Ìwé Ìtọ́sọ́nà Olùlò Olùṣàkóso Òtútù Reptile DIGITEN TTC-1003

1. Ifihan

The DIGITEN TTC-1003 is a versatile 3-stage outlet temperature controller designed for precise environmental management. It features two temperature-controlled outlets and one timer-controlled outlet, allowing for independent regulation of heating, cooling, and lighting cycles. This device is suitable for a wide range of applications, including reptile habitats, incubators, greenhouses, mushroom cultivation, and home brewing. This manual provides detailed instructions for the safe and effective operation of your TTC-1003 controller.

Figure 1: DIGITEN TTC-1003 Temperature Controller

2. Alaye Aabo

Jọ̀wọ́ ka gbogbo ìlànà ààbò kí o sì lóye rẹ̀ kí o tó lo ẹ̀rọ náà. Àìtẹ̀lé àwọn ìlànà wọ̀nyí lè fa ìkọlù iná mànàmáná, iná, tàbí ìbàjẹ́ sí ọjà náà.

• Rii daju pe ipese agbara voltage matches the specifications of the controller (100-240V AC).
• Do not immerse the main controller unit in water or expose it to excessive moisture. The temperature probes are waterproof, but the main unit is not.
• Máa yọ ẹ̀rọ náà kúrò nínú ihò agbára kí o tó sọ ọ́ di mímọ́ tàbí kí o ṣe àtúnṣe èyíkéyìí.
• Do not exceed the maximum rated current of 15A for the entire unit.
• Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde ati awọn ohun ọsin.
• Do not disassemble or modify the controller. Refer all servicing to qualified personnel.
• Ensure all connected appliances are in good working condition and do not exceed the controller's wattage ifilelẹ.

3. Ọja Ipariview

3.1 irinše

• DIGITEN TTC-1003 Controller Unit
• 2 x Temperature Sensor Probes (2m / 78.74in each)
• Power Cord (1.4m / 55.12in)

3.2 Key Awọn ẹya ara ẹrọ

• Rọrun-lati Lo: Plug-and-play design with a large LCD display.
• Iṣakoso Ominira: Two temperature-controlled outlets (OUT1, OUT2) and one timer-controlled outlet (OUT3) operate independently.
• Ibi iwọn otutu ti o tobi: Regulates and maintains temperatures from 14°F to 248°F (-10°C to 120°C).
• Àwọn Ìwádìí Sensọ Méjì: Two probes for reliable temperature tracking.
• Day/Night Temperature Control: Allows for different temperature settings for day and night cycles on temperature-controlled outlets.
• Iṣẹ ṣiṣe akoko: Outlet 3 offers a time cycle function for lighting or other timed devices.
• Iṣẹ Iranti: All settings are saved in the event of a power outage.
• Yipada Iwọn otutu: Rọrùn yípadà láàrin Celsius (°C) àti Fahrenheit (°F).
• Itaniji giga/Kekere: Provides alerts for temperature deviations.

Figure 2: Key Features of the TTC-1003

4. Awọn ilana iṣeto

4.1 Ibẹrẹ Ibẹrẹ

1. Choose a dry, stable location for the controller unit, away from direct sunlight or heat sources.
2. The unit can be wall-mounted using the integrated hanging slot on the back.

Figure 3: Wall-Mounted Installation

4.2 Connecting Probes and Devices

1. Plug the two temperature sensor probes into the designated ports on the top of the controller.
2. Position the sensor probes in the environment where temperature monitoring is required. Ensure they are not directly exposed to heating elements or water if not intended.
3. Plug your heating or cooling devices into OUT1 and OUT2. These outlets are temperature-controlled.
4. Plug your lighting or other timed devices into OUT3. This outlet is timer-controlled.
5. Plug the controller's power cord into a standard electrical outlet. The LCD display will illuminate.

Olusin 4: Example Applications and Connections

5. Awọn ilana Iṣiṣẹ

The controller features a large LCD display and three buttons: SET, Aago, ati Àwọn ọfà òkè/ìsàlẹ̀.

5.1 Ṣíṣeto Àkókò Lọ́wọ́lọ́wọ́

1. Tẹ mọlẹ Aago button for 3 seconds until the hour digit flashes.
2. Lo awọn Àwọn ọfà òkè/ìsàlẹ̀ lati ṣatunṣe wakati.
3. Tẹ Aago again to move to the minute digit, then adjust with Àwọn ọfà òkè/ìsàlẹ̀.
4. Tẹ Aago lati jẹrisi ati jade.

5.2 Temperature Control (Outlets 1 & 2)

Outlets 1 and 2 are independently controlled for temperature. Each can be set for heating or cooling mode with specific ON/OFF temperatures and operating times.

1. Tẹ mọlẹ SET button for 3 seconds to enter programming mode. The display will show 'OUT1' or 'OUT2' and the first setting will flash.
2. Lo awọn Àwọn ọfà òkè/ìsàlẹ̀ to select 'OUT1' or 'OUT2'. Press SET lati jẹrisi.
3. Ṣètò Àkókò Tí Ó Ń SÍ: The 'ON' time will flash. Use Àwọn ọfà òkè/ìsàlẹ̀ lati ṣeto wakati, lẹhinna tẹ SET to set minutes. This is the time when temperature control for this outlet begins.
4. Àkókò Ṣíṣí: The 'OFF' time will flash. Use Àwọn ọfà òkè/ìsàlẹ̀ lati ṣeto wakati, lẹhinna tẹ SET to set minutes. This is the time when temperature control for this outlet ends.
5. Set ON Temperature: The 'ON Temp' will flash. Use Àwọn ọfà òkè/ìsàlẹ̀ to set the temperature at which the connected device turns ON.
6. Set OFF Temperature: The 'OFF Temp' will flash. Use Àwọn ọfà òkè/ìsàlẹ̀ to set the temperature at which the connected device turns OFF.
7. Determine Mode (Heating/Cooling):
   • If ON Temp < OFF Temp: The controller operates in Alapapo Ipo. The device turns on when the temperature drops to ON Temp and turns off when it reaches OFF Temp.
   • If ON Temp > OFF Temp: The controller operates in Ipo itutu. The device turns on when the temperature rises to ON Temp and turns off when it reaches OFF Temp.
8. Tẹ SET to cycle through additional settings (High Alarm, Low Alarm, Calibration) or press Aago lati fipamọ ati jade.

Figure 5: Temperature Control Programming Example

5.3 Timer Control (Outlet 3)

Outlet 3 operates as a simple timer, allowing for two independent ON/OFF periods within a 24-hour cycle.

1. Tẹ mọlẹ SET button for 3 seconds to enter programming mode.
2. Lo awọn Àwọn ọfà òkè/ìsàlẹ̀ to select 'OUT3'. Press SET lati jẹrisi.
3. Set First ON Time: The 'ON' time for the first period will flash. Adjust with Àwọn ọfà òkè/ìsàlẹ̀ ati ki o jẹrisi pẹlu SET.
4. Set First OFF Time: The 'OFF' time for the first period will flash. Adjust with Àwọn ọfà òkè/ìsàlẹ̀ ati ki o jẹrisi pẹlu SET.
5. Tun awọn igbesẹ fun awọn Second ON Time ati Second OFF Time if a second timed period is desired. If not, set the second ON time to be the same as the second OFF time to disable it.
6. Tẹ Aago lati fipamọ ati jade.

Figure 6: Timer Control Programming Example for Outlet 3

5.4 Aṣayan Iwọn otutu (°C/°F)

To switch between Celsius and Fahrenheit, briefly press the Ọfà UP button while in normal operating mode.

5.5 High/Low Temperature Alarms (AH/AL)

You can set high and low temperature alarms for Outlets 1 and 2 to be notified if the temperature goes outside your desired range.

1. Enter programming mode for OUT1 or OUT2 (as described in 5.2).
2. After setting ON/OFF temperatures, press SET until 'AH' (High Alarm) flashes. Use Àwọn ọfà òkè/ìsàlẹ̀ to set the desired high temperature limit.
3. Tẹ SET until 'AL' (Low Alarm) flashes. Use Àwọn ọfà òkè/ìsàlẹ̀ to set the desired low temperature limit.
4. Tẹ Aago lati fipamọ ati jade.

6. Itọju

Regular maintenance ensures the longevity and accuracy of your DIGITEN TTC-1003 controller.

• Ninu: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Itọju Iwadii: Periodically inspect the temperature probes for any signs of damage or wear. Ensure the probes are clean for accurate readings. The probes are waterproof and can be cleaned with a damp asọ.
• Ibi ipamọ: If storing the device for an extended period, unplug it and store it in a cool, dry place.

Figure 7: Waterproof Temperature Probe

7. Laasigbotitusita

If you encounter issues with your controller, refer to the table below for common problems and solutions.

8. Awọn pato

9. Atilẹyin ọja ati Support

9.1 Atilẹyin ọja

DIGITEN provides a one-year warranty for any quality problems with this product. Please retain your proof of purchase for warranty claims.

9.2 Onibara Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DIGITEN customer support. You can find contact information and additional resources by visiting the official DIGITEN store:

Visit the DIGITEN Store on Amazon