Futaba 6K V3S Radio System User Manual

1. Ifihan

Welcome to the user manual for your new Futaba 6K V3S Radio System. This comprehensive guide provides essential information for setting up, operating, and maintaining your Futaba 6K V3S transmitter and R3008SB receiver. Please read this manual thoroughly before using your radio system to ensure safe and optimal performance.

2. Ọja Ipariview

The Futaba 6K V3S is an advanced 8-channel radio system designed for various RC applications, including airplanes, helicopters, and multicopters. It features T-FHSS and S-FHSS modulation compatibility, offering reliable and precise control.

Nọmba 2.1: Futaba 6K V3S Transmitter and R3008SB Receiver. The image shows the black Futaba T6K transmitter with its display screen and control sticks, alongside the compact R3008SB receiver connected by wires.

Awọn ẹya pataki:

• 15 Model Memory: Store settings for up to 15 different models.
• Voice Telemetry Function: Receive audible alerts and information.
• Digital Trims: Precise trim adjustments with value saving.
• Adjustable Servo End-Point (ATV/EPA): Customize servo travel limits.
• Exponential Function (EXP): Fine-tune control stick response.
• 4 Switches / 1 Potentiometer: Versatile control options.
• Adjustable Fail-Safe: Programmable fail-safe for channels 1-6.
• T-FHSS / S-FHSS Modulation: Compatible with a wide range of Futaba receivers.
• Chronometer (Timer): Integrated timer function.
• Trainer Mode: For learning and instruction.
• Servo Monitor: View real-time servo positions.
• Adjustable Battery Alarm: Customizable low voltage titaniji.
• Audible and Vibrating Alarms: Multiple alert types for critical information.
• S-BUS Port: For simplified wiring with S-BUS compatible servos and devices.

R3008SB Receiver Features:

• 2.4GHz T-FHSS Telemetric Receiver.
• 8 PWM Channels: Standard servo outputs.
• Programmable Channel 8: Can be configured as an SBUS port, supporting up to 10 SBUS servos.
• SBUS 2 Port: For connecting telemetry sensors and probes.
• Afikun Voltage Port: Dedicated port for connecting a voltage sensọ.

3. Eto

3.1 Ni ibẹrẹ Oṣo

1. Fifi sori batiri: Ensure the correct battery type (as specified by Futaba) is installed in the transmitter. Observe polarity.
2. Gbigba agbara: Fully charge the transmitter battery before first use.
3. Ibi olugba: Mount the R3008SB receiver securely in your model, ensuring antennas are positioned for optimal signal reception. Avoid placing the receiver near high-current components or metal objects.

3.2 Ìsopọ̀ pẹ̀lú Olùgbà

To establish communication between the transmitter and receiver, they must be bound. Refer to the detailed binding procedure in the full Futaba 6K V3S manual for specific steps. Generally, this involves putting both the transmitter and receiver into bind mode.

4. Awọn ilana Iṣiṣẹ

4.1 Ipilẹ isẹ

• Titan/Apapa: Use the power switch to turn the transmitter on or off. Always turn on the transmitter before the model and turn off the model before the transmitter.
• Stick Controls: Familiarize yourself with the throttle, aileron, elevator, and rudder stick movements.
• Lilọ kiri akojọ aṣayan: Use the navigation buttons and scroll wheel (if present) to access and adjust settings on the LCD screen.

4.2 Model Programming

The 6K V3S offers extensive programming capabilities for various model types:

Airplane Modes:

• Program Mixes (2 available)
• Flaperon Trim
• Flaperon/Differential Mix
• V-Tail Mix
• Delta Mix
• Selectable 2nd Aileron Output (Channels 3, 4, 5, or 6)

Helicopter Functions:

• 5-Point Throttle Curve (Throttle Priority 1)
• Aifọwọyi
• Hover Pitch Adjustment
• 5-Point Pitch Curve (Throttle Priority 1+2)
• Pitch / Tail Rotor Mix
• Swashplate/Pitch Mix
• Gyro Sensitivity Adjustment Menu
• Swashplate Mix Devices: H1, HR3 (CCPM 120°), H3 (CCPM 90°), HE3

Multicopter Functions:

• Multiple Flight Modes
• Oṣuwọn Meji
• Throtle Tẹ
• Throttle Delay
• Gyro Sensor Integration

4.3 Telemetry and Sensors

The R3008SB receiver supports telemetry, allowing real-time feedback from your model. Connect compatible Futaba telemetry sensors to the SBUS 2 port to monitor parameters such as battery voltage (via the "extra voltage" port), temperature, and RPM. The transmitter can provide voice and vibrating alerts based on telemetry data.

5. Itọju

• Ninu: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or abrasive cleaners.
• Ibi ipamọ: Store the radio system in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Itọju Batiri: Follow the manufacturer's guidelines for charging and discharging batteries to prolong their lifespan.

6. Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Ko si Agbara: Check battery installation and charge level. Ensure the power switch is fully engaged.
• Ko si Idahun Iṣakoso: Verify that the transmitter and receiver are properly bound. Check servo connections and power to the receiver.
• Erratic Servo Movement: Check for interference sources. Ensure all connections are secure.
• Itaniji Batiri: Recharge or replace the transmitter battery. Check the voltage sensor connection if using telemetry.
• Telemetry Data Missing: Ensure telemetry sensors are correctly connected to the SBUS 2 port and configured in the transmitter.

For more complex issues, consult the full Futaba 6K V3S manual or contact Futaba customer support.

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation included with your product or visit the official Futaba website. For technical support, troubleshooting assistance, or spare parts inquiries, please contact Futaba customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Olupese: Futaba