1. Ifihan ati Loriview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Awọn ẹya pataki pẹlu:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Ipese Agbara Alagbeka: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- Awọn iṣẹ ina LED: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Eto ati Ibẹrẹ Lilo
2.1 Ngba agbara si Ẹrọ
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Awọn ilana Iṣiṣẹ
3.1 Fo Bibẹrẹ Ọkọ
- Rii daju pe ibẹrẹ fo ti gba agbara ni kikun.
- So smart batiri clamp to the jump starter.
- So pupa (+) clamp sí ibi tí batiri ọkọ̀ náà wà ní ojú ọ̀nà tó dára.
- So dudu (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Bẹrẹ ẹrọ ọkọ ayọkẹlẹ naa.
- Ni kete ti ọkọ ayọkẹlẹ ba bẹrẹ, yọ cl naa kuro lẹsẹkẹsẹamps from the vehicle battery, then disconnect the smart battery clamp lati ibẹrẹ fo.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Lilo Afẹ́fẹ́ Konpireso
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Lilo bi Bank Power
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- Okun USB 1: 5V=3A, 9V=2A, 12V=1.5A
- Okun USB 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 LED Light Functions
The device includes multiple LED light modes:
- Imọlẹ Iduroṣinṣin: Fun itanna gbogbogbo.
- Ipo SOS: Fun ifihan agbara pajawiri.
- Imọlẹ Strobe: Fún fífàfiyèsí.
Tẹ bọtini ina lati yipo nipasẹ awọn ipo oriṣiriṣi.
4. Itọju
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Gbigba agbara deede: Tun agbara ẹrọ naa gba ni gbogbo oṣu mẹta si mẹfa, paapaa ti ko ba si ni lilo, lati ṣetọju ilera batiri.
- Ibi ipamọ: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Ninu: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Ayẹwo USB: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Laasigbotitusita
Tọkasi tabili ni isalẹ fun awọn ọran ti o wọpọ ati awọn ojutu wọn:
| Ifiranṣẹ aṣiṣe | Nitori | Ojutu |
|---|---|---|
| Asise | Jumper cables connected with reversed polarity to the car battery. | So batiri pọ clamps to the correct positive and negative terminals. |
| LỌWỌ | Batiri ọkọ ayọkẹlẹ ti a ti sopọ ni deede, ṣugbọn batiri voltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| Jade IN | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| BERE | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| BERE | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Awọn pato
Detailed technical specifications for the Enthuze ENT-TD6000:
| Paramita | Iye |
|---|---|
| Orukọ ọja | Lọ Starter pẹlu Air konpireso |
| Awoṣe | ENT-TD6000 |
| Iwọn | 193 x 110 x 53mm |
| Iwọn Iwọn titẹ | 0.2-8bar / 3-120psi |
| Awọn iwọn otutu ti nṣiṣẹ | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Ibi ipamọ otutu | -10°C ~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Agbara Batiri | 41.44Wh (14.8V, 2.8Ah) |
| Ariwo Ṣiṣẹ | Kere ju 80dB kuro lati 1 mita |
| Gbigba agbara Input | 5V=3A |
| Akoko gbigba agbara | Nipa awọn wakati 3.5 |
| Ṣiṣejade USB 1 | 5V=3A, 9V=2A, 12V=1.5A |
| Ṣiṣejade USB 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1psi |
| Bẹrẹ ọkọ ayọkẹlẹ Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Awọn Ikilọ Abo pataki
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Gba agbara si batiri inu nikan ni agbegbe ti o ni afẹfẹ daradara.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Ewu ti Ifarapa si Eniyan. Ma ṣe lo ọja yii ti okun agbara tabi awọn kebulu batiri ba bajẹ ni ọna eyikeyi.
- Ẹrọ yii ko ṣe ipinnu fun lilo ni ile-iṣẹ atunṣe iṣowo.
- Ẹrọ yii jẹ ipinnu lati wa ni ipamọ ninu ile nigbati ko si ni lilo. Ẹrọ yii ko ni ipamọ tabi fi silẹ ni ita nigbati ko si ni lilo.
- Ẹrọ yii jẹ ipinnu fun lilo igba diẹ ni ita ati pe o yẹ ki o lo itọju ti o yẹ nigba lilo ẹrọ ni awọn ipo tutu.
8. Atilẹyin ọja ati Support
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
