Onforu BDD100G-3

Ìtọ́sọ́nà Ìtọ́sọ́nà fún Ìmọ́lẹ̀ Ààbò LED Onforu 100W pẹ̀lú Sensọ Ìṣípo (Àwòṣe BDD100G-3)

For models: BDD100G-3

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.

The Onforu 100W LED Security Light is designed for outdoor use, providing bright illumination with energy efficiency and motion detection capabilities. It features a durable, waterproof design suitable for various weather conditions.

2. Alaye Aabo pataki

ÌKÌLỌ̀: Ewu ìkọlù iná mànàmáná. Yọ agbára kúrò ní fíùsì tàbí ẹ̀rọ ìfọ́mọ́ra kí o tó fi sori ẹ̀rọ tàbí kí o ṣe àtúnṣe sí i.

  • Ensure the power supply is turned off before attempting any installation or maintenance.
  • Onímọ̀ ẹ̀rọ iná mànàmáná tó mọ̀ nípa bí a ṣe ń kọ́ ọjà náà àti bí a ṣe ń lò ó àti ewu tó wà nínú rẹ̀ ló yẹ kí ó fi sori ẹ̀rọ náà.
  • Daju pe awọn ipese voltage tọ́ (AC 100-240V).
  • Ma ṣe fi sori ẹrọ lori awọn aaye ti o jẹ riru tabi itara si gbigbọn.
  • Rii daju pe gbogbo awọn asopọ wa ni aabo ati idabobo daradara.
  • Má ṣe wo ojú rẹ tààrà sí orísun ìmọ́lẹ̀ LED nígbà tí ó bá ń tàn, nítorí pé èyí lè ba ojú jẹ́.
  • This fixture is rated IP65 for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.

3. Ọja Ipariview

The Onforu 100W LED Security Light features three adjustable light heads and an integrated motion sensor. Its robust design ensures reliable performance in outdoor environments.

3.1 Key Awọn ẹya ara ẹrọ

  • Imọlẹ giga: 100W LED with 9000 lumens output, equivalent to 500W traditional bulbs.
  • Iwari išipopada: 180° sensing angle, detection range of 16.4 to 32.8 feet.
  • Apẹrẹ ti o le ṣatunṣe: Three light heads can be adjusted to cover a 270° illumination zone.
  • Ikole ti o tọ: Die-cast aluminum housing for efficient heat dissipation and extended lifespan.
  • Oju ojo: IP65 waterproof rating for protection against rain, sleet, and snow.
  • Ifipamọ Agbara: Reduces electricity consumption significantly compared to traditional lighting.

3.2 Ọja irinše

Refer to the image below for a visual representation of the product components.

Onforu 100W LED Security Light with Motion Sensor

Nọmba 1: Onforu 100W LED Security Light with Motion Sensor. This image displays the front view of the security light, showing its three adjustable LED panels and the motion sensor located beneath the central panel.

Bugbamu view of Onforu LED Security Light components

Nọmba 2: Bugbamu view illustrating the internal components of the LED security light, including the 100W LED lamp beads and high-precision light transmission design.

4. Awọn ilana fifi sori ẹrọ

Before beginning installation, ensure all necessary tools are available and the power supply is disconnected.

4.1 Recommended Mounting Height and Sensing Area

For optimal performance, install the light at a height of 10 to 16.4 feet (3 to 5 meters) from the ground. The motion sensor has a 180° sensing angle and can detect motion up to 16.4 to 32.8 feet (5 to 10 meters) away.

Motion detection range and recommended mounting height

Nọmba 3: Diagram showing the versatile motion detection capabilities, recommended mounting height (10-16 ft), and sensing distance (16.4-32.8 ft) for the security light.

Fidio 1: This video demonstrates the motion detection capabilities of the Onforu 100W LED Security Light, showing how it illuminates an area when a car or person approaches, and then turns off after a set time. It also highlights the wide illumination angle and range.

4.2 Wiring aworan atọka

The fixture requires a standard AC power connection. Follow the wiring color codes:

  • Waya Dudu: Live Wire (L)
  • Okun Alawọ ewe: Waya ilẹ (G)
  • Waya funfun: Waya Aidaduro (N)
Wiring diagram for Onforu LED Security Light

Nọmba 4: Detailed diagram showing the wiring connections (Live, Ground, Neutral) and overall dimensions of the security light.

4.3 iṣagbesori Igbesẹ

  1. Mura Ilẹ Iṣagbesori: Rii daju pe ipele iṣagbesori jẹ ti o lagbara ati pe o le ṣe atilẹyin iwuwo ti imuduro.
  2. So Awo Igbesoke: Secure the mounting plate to the wall or soffit using appropriate screws and anchors.
  3. Asopọmọra Waya: Carefully connect the Live, Ground, and Neutral wires from your power supply to the corresponding wires on the fixture. Use wire nuts to secure connections.
  4. Gbe Imuduro: Attach the light fixture to the mounting plate and secure it with the provided screw.
  5. Ṣatunṣe Awọn ori Imọlẹ: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten screws once adjusted. The light heads can be adjusted up to 270 degrees.
Installation steps for Onforu LED Security Light

Nọmba 5: Bugbamu view illustrating the easy installation process, showing the mounting plate, wiring connections, and how the fixture attaches.

Adjustable light heads of Onforu LED Security Light

Nọmba 6: Image demonstrating the adjustable light heads, allowing for a 270-degree detection zone and flexible illumination angles.

5. Awọn ilana Iṣiṣẹ

The motion sensor has three adjustable settings to customize its operation:

Motion sensor adjustment knobs

Nọmba 7: Close-up of the motion sensor with three adjustment knobs labeled DISTANCE, LUX, and TIME.

  • DISTANCE (Sensitivity): Adjusts the detection range of the motion sensor from 16.4 feet (Min) to 32.8 feet (Max). Turn the knob clockwise to increase sensitivity, counter-clockwise to decrease.
  • TIME (Delay Time): Sets how long the light remains on after motion is detected and no further motion is sensed. Adjustable from 10 seconds (Min) to 7 minutes (Max). Turn clockwise for longer duration.
  • LUX (Ẹ̀rọ Ìmọ́lẹ̀ Ayika): Determines the ambient light level at which the motion sensor will activate the light.
    • Day Mode (Sun icon): Motion detection works during both day and night.
    • Night Mode (Moon icon): Motion detection works only at night or in low-light conditions.
    Turn the knob towards the sun icon for day/night operation, and towards the moon icon for night-only operation.

6. Itọju

Itọju deede ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati igbesi aye gigun ti ina aabo rẹ.

  • Ninu: Máa fọ ohun èlò ìmọ́lẹ̀ àti lẹ́ńsì sensọ̀ ìṣípo lẹ́ẹ̀kọ̀ọ̀kan pẹ̀lú ohun èlò tó rọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
  • Ayewo: Regularly check for any loose wiring, damaged components, or signs of wear. Ensure the mounting is secure.
  • Awọn LED: A ti so orisun ina LED pọ mọ ara wọn, kii ṣe ohun ti olumulo le rọpo.
Onforu LED Security Light with IP65 waterproof rating in various weather conditions

Nọmba 8: Image illustrating the IP65 waterproof rating of the security light, showing its resilience in rain, snow, and sunny conditions.

7. Laasigbotitusita

If you encounter issues with your Onforu LED Security Light, refer to the following common problems and solutions:

IsoroOwun to le FaOjutu
Imọlẹ ko tan.
  • Ko si ipese agbara.
  • Incorrect LUX setting (set to night mode during daytime).
  • Motion sensor obstructed or faulty.
  • Ṣayẹwo fifọ Circuit ati awọn asopọ waya.
  • Adjust LUX setting to "Day Mode" (sun icon) for testing.
  • Ensure sensor is clear and test its functionality.
Imọlẹ duro nigbagbogbo.
  • Iṣipopada ti nlọ lọwọ ni agbegbe idanimọ.
  • TIME setning ti gun ju.
  • Sensọ ìṣípo tí kò tọ́.
  • Adjust sensor angle to avoid unwanted triggers.
  • Reduce TIME setting.
  • Contact customer support if sensor is suspected faulty.
Ina seju tabi flickers.
  • Ipese agbara ti ko ni iduroṣinṣin.
  • Loose onirin asopọ.
  • Aṣiṣe ọja.
  • Ṣayẹwo iduroṣinṣin orisun agbara.
  • Daju pe gbogbo awọn asopọ onirin wa ni aabo.
  • Kan si atilẹyin alabara.
Sensọ išipopada ko ṣe iwari.
  • DISTANCE setting too low.
  • Sensọ idiwo tabi idọti.
  • Incorrect mounting height.
  • Increase DISTANCE setting.
  • Clean sensor lens and remove obstructions.
  • Ensure mounting height is within 10-16.4 feet.

8. Awọn alaye ọja

Ẹya ara ẹrọẸ̀kúnrẹ́rẹ́
BrandOnforu
Orukọ awoṣeMotion Sensor Outdoor Light (BDD100G-3)
Wattage100 watt
Imọlẹ9000 Lumens
Iwọn otutu awọ6000 Kelvin (Cool White)
Imọlẹ Orisun OrisunLED
Ohun eloDie-cast Aluminum, Metal
Omi Resistance IpeleIP65 mabomire
Iyipo sensọ igun180°
Ijinna sensọ išipopada16.4 feet ~ 32.8 feet
Idaduro Time toleseseAwọn aaya 10 ~ iṣẹju 7
Ọja Mefa10"L x 7"W x 6"H
Iwọn Nkan3.05 iwon
Iru fifi sori ẹrọÒgiri Ògiri
inu ile / ita gbangba LiloIta gbangba

9. Atilẹyin ọja ati Support

The Onforu 100W LED Security Light (Model BDD100G-3) comes with a 2-odun atilẹyin ọja lati ọjọ ti o ra.

For technical support, warranty claims, or any questions regarding your product, please contact Onforu customer service. Refer to the official Onforu webojula fun awọn julọ lọwọlọwọ alaye olubasọrọ.

Atilẹyin Ayelujara: Ṣabẹwo si Onforu Store on Amazon fun alaye ọja ati awọn orisun atilẹyin.

Awọn iwe aṣẹ ti o jọmọ - BDD100G-3

Ṣaajuview Àwọn Ìmọ́lẹ̀ Ògiri Onforu PIR PIR pẹ̀lú Sensọ Ìṣípo - Ìwé Àfọwọ́kọ Ọjà
Ìwé ìtọ́sọ́nà ọjà tó péye fún àwọn ìmọ́lẹ̀ ògiri Onforu PIR LED pẹ̀lú sensọ̀ ìṣípo, àlàyé àwọn ìlànà àwòṣe, àkójọ àwọn èròjà, àwọn ìtọ́sọ́nà ìfisílé, àwọn ìtọ́sọ́nà iṣẹ́, àti àwọn àmọ̀ràn lórí ìṣòro.
Ṣaajuview Ina Odi LED ONFORU PIR pẹlu sensọ išipopada: Iwe afọwọkọ Ọja & Itọsọna fifi sori ẹrọ
This product manual provides detailed information on the ONFORU PIR LED Wall Lights with Motion Sensor, including safety instructions, specifications, installation steps, operation, and maintenance. Covers models BDD50G-2, BDD50G-3, BDC80G-3, and BDD100G-3.
Ṣaajuview Ìtọ́sọ́nà Ìbẹ̀rẹ̀ Kíákíá fún Àwọn Ìmọ́lẹ̀ Ògiri ONFORU PIR pẹ̀lú Sensor Ìṣípo - Àwọn Àwòrán BDB55G-3, BDI45G-2, BDC80G-3, BDL40G-3, BDD100G-3
Ìtọ́sọ́nà ìbẹ̀rẹ̀ kíákíá fún àwọn ìmọ́lẹ̀ ògiri ONFORU PIR pẹ̀lú sensọ̀ ìṣípo. Ó ní àwọn ìtọ́ni ìfisílé, àwọn pàtó, ìwọ̀n, iṣẹ́, àti ìṣòro fún àwọn àwòṣe BDB55G-3, BDI45G-2, BDC80G-3, BDL40G-3, BDD100G-3.
Ṣaajuview Awọn imọlẹ odi LED ONFORU PIR pẹlu Iṣipopada sensọ Itọsọna Ibẹrẹ kiakia
Itọsọna ibẹrẹ ni iyara fun ONFORU PIR Awọn imọlẹ odi LED pẹlu sensọ išipopada (awọn awoṣe BDB55G-3, BDI45G-2, BDC80G-3, BDD100G-3). Ni wiwa awọn paati, awọn ẹya, awọn pato, isẹ, igbaradi, fifi sori ẹrọ, ati laasigbotitusita.
Ṣaajuview Ìwé Ìtọ́sọ́nà Ọjà ONFORU D30BL LED RGB Flood Light Ìwé Ìtọ́sọ́nà Ọjà
Èyí ni ìwé ìtọ́ni ọjà tí a fọwọ́ sí fún ONFORU D30BL LED Flood Light. Ó fúnni ní àlàyé nípa àwọn ìṣọ́ra ààbò, àwọn ìlànà ìmọ̀-ẹ̀rọ, iṣẹ́ àpù àti ìṣàkóso latọna jijin, àwọn ìtọ́ni ìfisílé, àwọn ìtọ́ni ìtọ́jú, àti ìwífún nípa ìtújáde. Kọ́ bí a ṣe lè ṣètò àti lo iná ìkún omi RGB rẹ tí ó mọ́ tónítóní, tí kò ní omi.
Ṣaajuview Àwọn Ìmọ́lẹ̀ Ìkún Omi LED Onforu G20BL, G50BL, D100BL - Ìwé Ìtọ́sọ́nà Olùlò àti Ìwífún nípa Ààbò
Ìwé ìtọ́ni tó péye nípa lílo àti ìlànà ààbò fún àwọn iná ìkún omi LED Onforu G20BL, G50BL, àti D100BL. Ó ní àwọn ìtọ́ni lórí fífi sori ẹ̀rọ, àwọn ìlànà ìmọ̀-ẹ̀rọ, iṣẹ́ ìṣàkóso latọna jijin, àti àwọn àlàyé lórí àwọn olùpèsè.