Cecotec Fast&Furious 6050 X-Treme Steam Iron

Ọrọ Iṣaaju

Thank you for choosing the Cecotec Fast&Furious 6050 X-Treme Steam Iron. This advanced steam iron is designed to provide efficient and effortless ironing with its powerful 3100W motor, integrated automatic water pump, and innovative features like the Double Turbo Anodized Pro soleplate and Smart Auto OFF system. Please read this manual carefully before first use to ensure proper operation, maintenance, and safety.

Awọn Itọsọna Aabo pataki

Nigbagbogbo tẹle awọn iṣọra aabo ipilẹ nigba lilo awọn ohun elo itanna lati dinku eewu ina, mọnamọna, ati ipalara ti ara ẹni.

• Ka gbogbo awọn ilana ṣaaju lilo irin.
• Do not leave the iron unattended while it is connected to the power supply or on an ironing board.
• Unplug the iron from the electrical outlet before filling with water, emptying, cleaning, or when not in use.
• Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. Contact authorized service personnel for examination and repair.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn.
• Pa irin ati okun rẹ mọ ni arọwọto awọn ọmọde.
• Maṣe fi irin naa bọ inu omi tabi awọn olomi miiran.
• Lo irin nikan fun lilo ti a pinnu rẹ.
• Do not use extension cords unless absolutely necessary. If an extension cord is used, it must be rated equal to or greater than the maximum rating of the iron.
• Irin naa gbọdọ ṣee lo ati ki o sinmi lori dada iduroṣinṣin.
• Maṣe fi ọwọ kan awọn aaye ti o gbona. Lo awọn ọwọ tabi awọn koko.

Ọja irinše

Familiarize yourself with the different parts of your Cecotec Fast&Furious 6050 X-Treme Steam Iron.

Aworan: Pariview of the Cecotec Fast&Furious 6050 X-Treme Steam Iron, highlighting its sleek design and key features like the water tank and control dial.

1. Omi Sokiri Nozzle
2. Omi Nkún Agbalagba
3. Steam Control Dial (MAX/MIN)
4. Dial Iṣakoso iwọn otutu
5. Handle with Touch Sensor
6. Water Tank (Transparent)
7. Bọtini sokiri
8. Steam Boost Button
9. Bọtini Ara-mimọ
10. Okun agbara
11. Double Turbo Anodized Pro Soleplate
12. Italologo konge

Ṣeto

Ṣiṣi silẹ

• Fara yọ irin ati gbogbo awọn ẹya ẹrọ kuro ninu apoti.
• Remove any protective films or stickers from the soleplate or body of the iron.
• Ṣe idaduro apoti fun ibi ipamọ iwaju tabi gbigbe.

Àgbáye Omi ojò

• Rii daju pe irin ti yọ kuro lati iṣan agbara.
• Set the steam control dial to the "Dry Ironing" or "No Steam" position.
• Ṣii ideri iwọle ti nkún omi.
• Using a measuring cup, slowly pour clean tap water into the water tank up to the "MAX" fill line. Do not overfill.
• Pa ideri agbawole omi ti o kun ni aabo.

Image: A person demonstrating how to fill the water tank of the iron using a measuring cup, ensuring not to exceed the maximum fill line.

Lilo akọkọ

• Before first use, or if the iron has not been used for a long time, iron an old piece of fabric to ensure no residue or impurities are transferred to your garments.
• Some odor or slight smoke may occur during the first heating; this is normal and will dissipate quickly.

Awọn ilana Iṣiṣẹ

Eto iwọn otutu

• Plug the iron into a suitable 220V electrical outlet.
• Turn the temperature control dial to the desired setting based on the fabric type (e.g., synthetic, silk, wool, cotton, linen). Refer to the fabric care labels on your garments.
• Ina Atọka yoo tan imọlẹ, ti o nfihan irin naa jẹ alapapo. Yoo wa ni pipa nigbati iwọn otutu ti ṣeto ba de.

Aworan: A alaye view of the iron's temperature and steam control dial, showing various settings for different fabric types.

Nya Ironing

• Rii daju pe ojò omi ti kun.
• Set the temperature control to a steam-appropriate setting (usually cotton, linen, or higher). Steam will not be generated at low temperatures.
• Once the iron reaches the set temperature, adjust the steam control dial to the desired steam level (MIN to MAX).
• The integrated automatic water pump ensures continuous steam up to 75g/min.
• For stubborn wrinkles, press the Steam Boost button for a powerful burst of steam (up to 285g/min). Wait a few seconds between bursts.
• The touch sensor on the handle activates steam only when the iron is held, conserving water and energy.

Image: A hand guiding the iron over fabric, with visible steam emanating from the soleplate, demonstrating effective wrinkle removal.

Irin gbigbe

• Ensure the water tank is empty or set the steam control dial to the "Dry Ironing" or "No Steam" position.
• Ṣeto iwọn otutu ni ibamu si iru aṣọ.
• Tẹsiwaju pẹlu fifọ aṣọ bi o ti ṣe deede.

Sisọ Iṣẹ

• The spray function can be used for both steam and dry ironing to dampen abori creases.
• Press the Spray button to release a fine mist of water onto the fabric.

Smart Auto OFF System

• The iron is equipped with a Smart Auto OFF overheat security system.
• If the iron is left stationary on its soleplate for approximately 30 seconds, or on its heel rest for approximately 8 minutes, it will automatically turn off to prevent accidents and save energy.
• To reactivate the iron, simply move it.

Itọju ati Itọju

Regular maintenance will prolong the life of your iron and ensure optimal performance.

Ninu Soleplate

• Rii daju pe irin ti yọọ kuro ati tutu patapata.
• Mu ese apẹrẹ pẹlu ipolowoamp asọ ati ki o kan ti kii-abrasive regede ti o ba wulo.
• Do not use abrasive scourers, harsh chemicals, or metal objects to clean the soleplate, as this can damage the Double Turbo Anodized Pro coating.

Image: The Cecotec iron resting on its heel, providing a clear view of its Double Turbo Anodized Pro soleplate, designed for smooth gliding.

Self-Clean Function (Anti-Calc)

• The iron features an integrated anti-calc system. For additional cleaning, use the self-clean function periodically (e.g., once a month).
• Kun omi ojò si MAX ila.
• Set the steam control to "No Steam" and the temperature to MAX.
• Pulọọgi irin naa ki o duro fun ina atọka lati jade.
• Unplug the iron. Hold the iron horizontally over a sink.
• Press and hold the Self-Clean button. Hot water and steam will be expelled from the soleplate, carrying away mineral deposits.
• Rọra gbọn irin naa sẹhin ati siwaju titi ti ojò omi yoo ṣofo.
• So irin náà padà kí o sì jẹ́ kí ó gbóná kí ó lè gbẹ ẹsẹ̀ rẹ̀.

Ibi ipamọ

• Rii daju pe irin ti yọọ kuro ati tutu patapata.
• Sofo eyikeyi omi ti o ku lati inu ojò.
• Wrap the power cord neatly around the heel rest.
• Store the iron upright on its heel rest in a safe, dry place, out of reach of children.

Laasigbotitusita

Awọn pato

• Awoṣe: Cecotec Fast&Furious 6050 X-Treme
• Agbara: 3100 W
• Voltage: 220 Volts
• Steam Tesiwaju: Titi di 75 g / min
• Igbelaruge Steam: Titi di 285 g / min
• Soplate: Double Turbo Anodized Pro
• Awọn ẹya: Integrated Automatic Water Pump, Smart Auto OFF, Touch Sensor for Steam Control, Anti-Calc System
• Awọn iwọn ọja: 32 x 13.5 x 0.1 cm
• Ìwọ̀n Nkan: 1.39 kg

Atilẹyin ọja ati Support

Cecotec products are manufactured to the highest quality standards. In the unlikely event of a defect arising from faulty materials or workmanship, your product is covered by the standard manufacturer's warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support, spare parts, or warranty inquiries, please contact Cecotec customer service through their official website or the retailer from whom you purchased the product. Do not attempt to repair the appliance yourself.