Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your Pentair FreshPoint F2000-B2B 2-Stage Undersink Water Filtration System. This system is designed to provide cleaner, refreshing water directly from your desired sink, reducing over 60 contaminants including PFAS (PFOA/PFOS).
Figure 1: Pentair FreshPoint F2000-B2B System Overview
Key Awọn ẹya ara ẹrọ ati awọn anfani
- Twin Carbon Block Filters: Reduces sediment and over 60 contaminants, including Chlorine Taste & Odor, Lead, Atrazine, Lindane, Nominal Particulate, Class I, VOC's, PFOA/PFOS, and Cysts such as Cryptosporidium and Giardia.
- PFAS Reduction: Certified by IAMPO R&T against NSF/ANSI 53 for the reduction of up to 98% of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS).
- Easy Cartridge Change-outs: Click-in cartridges ensure effortless replacement.
- Color-Coded Cartridges: Maintains proper filter sequence for correct installation.
- 3/8" Push Fittings: Apẹrẹ fun fifi sori ẹrọ ti o rọrun.
- Integrated Check Valves: System designed with integrated check valves so cold water line does not need to be shut off to perform cartridge change-outs.
Ohun ti o wa ninu Apoti
The Pentair FreshPoint F2000-B2B system includes the following components:
- Filter System with Twin Carbon Block Cartridges (F2B2-RC2 Twin Pack)
- Side Faucet
- Ohun elo Fifi sori ẹrọ
Eto ati fifi sori
Follow these steps to properly install your Pentair FreshPoint F2000-B2B system. Ensure you have all necessary tools and components before beginning.
Awọn imọran fifi sori ẹrọ:
- Yan ipo iṣagbesori ti o dara lati ṣe atilẹyin iwuwo kikun ti eto nigbati o nṣiṣẹ.
- Fi sori ẹrọ ni inaro pẹlu katiriji ti o wa ni isalẹ.
- The system can be installed with cartridge flush to the baseboard if desired, as the mechanical assist lever pushes cartridges straight out.
- A magnetic timer may be removed from the system and placed in alternative locations such as on the refrigerator.
Figure 2: Typical Undersink Installation Diagram
Awọn igbesẹ fifi sori ẹrọ gbogbogbo:
- Ṣetan Agbegbe: Clear the space under your sink where the filter system will be mounted. Ensure easy access for future filter changes.
- Mount the Filter Head: Securely mount the filter head to the cabinet wall using the provided screws. Ensure it is level and at least 2 inches higher than the bottom of the cabinet to allow for easier filter changes.
- So Ipese Omi: Shut off the cold water supply to your sink. Disconnect the existing cold water line from the faucet.
- Install Inlet/Outlet Hoses: Connect the inlet hose from the cold water supply valve to the 'IN' port on the filter head. Connect the outlet hose from the 'OUT' port on the filter head to your faucet's cold water line. Use the 3/8" push fittings for easy connection. If your angle valve outlet is 1/2", use the provided 3/8"-1/2" converter.
- Fi sori ẹrọ Faucet (ti o ba wulo): If installing a new dedicated faucet, follow its specific instructions for mounting and connecting to the filtered water line.
- Mu Ipese Omi pada: Slowly turn on the cold water supply valve. Check for any leaks.
- Pa eto naa: Turn on the filtered water faucet and allow water to run for at least 5 minutes to flush out air and carbon fines before initial use.
Awọn ilana Iṣiṣẹ
Once installed, your Pentair FreshPoint F2000-B2B system operates automatically. Simply turn on your dedicated filtered water faucet to dispense clean, filtered water. The system is designed for continuous use with cold water only.
Note that you may experience a slight decrease in water pressure compared to your unfiltered cold water line, which is normal for filtration systems.
Itoju
Regular maintenance, primarily filter cartridge replacement, is essential to ensure optimal performance and water quality.
Rirọpo Katiriji Ajọ:
- Replace cartridges after 675 galonu or gbogbo 1 odun, eyikeyi ti o ba akọkọ.
- Cartridges should be replaced earlier if you notice diminished flow or a change in water taste/odor.
- The system features integrated check valves, allowing for cartridge changes without needing to shut off the main cold water line.
- To replace, simply click out the old cartridges and click in the new ones, ensuring the color-coded cartridges are in the correct sequence.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Slow Water Flow | Àwọn káàtírì àlẹ̀mọ́ tí ó dí. | Replace filter cartridges. Ensure proper flushing after replacement. |
| Water Tastes/Smells Bad | Expired filter cartridges or improper flushing. | Replace filter cartridges. Flush the system for at least 5 minutes after replacement. |
| N jo ni Awọn isopọ | Àwọn ìsopọ̀ tí ó bàjẹ́ tàbí àwọn O-ring tí ó bàjẹ́. | Ensure all connections are tight. Check O-rings for proper seating and damage; replace if necessary. |
| Ko si ṣiṣan omi | Water supply valve is off, or severe clog. | Check that the cold water supply valve is fully open. If still no flow, replace cartridges. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Pentair |
| Orukọ awoṣe | F2000-B2B |
| Pataki Ẹya | NSF ifọwọsi |
| Ohun elo | Irin ti ko njepata |
| Agbara | 675 galonu |
| Iru fifi sori ẹrọ | Labẹ rì |
| Ọna iwẹnumọ | Erogba Àkọsílẹ |
| Orisun agbara | Isẹ afọwọṣe |
| Iwọn Nkan | 7.64 iwon |
| Package Mefa | 14.37 x 12.44 x 10.83 inches |
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official Pentair webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.
