Anern 3500W Solar Hybrid Inverter

1. Ifihan

The Anern SCI02-PLUS 3500W Solar Hybrid Inverter is an advanced power solution integrating a 100A MPPT solar charge controller. It is designed to provide high-quality, stable AC power from 48V DC sources, suitable for various household and office appliances. This inverter supports multiple charging modes and is compatible with lead-acid, gel, and lithium batteries, ensuring optimized battery performance and extended lifespan.

olusin 1: Iwaju view of the Anern 3500W Solar Hybrid Inverter.

2. Alaye Aabo

Please read and understand all safety instructions before installation and operation to prevent damage to the inverter or connected devices.

• The starting power of electrical appliances with inductive loads must be at least three times the rated power of the appliances. If the starting power exceeds the inverter's capacity, the inverter may be damaged. Please select an appropriate model before purchase.
• Connect the circuit according to the instructions and install switches for each circuit.
• Ilana Ibẹrẹ: First, turn on the battery switch, then start the inverter, and finally turn on the PV, grid, and load switches.
• Ilana tiipa: Turn off the load, PV, and grid switches, then turn off the inverter, and finally turn off the battery.

3. Ọja Ipariview ati Awọn ẹya ara ẹrọ

The Anern SCI02-PLUS inverter is designed for high efficiency and versatility, offering robust power conversion and management capabilities.

Awọn ẹya pataki:

• Ijade Sine Wave Pure: Provides high-quality, stable AC power to protect electronic products and extend their lifespan.
• Olùdarí Àkójọpọ̀ Oòrùn MPPT tí a ṣepọ: Features a 100A MPPT controller for efficient solar energy harvesting.
• Ibamu Batiri gbooro: Suitable for lead-acid, gel, and lithium batteries.
• Abojuto latọna jijin: Supports WIFI/GPRS remote monitoring (WIFI module sold separately) for convenient data access and control.
• Awọn ọna gbigba agbara lọpọlọpọ: Offers four optional charging modes: Solar, Utility Priority, Solar Priority, and Utility/Solar Hybrid charging.
• Intelligent Battery Charging System: Optimizes battery performance and extends battery life.
• Aabo ti o ni kikun: Includes overload, over-temperature, and short-circuit protection, along with a cold start function.

Olusin 2: Pariview of the inverter's key features.

Figure 3: Inverter display, LED indicators, and function buttons.

4. Eto ati fifi sori

Proper installation is crucial for the safe and efficient operation of your hybrid inverter. Ensure all connections are secure and follow local electrical codes.

Itumọ eto:

The inverter can be integrated into a comprehensive solar power system, connecting solar panels, external battery packs, and utility power to supply household appliances.

Figure 4: Basic system architecture showing connections for solar, generator/utility, battery, and loads.

Awọn igbesẹ fifi sori ẹrọ:

1. Iṣagbesori: Fi sori ẹrọ inverter ni agbegbe ti o ni afẹfẹ daradara, kuro lati oorun taara ati ọrinrin.
2. Asopọ batiri: Connect the external battery pack to the inverter. Ensure correct polarity. For 3.5KW models, use a 24V battery; for 5.5KW models, use a 48V battery. The battery capacity should not be less than 100AH.
3. Isopọmọ igbimọ oorun: Connect your solar panels to the PV input. The recommended voltage for normal startup is 300V-400V, not exceeding 500V. For PLUS-3.5KW, the solar panel power should not exceed 5KW.
4. Ìwọlé AC (Ilo/Ẹ̀rọ-ẹ̀rọ-ìmúṣiṣẹ́): So àkójọpọ̀ ìlò tàbí ẹ̀rọ amúṣẹ́dá mọ́ àwọn ebute AC input.
5. Ìjáde AC (Àwọn ẹrù): Connect your household or office appliances to the AC output terminals.
6. Ilẹ: Rii daju pe ẹrọ oluyipada ti wa ni ilẹ daradara.
7. Agbara Tan: Follow the startup sequence: Battery switch ON → Inverter ON → PV, Grid, Load switches ON.

Olusin 5: Examples of inverter installation in a solar power system.

5. Awọn ọna ṣiṣe

The inverter offers four distinct charging modes to suit various energy management needs:

• Gbigba agbara Oorun: Prioritizes charging from solar panels.
• Utility Priority Charging: Prioritizes charging from the utility grid.
• Solar Priority Charging: Prioritizes using solar power for loads and charging, switching to utility only when solar is insufficient.
• Gbigba agbara arabara: Combines solar and utility charging for optimal efficiency.

Figure 6: Diagram illustrating the four optional charging modes.

Remote Monitoring (Optional):

With an optional WIFI module, you can monitor and control your inverter remotely via a mobile application or web interface, accessing real-time data and adjusting settings.

Figure 7: WIFI monitoring setup for remote access.

6. Itọju

Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti oluyipada rẹ.

• Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
• Rii daju pe fentilesonu to dara ni ayika ẹyọ naa lati ṣe idiwọ igbona.
• Lokọọkan ṣayẹwo gbogbo awọn asopọ itanna fun wiwọ ati awọn ami ti ibajẹ.
• Monitor the display for any error codes or unusual readings.
• Inspect batteries regularly for any signs of damage or leakage.

7. Laasigbotitusita

Abala yii n ṣalaye awọn ibeere ti o wọpọ ati awọn ọran ti o le ba pade.

Awọn ibeere Nigbagbogbo:

• Q: How many solar panels should be connected?
  A: To start the inverter normally, a voltage of 300V-400V is recommended, not exceeding 500V. For PLUS-3.5KW, the solar panel power should not exceed 5KW. For example, 10 pieces of 250W 30V solar panels connected in series.
• Q: Can inverters be connected in series or parallel?
  A: No, this model does not support series or parallel connection.
• Q: Is this a grid-tied inverter? Can it be connected to the power grid?
  A: No. It can be fed from the grid (utility input), but it cannot feed power back into the grid.
• Q: Does the inverter need to be connected to a battery?
  A: The inverter can operate without a battery, but in this case, the solar panel voltage must exceed 360Vdc.
• Q: What types of batteries can be used?
  A: Lead-acid batteries, gel batteries, and lithium batteries can be used. A 24V battery is required for the 3.5KW model, and a 48V battery for the 5.5KW model. The battery capacity should not be less than 100AH.

8. Awọn pato

Detailed technical specifications for the Anern SCI02-PLUS 3500W Solar Hybrid Inverter.

Àwòrán 8: Àwọn ìlànà ìmọ̀-ẹ̀rọ tó péye.

9. Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries, please contact Anern customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can often find support information on the official Anern webaaye tabi nipasẹ alagbata ti o ti ra ọja naa.