Ìwé Ìtọ́ni Ìtọ́ni fún Olùdarí Arcade Aláìlókùn Retro-Bit BIG6 2.4 GHz

Ọrọ Iṣaaju

The Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller is designed for an enhanced gaming experience across multiple platforms, including Sega Genesis/Mega Drive consoles, PC, Mac, and other USB-enabled devices. This manual provides detailed instructions for the setup, operation, and maintenance of your controller.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Retro-Bit BIG6 Wireless Controller
• SEGA Genesis Wireless Receiver
• USB Alailowaya olugba
• USB-C Charge Cable (3.3ft / 1m)

Image: The Retro-Bit BIG6 Wireless Arcade Controller, including the controller itself, the Sega Genesis receiver, the USB receiver, and the product packaging.

Ọja Pariview

The BIG6 controller features a classic 6-button layout with modern enhancements for versatile gaming.

Adarí Ìfilélẹ

• Paadi itọsọna (D-paadi): For movement and navigation.
• Action Buttons (A, B, C, X, Y, Z): Six primary action buttons.
• Bọtini Ibẹrẹ: For pausing games or confirming selections.
• Bọtini Ile: For system-level functions (e.g., on Switch or PC).
• Yan Bọtini: For additional in-game or system functions.
• Shoulder Buttons (L, R): Located on the top edge for modern gaming controls.

Aworan: Iwaju view of the Retro-Bit BIG6 Wireless Arcade Controller, showing the D-Pad, six action buttons (A, B, C, X, Y, Z), Start button, and Sega Genesis logo.

Aworan: Oke view of the Retro-Bit BIG6 Wireless Arcade Controller, highlighting the L and R shoulder buttons.

Gbigba agbara Port

The controller features a USB-C port for charging its internal battery.

Aworan: Pada view of the Retro-Bit BIG6 Wireless Arcade Controller, displaying the central USB-C charging port and the L and R shoulder buttons.

Ṣeto

1. Gbigba agbara Alakoso

1. Connect the supplied USB-C charge cable to the controller's USB-C port.
2. So opin okun miiran pọ si orisun agbara USB (fun apẹẹrẹ, ibudo USB kọnputa, ohun ti nmu badọgba ogiri USB).
3. The LED indicator on the controller will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2-3 hours.

2. Connecting to SEGA Genesis/Mega Drive Console

1. Insert the SEGA Genesis Wireless Receiver into a controller port on your Genesis/Mega Drive console.
2. Ensure the console is powered on. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid.

3. Connecting to PC, Mac, or USB-Enabled Devices

1. Insert the USB Wireless Receiver into an available USB port on your PC, Mac, or other compatible device.
2. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid. The operating system should automatically detect the controller.

Awọn ilana Iṣiṣẹ

Titan / Paa

• Agbara Tan: Press and hold the Home button for approximately 3 seconds.
• Agbara Pa: The controller will automatically power off after a period of inactivity to conserve battery. To manually power off, press and hold the Home button for approximately 5-7 seconds until the LED indicator turns off.

Ipilẹ Lilo

Once connected, the controller functions as a standard gamepad. Button assignments may vary depending on the game or system. Refer to your game's instructions for specific control schemes.

Itoju

• Ninu: Lo asọ asọ ti o gbẹ lati nu oludari naa. Yago fun lilo awọn kẹmika lile tabi awọn ohun elo abrasive.
• Ibi ipamọ: Tọju olutọju naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Itọju Batiri: To prolong battery life, avoid fully discharging the controller frequently. Charge the controller regularly, even if not in use for extended periods.

Laasigbotitusita

Controller Not Connecting/Pairing

• Rii daju pe oludari ti gba agbara.
• Verify that the correct receiver (Genesis or USB) is securely plugged into the target device.
• Make sure the controller and receiver are within close proximity (recommended within 10 feet).
• If pairing issues persist, locate the small reset pinhole on the back of the controller. Use a thin object (like a paperclip) to press the button inside the pinhole for a few seconds, then attempt to re-pair.

Buttons Unresponsive or Incorrectly Mapped

• Rii daju pe oludari ti gba agbara ni kikun ati ti sopọ daradara.
• For PC/Mac, check the device's controller settings or calibration tools to ensure proper recognition and mapping.
• Some games may require specific controller configurations. Consult the game's manual.

Igbesi aye batiri kukuru

• Rii daju pe oludari ti gba agbara ni kikun ṣaaju lilo.
• Battery performance can degrade over time with repeated charge cycles.
• Operating in environments with extreme temperatures can affect battery performance.

Awọn pato

Atilẹyin ọja ati Support

Fun alaye atilẹyin ọja, atilẹyin imọ-ẹrọ, tabi iranlọwọ siwaju sii, jọwọ ṣabẹwo si Retro-Bit osise webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Retro-Bit Official Webojula: www.retro-bit.com