Ọrọ Iṣaaju
This manual provides detailed instructions for the setup, operation, and maintenance of your FIFINE K040 Wireless Microphone System. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Package Awọn akoonu
The FIFINE K040 Wireless Microphone System package includes the following items:
- 1 x Portable Metal Receiver
- 2 x Handheld Transmitters (Microphones)
- 1 x 1/4" Output Cable
- 1 x Agbara Adapter
- 2 x Anti-rolling Silicone Rings
- Àwọn Ìbòjú Afẹ́fẹ́ 2 x
- Itọsọna olumulo
Ọja Pariview
Olugba
The receiver unit manages the wireless connection and audio output.
Awọn iṣakoso Igbimọ iwaju:
- Bọtini AGBARA: Tan olugba naa tan tabi pa.
- VOL A Knob: Ṣe atunṣe iwọn didun fun Gbohungbohun A.
- VOL B Knob: Ṣe atunṣe iwọn didun fun Gbohungbohun B.
- Ifihan LCD: Shows frequency, channel, and signal indicators for both microphones.
Awọn Isopọ Panel Ihin:
- ÀKÚN DC: So ohun ti nmu badọgba agbara ti a pese nibi.
- ANT-1 / ANT-2: Connect the antennas for signal reception.
- BALANCED-1 (XLR Output for Mic A): Professional audio output for Microphone A.
- BALANCED-2 (XLR Output for Mic B): Professional audio output for Microphone B.
- MIX OUT (1/4" Mix Output): Combined audio output for both microphones.
Handheld Microphones (Transmitters)
The system includes two handheld dynamic microphones.
- Iboju LCD: Displays current frequency and battery status.
- Bọtini agbara: Turns the microphone on or off.
- Ṣeto Bọtini: Used to change frequencies.
- Abala Batiri: Requires 2 x AA batteries (not included) for each microphone.
Awọn ilana iṣeto
- Install Antennas: Screw the two antennas onto the ANT-1 and ANT-2 connectors on the rear of the receiver. Ensure they are securely attached and positioned vertically for optimal signal reception.
- Agbara fun olugba: Connect the power adapter to the DC INPUT on the receiver and plug it into a power outlet. Press the POWER button to turn on the receiver.
- Fi Awọn Batiri sinu Awọn Gbohungbohun: Open the battery compartment of each handheld microphone and insert 2 x AA batteries, observing correct polarity.
- Sopọ si Eto Olohun:
- Using 1/4" Mix Output: Connect the provided 1/4" output cable from the MIX OUT port on the receiver to the input of your amplifier, mixer, or PA system. This combines the audio from both microphones into a single output.
- Using XLR Outputs: For separate control of each microphone, connect XLR cables (not included) from BALANCED-1 (Mic A) and BALANCED-2 (Mic B) to individual XLR inputs on your mixer.
- Connecting to TV (via Ampolutọpa): If connecting to a TV, ensure your TV's audio output is connected to an audio amplifier, and then connect the FIFINE K040 receiver to the amplifier as described above.
Image: Diagram showing the FIFINE K040 receiver connected to an amplifier using the 1/4" Mix Output cable. 
Image: Diagram illustrating the connection of the FIFINE K040 receiver to an audio mixer using XLR cables for individual microphone outputs. 
Image: Diagram showing how to connect the FIFINE K040 receiver to a TV through an audio amplifier. - Agbara Lori Awọn gbohungbohun: Press and hold the power button on each microphone until the LCD screen illuminates. The microphones should automatically pair with the receiver.
- Ṣatunṣe Iwọn didun: Use the VOL A and VOL B knobs on the receiver to set the desired output volume for each microphone.
Awọn ilana Iṣiṣẹ
Ensure all components are properly connected and powered on before operation.
- Lilo gbohungbohun: Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound pickup. Avoid covering the microphone grille with your hand.
- Iṣakoso iwọn didun: Adjust the individual volume knobs (VOL A, VOL B) on the receiver to balance the audio levels of each microphone.
- Frequency Selection (If Interference Occurs):
- If you experience interference, you can change the operating frequency of the microphones.
- On the handheld microphone, press the SET button. The frequency on the LCD display will change.
- Olugba yoo muuṣiṣẹpọ laifọwọyi pẹlu igbohunsafẹfẹ titun.
- The system offers 50 selectable UHF frequencies per channel to minimize interference.
- Ibi iṣẹ: The system provides a line-of-sight range of up to 35 meters (115 feet). Obstacles and other wireless devices may reduce this range.
Itoju
- Ninu: Wipe the receiver and microphones with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Rirọpo Batiri: Replace AA batteries in the microphones when the battery indicator on the microphone's LCD screen shows low power. Always use fresh batteries.
- Ibi ipamọ: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place.
- Itọju Antenna: Mu awọn eriali farabalẹ lati ṣe idiwọ atunse tabi ibajẹ.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ohun lati microphones. |
|
|
| kikọlu tabi aimi. |
|
|
| Ohùn alailagbara tabi daru. |
|
|
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | K040 |
| Igbohunsafẹfẹ Iru | UHF (50 selectable frequencies per channel) |
| Awọn ikanni | 2 |
| Gbohungbohun Iru | Amusowo Yiyi |
| Pola Àpẹẹrẹ | Unidirectional |
| Ibiti nṣiṣẹ | Up to 35m / 115ft (line of sight) |
| Abajade olugba | 1/4" Mix Output, 2 x XLR Balanced Outputs |
| Agbara gbohungbohun | 2 x AA batteries (per mic) |
| Agbara olugba | DC Agbara Adaṣe |
| Ohun elo | Irin |
| Ifihan Ibuwọlu-si-Noise | 70 dB |
| Ipalara | 600 ohm |
| Iwọn Nkan | 1 Kilogram (total system) |
| Ọja Mefa | 35 x 27 x 5 cm |
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official FIFINE webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
Olupese: FIFINE Technology
Oluwọle (India): Origin Marketing Pvt Ltd - 9870294946
