Linkind LL4000236

Ìwé Ìtọ́ni fún Àwọn Ìmọ́lẹ̀ Oòrùn Linkind (4-Pack, 27 LED, Sensọ Ìṣípo)

Awoṣe: LL4000236

1. Ifihan

Thank you for choosing Linkind Solar Fence Lights. This manual provides essential information for the proper installation, operation, and maintenance of your solar lights. Please read these instructions carefully before use and retain them for future reference.

2. Ọja Ipariview

The Linkind Solar Fence Lights are designed for outdoor use, providing illumination for fences, patios, stairs, and other areas. Each light features 27 LEDs, a motion sensor for enhanced security, and is powered by solar energy, offering an eco-friendly lighting solution. The lights are IP65 rated for weather resistance and emit a 3000K warm white light.

Linkind Solar Fence Lights product image showing one light enlarged and three smaller lights, highlighting the solar panel, motion sensor, and LED array.

Aworan 2.1: Pariview of the Linkind Solar Fence Lights, illustrating the design and components.

3. Awọn pato

Ẹya ara ẹrọSipesifikesonu
BrandLinkind
Nọmba awoṣeLL4000236
Awọn iwọn (L x W x H)10 x 5.3 x 5.8 cm
Iwọn530 g (per unit, approximate)
Batiri1 Lithium-ion (pẹlu)
IP RatingIP65 (Mabomire)
Nọmba ti LED27
Light Awọ otutu3000K Gbona White
Ohun eloAcrylonitrile Butadiene Styrene (ABS)
Pataki Awọn ẹya ara ẹrọOluwari išipopada
Orisun agbaraAgbara Oorun
Flux Imọlẹ200 lm

4. Package Awọn akoonu

Rí i dájú pé gbogbo ohun èlò wà níbẹ̀ àti pé wọ́n wà ní ipò tó dára nígbà tí o bá ń tú u:

  • 4 x Linkind Solar Fence Lights
  • Mounting Screws and Wall Plugs (quantity sufficient for 4 lights)
  • Ilana Afowoyi (iwe yii)

5. fifi sori

For optimal performance, choose an installation location that receives direct sunlight for at least 6-8 hours daily. Avoid areas under eaves, trees, or other obstructions that may block sunlight.

Igbesẹ Igbesẹ:

  1. Ṣetan Ilẹ: Identify the desired mounting location on a fence, wall, or stair riser. Ensure the surface is clean and stable.
  2. Samisi Awọn aaye Liluho: Hold the light in position and mark the two screw holes.
  3. Awọn iho iho: Use a drill to create holes at the marked points. Insert the provided wall plugs into the drilled holes.
  4. Ṣe aabo Imọlẹ naa: Align the light with the wall plugs and insert the screws, leaving a small gap (approximately 5mm) between the screw head and the wall.
  5. Gbe Imọlẹ naa duro: Hang the light onto the screws. Ensure it is securely fastened.
  6. Alternative Installation: For surfaces where drilling is not preferred, the lights can also be fixed using strong double-sided adhesive tape (not included).
Four-step installation guide for Linkind Solar Fence Lights. Step 1: Punch a hole in the wall. Step 2: Insert the gecko screw. Step 3: Insert the screw and leave a 5mm gap. Step 4: Hang the light. Dimensions of the light are also shown: 10cm width, 5.3cm depth, 5.8cm height.

Image 5.1: Step-by-step visual guide for mounting the solar fence lights.

Four application scenarios for Linkind Solar Fence Lights: Courtyard Fence, Stair Step, Patio Deck, and Wall, showing the lights installed and illuminated in each setting.

Aworan 5.2: Examples of suitable installation locations for the solar lights, including fences, stairs, and walls.

6. Isẹ

Initial Activation and Charging:

Before first use, ensure the lights are placed in direct sunlight for at least 8-10 hours to allow the internal battery to fully charge. The lights will automatically charge during the day and turn on at night.

Diagram showing the solar light charging during the day in sunlight and automatically lighting up at night for more than 8 hours.

Image 6.1: Illustration of the automatic charging during the day and illumination at night.

Awọn ọna Ṣiṣẹ:

The lights feature multiple working modes, selectable via a button on the unit. Press the button to cycle through the modes:

  • Mode 1 (Dim Light Mode): The light stays on at a dim level. When motion is detected, it brightens to 100% for 25 seconds, then returns to dim.
  • Mode 2 (Energy Saving Mode): The light remains off. When motion is detected, it brightens to 100% for 25 seconds, then turns off.
  • Mode 3 (Lights Off): The lights remain off at all times, regardless of motion.
Diagram illustrating three working modes: Dim Light Mode (dim light, brightens to 100% with motion), Energy Saving Mode (off, brightens to 100% with motion), and Lights Off (always off).

Image 6.2: Explanation of the three selectable lighting modes.

Iṣẹ Sensọ išipopada:

The integrated motion sensor detects movement within a specific range and angle, activating the brighter light modes as configured.

  • Ijinna Iwari: Titi de awọn mita 6 (20 ẹsẹ)
  • Igun Wiwa: 120 iwọn
Diagram showing the motion sensor's detection distance of 20ft/6m and a detection angle of 120 degrees, with a person walking into the detection zone.

Image 6.3: Details of the motion sensor's detection capabilities.

7. Itọju

Itọju deedee n ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti awọn ina oorun rẹ.

  • Ninu Igbimọ oorun: Lẹẹkọọkan nu nronu oorun pẹlu asọ, damp aṣọ láti mú eruku, ẹrẹ̀, tàbí ìdọ̀tí kúrò. Pẹpẹ mímọ́ máa ń jẹ́ kí agbára ìgbara ṣiṣẹ́ dáadáa.
  • Itọju Batiri: The integrated Lithium-ion battery is designed for long-term use. Avoid prolonged storage in a completely discharged state. If storing the lights, ensure they are fully charged first.
  • Idaabobo Ayika: The lights are IP65 rated, making them waterproof, frost-resistant, heat-resistant, and windproof. However, extreme weather conditions may temporarily affect performance.
Image showing the Linkind Solar Fence Light installed on a fence in rainy and snowy conditions, with icons indicating IP65 Waterproof, Frost-resistant, Heat-resistant, and Windproof features.

Image 7.1: Visual representation of the light's weather resistance features.

8. Laasigbotitusita

If you encounter issues with your Linkind Solar Fence Lights, refer to the following common problems and solutions:

IsoroOwun to le FaOjutu
Imọlẹ ko tan ni alẹ.Insufficient sunlight exposure; switch is off; battery is depleted.Ensure the light is placed in direct sunlight for 8-10 hours. Check if the operating mode is set to 'Lights Off' (Mode 3) and change it if necessary. Allow the battery to charge fully.
Ina ti wa ni baibai tabi nikan duro lori fun igba diẹ.Insufficient charging; dirty solar panel; aging battery.Relocate the light to an area with more direct sunlight. Clean the solar panel regularly. If the issue persists after prolonged use, the battery may need replacement (contact support).
Sensọ iṣipopada ko ṣiṣẹ tabi jẹ ifarabalẹ pupọ.Sensor obstructed; incorrect mode selected; environmental interference.Ensure the sensor lens is clean and unobstructed. Verify the light is in Mode 1 or Mode 2. Avoid installing near heat sources or reflective surfaces that might trigger the sensor.

9. Alaye Aabo

  • Do not disassemble or modify the product. This may cause damage and void the warranty.
  • Pa ọja naa mọ kuro ninu ina tabi iwọn otutu giga.
  • Do not immerse the product in water, despite its waterproof rating, to prevent potential damage to internal components.
  • Dispose of batteries according to local regulations. Do not dispose of batteries in household waste.
  • Ensure proper installation to prevent the light from falling and causing injury or damage.

10. Atilẹyin ọja ati Support

Linkind products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official Linkind webojula.

Awọn iwe aṣẹ ti o jọmọ - LL4000236

Ṣaajuview Linkind Solar Landscape Spotlights Afọwọṣe olumulo
Comprehensive user manual for Linkind Solar Landscape Spotlights, covering specifications, installation methods (ground and wall mount), operation modes, essential tips for optimal performance, and troubleshooting guidance.
Ṣaajuview Linkind 16 Awọn LED RGBW Solar Landscape Spotlights Afowoyi olumulo
Itọsọna olumulo fun Linkind 16 LED RGBW Solar Landscape Spotlights, awọn alaye alaye, fifi sori ẹrọ, awọn ipo iṣẹ, awọn imọran gbona, ati laasigbotitusita fun itanna ọgba ita gbangba.
Ṣaajuview Linkind Solar Landscape Spotlights Afọwọṣe olumulo
Iwe afọwọkọ olumulo pipe fun Linkind Solar Landscape Spotlights, awọn alaye ibora, fifi sori ẹrọ, iṣẹ ṣiṣe, awọn ipo iṣẹ, laasigbotitusita, ati alaye atunlo batiri.
Ṣaajuview Linkind Smart LED Solar Pathway Lights User Manual
Comprehensive user manual for Linkind Smart LED Solar Pathway Lights, detailing specifications, installation, operation, lighting modes, app control, troubleshooting, and support contact information.
Ṣaajuview Ìtọ́sọ́nà Ìṣiṣẹ́ Ohun èlò Linkind Smart Permanent Lights
Ìtọ́sọ́nà tó péye lórí sí fífi Linkind Smart Permanent Lights sí, sísopọ̀, àti ṣíṣiṣẹ́ nípa lílo ohun èlò AiDot, bí a ṣe ń ṣètò, ìṣàkóso àwọ̀, àwọn ipa, ìṣọ̀kan orin, àwọn aago, àti ìṣòro.
Ṣaajuview Linkind Solar Landscape Light User Manual: Installation, Operation, and Troubleshooting
Comprehensive user manual for Linkind Solar Landscape Lights. Learn about specifications, installation, operation modes (Solid Color, Mix Color, Color Cycling), warm tips, and troubleshooting for your outdoor solar lighting.