled app. Wa fun the "AiDot" app on your smartphone's app store (iOS or Android) and install it. Follow the in-app instructions to pair your device. The light will blink twice when it is in pairing mode.
Awọn ilana Iṣiṣẹ
Iṣakoso Afowoyi:
The light features a single button for basic control. Click the button (within 1 second) to cycle through the two primary modes: Light Mode and Motion Mode. Refer to the product packaging for a detailed diagram of manual mode cycling.
Smart App Control (Recommended):
For full customization and convenience, use the AiDot app. This allows you to adjust settings without needing a ladder.
- Titan/Pa Iṣakoso: Remotely turn the light on or off.
- Atunse Imọlẹ: Customize the light intensity from 0% to 100%.
- Eto Tẹlẹ: Switch between three main modes:
- Ipo išipopada: Light turns on when motion is detected and automatically turns off after a set delay time.
- Ipo Imọlẹ: Functions as a normal light, automatically turning on during its effective time (e.g., dusk to dawn).
- Ipo Aabo: Light deters intruders by flashing or changing color (e.g., red light flashes) when motion is sensed. This mode is primarily controlled via the app.
- Eto Aṣa: Set delay times for motion mode, dim light mode percentages, and night economy mode for reduced light pollution after midnight.
- Awọn aago: Schedule specific on/off times for the light.
- Iṣakoso Ẹgbẹ: Control multiple OREiN smart lights simultaneously via Bluetooth. Note: These lights are not compatible with Wi-Fi connection for group control.
Figure 4: Operational Modes.
This image illustrates the three primary operational modes: Motion Mode (light activates upon movement), Light Mode (continuous illumination), and Security Mode (flashing light for deterrence).
Figure 5: App Customization Interface.
This image displays the smartphone app's interface, demonstrating how users can customize the light's brightness, delay time, and effective operating hours.
Figure 6: Bluetooth Group Control.
This image illustrates the capability of controlling multiple OREiN lights simultaneously through Bluetooth, enabling synchronized lighting across different areas of a property.
Itoju
- Ninu: Máa fọ ohun èlò ìmọ́lẹ̀ náà lẹ́ẹ̀kọ̀ọ̀kan pẹ̀lú ohun èlò rírọ, damp aṣọ láti mú ìdọ̀tí àti ìdọ̀tí kúrò. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
- Ayewo: Regularly inspect the light for any signs of damage, loose connections, or wear. Ensure the IP65 seal remains intact.
- Wipe lẹnsi: Keep the filter lens clear to ensure optimal light output and motion sensor performance.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | No power, loose wiring, faulty unit. | Check circuit breaker. Verify all wire connections are secure. If issues persist, contact support. |
| Sensọ išipopada ko ṣe iwari. | Obstruction, incorrect sensitivity setting, sensor dirty. | Clear any obstructions. Adjust sensitivity in the app. Clean the sensor lens. |
| App Asopọmọra oran. | Bluetooth interference, light not in pairing mode, app outdated. | Ensure Bluetooth is enabled on your device. Restart the light. Update the AiDot app. Ensure you are within Bluetooth range. |
| Light flashes unexpectedly. | Security Mode activated, electrical fluctuation. | Check app settings to ensure Security Mode is not enabled. Consult an electrician if electrical issues are suspected. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | OREiN |
| Nọmba awoṣe | OL1900156 |
| Àwọ̀ | Dudu |
| Ara | Igbalode |
| Fọọmu Imuduro Imọlẹ | Odi |
| inu ile / ita gbangba Lilo | Ita gbangba |
| Orisun agbara | Hardwired (AC) |
| Iru fifi sori ẹrọ | Floor Mount (also supports Wall/Soffit) |
| Ọna Iṣakoso | App (Bluetooth) |
| Imọlẹ Orisun Orisun | LED |
| Ohun elo iboji | Polycarbonate |
| Nọmba Awọn orisun Imọlẹ | 1 |
| Voltage | 110 Volt (AC) |
| Light Awọ otutu | 5000K (funfun) |
| Wattage | 5.5 watt |
| Yipada Iru | Sensọ išipopada |
| Omi Resistance Ipele | IP65 Omi sooro |
| Imọlẹ | 720 lumen |
| Iwọn Nkan | 1.06 iwon |
| Ọja Mefa | 4.3 x 4.3 x 4.7 inches |
Atilẹyin ọja ati Support
OREiN provides comprehensive support for its products:
- Atilẹyin ọja: The OREiN Smart Motion Sensor Light comes with a 24-osu atilẹyin ọja.
- Iranlọwọ Ayelujara: Gbadun 7*24 hours online help for any using issues.
- Call Support: Call support is available during working hours at 1-844-506-1530.
- Pada: You can return any item purchased through Amazon's logistics. However, OREiN suggests contacting them before returning for potential direct resolution.
- Olubasọrọ: For any inquiries, contact OREiN directly on Amazon or search for their brand online.
