Awọn iwe afọwọkọ+

mophie mpsgrgd-FL36630

mophie powerstation Go Portable Car Jump Starter and Power Bank

Model: mpsgrgd-FL36630

Ọrọ Iṣaaju

The mophie powerstation Go is a versatile portable device designed to provide power in various emergency situations. It functions as a car jump starter, a portable power bank for mobile devices, and a bright LED work light. This manual provides essential instructions for safe and effective use, maintenance, and troubleshooting of your powerstation Go.

Alaye Aabo

Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not expose the powerstation Go to moisture or extreme temperatures.
  • Ma ṣe gbiyanju lati tunto tabi yi ẹrọ naa pada.
  • Jeki kuro ni arọwọto awọn ọmọde.
  • Ensure proper polarity when connecting jumper cables to a vehicle battery. Incorrect connection can cause damage or injury.
  • Use only the provided jumper cables and charging accessories.
  • Yago fun ifihan pipẹ si imọlẹ orun taara.
  • If the device becomes excessively hot, discontinue use immediately.

Package Awọn akoonu

  • mophie powerstation Go
  • Mini Jumper Cables
  • Okun gbigba agbara (USB-C si USB-A)
  • Itọsọna olumulo

Ọja Pariview

Familiarize yourself with the components of your mophie powerstation Go.

mophie powerstation Go with flashlight end and control buttons
Iwaju view of the mophie powerstation Go, showing the flashlight, control buttons, and LED indicator lights.
Apa view of mophie powerstation Go showing USB-A port and jumper cable port
Apa view of the powerstation Go, highlighting the USB-A charging port and the dedicated port for jumper cables.
Close-up of mophie powerstation Go ports with protective cover open
Close-up of the powerstation Go's ports, including the USB-A output and the jumper cable input, protected by a cover.
  • Ina filaṣi LED: Located at one end, provides bright illumination.
  • Imọlẹ iṣẹ: Integrated into the body, offers broad area lighting.
  • Bọtini agbara: Activates the device and checks battery status.
  • Atọka Batiri LED: Displays the remaining charge level.
  • Ibudo Ijade USB-A: For charging mobile devices.
  • Jumper Cable Port: Dedicated port for connecting the mini jumper cables.
  • Ibudo Iwọle USB-C: For recharging the powerstation Go.

Setup: Initial Charging

Before first use, fully charge your mophie powerstation Go.

  1. Connect the provided USB-C charging cable to the USB-C input port on the powerstation Go.
  2. Connect the other end of the charging cable to a compatible USB wall adapter (not included) or a powered USB port.
  3. The LED battery indicator lights will illuminate and flash, indicating the charging status. All four lights will be solid when fully charged.
  4. Akoko gbigba agbara le yatọ da lori orisun agbara.

Awọn ilana Iṣiṣẹ

1. Fo Bibẹrẹ Ọkọ

Ensure the powerstation Go is at least 50% charged before attempting to jump start a vehicle.

  1. Connect the mini jumper cables to the jumper cable port on the powerstation Go. Ensure a secure connection.
  2. Sopọ awọn pupa clamp to the positive (+) terminal of the vehicle's dead battery.
  3. Sopọ awọn dudu clamp to a metal part of the vehicle's chassis (unpainted, non-moving part) or the negative (-) terminal of the battery, if accessible and safe.
  4. Once connected, the powerstation Go will automatically perform safety checks. Wait for the indicator light on the jumper cable connector to turn solid green.
  5. Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than three consecutive jump starts.
  6. Once the vehicle starts, immediately disconnect the black clamp, then the red clamp, and finally disconnect the jumper cables from the powerstation Go.

2. Charging Mobile Devices

Use the USB-A output port to charge your smartphone, tablet, or other USB-powered devices.

mophie powerstation Go charging a smartphone via USB-A port
The mophie powerstation Go connected to a smartphone, demonstrating its power bank functionality.
  1. Connect your device's USB charging cable to the USB-A output port on the powerstation Go.
  2. The powerstation Go will automatically begin charging your device. The LED battery indicator lights will show the remaining charge.
  3. Ge asopọ ẹrọ rẹ ni kete ti gbigba agbara ti pari.

3. Using the LED Flashlight and Work Light

The powerstation Go features both a focused LED flashlight and a broad work light.

mophie powerstation Go with orange work light illuminated
The powerstation Go with its work light illuminated in an orange warning mode.
mophie powerstation Go with white work light illuminated
The powerstation Go with its work light illuminated in a bright white mode for general illumination.
  • To activate the LED Flashlight: Press and hold the power button for 2 seconds. Press again to cycle through modes (high, low, strobe, off).
  • To activate the Work Light: Double-press the power button. Double-press again to cycle through modes (white, red, flashing red, off).

Itoju

  • Ninu: Mu ẹrọ naa nu pẹlu asọ ti o gbẹ. Maṣe lo awọn kẹmika lile tabi awọn ohun elo abrasive.
  • Ibi ipamọ: Store the powerstation Go in a cool, dry place away from direct sunlight. For optimal battery life, recharge the device every 3 months if not in regular use.
  • Itọju Batiri: The internal battery is not user-replaceable. Do not attempt to open the device.

Laasigbotitusita

IsoroOwun to le FaOjutu
Ẹrọ ko gba agbaraCharging cable or adapter faulty; port obstruction.Try a different USB-C cable and wall adapter. Ensure ports are clean and free of debris.
Vehicle not jump startingLow powerstation Go charge; incorrect cable connection; severely dead battery.Ensure powerstation Go is fully charged. Verify correct clamp polarity. Check vehicle battery for severe damage. Consult vehicle manual.
Mobile device not chargingPowerstation Go battery low; faulty USB cable; device incompatibility.Recharge powerstation Go. Try a different USB cable. Ensure your device is compatible with standard USB charging.
Awọn imọlẹ ko ṣiṣẹPowerstation Go battery low; incorrect button press.Recharge powerstation Go. Refer to "Using the LED Flashlight and Work Light" section for correct operation.

Awọn pato

  • Brand: mofi
  • Nọmba awoṣe: mpsgrgd-FL36630
  • Nọmba Abala Olupese: 401107454
  • Agbara Batiri: 9900 mAh (36.6 Wh)
  • Voltage: 12 Volts (for jump starting)
  • Iwọn Ọja: 1.07 kilo
  • Awọn iwọn: 30.3 x 24.69 x 10.79 cm (Apapọ)
  • Awọn ẹya pataki: LED Indicator Lights, 450-lumen LED Flashlight, Spark-proof Jumper Cables
  • Automotive Service Type: Truck, Car

Atilẹyin ọja ati Support

For warranty information and customer support, please visit the official mophie webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Atilẹyin Ayelujara: www.mophie.com/support