Ìwé Ìtọ́sọ́nà Olùlò Cecotec QUITAPELUSAS Cut-X 4500 Textile Lint Remover

Awọn Itọsọna Aabo pataki

Please read these instructions carefully before using the appliance and keep them for future reference. Failure to follow these instructions may result in accidents or damage to the product.

• Pa ohun elo naa kuro ni arọwọto awọn ọmọde.
• Maṣe fi ohun elo naa bọ inu omi tabi omi miiran.
• Ensure the appliance is switched off before cleaning or when not in use.
• Do not use the appliance on wet fabrics.
• Avoid pressing the appliance too hard against the fabric to prevent damage.
• Do not use if the blade cover or blades are damaged.
• Only use the provided cleaning brush for maintenance.
• This appliance contains a rechargeable battery. Do not expose to extreme temperatures or direct sunlight.

Ọja Pariview

The Cecotec QUITAPELUSAS Cut-X 4500 is designed to efficiently remove lint and pilling from various textile types, restoring the appearance of your garments.

Awọn eroja:

• Fila Idaabobo: Covers the blade area when not in use.
• Akoj Irin: Features 3 different size holes to capture various lint sizes.
• Awọn abẹfẹlẹ Irin Alagbara: Extra-strong blades for effective lint removal.
• Lint Container: Transparent container to collect removed lint.
• Tan/Pa Yipada: Ó ń mú kí ẹ̀rọ náà ṣiṣẹ́, ó sì ń mú kí ó má ​​ṣiṣẹ́.
• Ibudo gbigba agbara: Fun gbigba agbara ti abẹnu batiri.
• Ninu Fẹlẹ: For maintaining the blades and grid.

Image: The Cecotec Cut-X 4500 lint remover shown with its cleaning brush, highlighting its compact design.

Eto ati gbigba agbara

Gbigba agbara akọkọ:

1. Kí o tó lo ó fún ìgbà àkọ́kọ́, gba agbára ìyọkúrò lint náà pátápátá.
2. Connect the charging cable to the charging port on the device and to a suitable power source.
3. The charging indicator light will illuminate (if present) to show it is charging.
4. A full charge provides approximately 45 minutes of cordless operation.

Ngbaradi fun Lilo:

• Rí i dájú pé a ti gba agbára gbogbo ohun èlò ìyọkúrò lint náà.
• Remove the protective cap from the metal grid.
• Verify that the lint container is empty and securely attached.

Awọn ilana Iṣiṣẹ

Using the Lint Remover:

1. Lay the garment flat on a hard, smooth surface. Ensure the fabric is taut.
2. Switch on the appliance using the On/Off switch.
3. Gently glide the metal grid over the pilled or lint-covered area of the fabric. Do not apply excessive pressure.
4. Move the lint remover in small, circular motions or straight strokes.
5. The adjustable head adapts to different fabric types, ensuring gentle care.
6. Observe the lint container; empty it when it becomes full to maintain optimal performance.
7. After use, switch off the appliance and replace the protective cap.

Image: A user demonstrating the lint remover on a sweater sleeve, showing its ergonomic design for comfortable use.

Eto Abo:

The device features an integrated safety system that automatically disables operation if the blade cover or lint container is not properly secured. This prevents accidental contact with the blades.

Itọju ati Cleaning

Regular cleaning ensures the longevity and optimal performance of your lint remover.

Emptying the Lint Container:

1. Rii daju pe ohun elo ti wa ni pipa.
2. Carefully detach the lint container by sliding or twisting it off (refer to product diagram for specific mechanism).
3. Tú àwọn àpò tí a kó jọ sínú àpótí ìdọ̀tí.
4. Reattach the lint container securely until it clicks into place.

Image: A user demonstrating how to detach the transparent lint container for emptying.

Cleaning the Blades and Grid:

1. Switch off the appliance and ensure it is unplugged if charging.
2. Carefully remove the metal grid by twisting or unscrewing it.
3. Use the provided cleaning brush to gently remove any trapped lint or threads from the blades and the inside of the metal grid.
4. Do not use water or liquid cleaners on the blades or motor unit.
5. Once clean, reattach the metal grid securely.

Image: The included cleaning brush being used to clear lint from the blades and internal mechanism of the lint remover.

Aworan: A alaye view of the lint remover's metal grid and blades, illustrating its effectiveness in removing lint.

Laasigbotitusita

Awọn pato

• Awoṣe: 05748
• Brand: Cecotec
• Awọn iwọn: 6.3"D x 2.95"W x 3.74"H (16 x 9.5 x 7.5 cm)
• Ohun elo: Metal (Blades, Grid), Plastic (Body)
• Àwọ̀: Darkinox
• Igbesi aye batiri: Up to 45 minutes (rechargeable)
• Iyara abẹfẹlẹ: Up to 8800 revolutions per minute
• Opin Abẹfẹ: 50mm
• Ìwúwo: 10.6 iwon (isunmọ 300g)
• Ipo isẹ: Laifọwọyi

Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Cecotec webojula.

Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.