Ọrọ Iṣaaju
Thank you for choosing the CaDA C51043W Technics Buggy Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your remote control car. Please read this manual thoroughly before use to ensure proper function and safety.
Ọja Pariview
The CaDA C51043W is a 522-piece building block set designed to construct an all-terrain remote control buggy. It features a 2.4 GHz 4-channel remote control system, a suspension system, and a high-horsepower motor for dynamic performance. The assembled model is compatible with Lego Technic components.
Figure 1: Assembled CaDA C51043W Technics Buggy with its remote control.
Package Awọn akoonu
Daju pe gbogbo awọn paati ti a ṣe akojọ si isalẹ wa ninu package rẹ:
- 1 x Spare parts pack (522 building blocks)
- 1 x Isakoṣo latọna jijin
- 1 x Ìwé ìtọ́nisọ́nà olùlò (ìwé yìí)
- 1 x Battery pack (JV1010/7.4V Lithium battery)
- 1 x okun gbigba agbara USB
- 1 x Servo motor
- 1 x L motor
Olusin 2: Pariview of the main components included in the package, such as the remote control, motors, battery box, and USB cable.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | C51043W |
| Nọmba ti Awọn nkan | 522 |
| Ohun elo | Plastic + Hard parts |
| Latọna Iṣakoso Igbohunsafẹfẹ | 2.4 GHz |
| Isakoṣo latọna jijin | O fẹrẹ to awọn mita 25 |
| Iyara ti o pọju | 4.1 km / h |
| Akoko Lilo | 30 iṣẹju |
| Akoko gbigba agbara | 4-6 hours (First charge: 8 hours) |
| Batiri ọkọ ayọkẹlẹ | JV1010/7.4V Lithium battery |
| Latọna Iṣakoso Batiri | 2 x AAA JV8011/1.5V batteries (not included) |
| Iwọn Ọja | 1280 giramu |
| Awọn iwọn ti a kojọpọ (L x W x H) | Isunmọ. 34.7 x 20.8 x 13.5 cm (13.75 x 8.2 x 5.3 inches) |
Figure 3: Key dimensions of the assembled buggy.
Ṣeto
1. Apejọ
Follow the included intuitive instruction manual for step-by-step assembly. The pieces are packed in numbered bags to simplify the building process. Ensure all connections are secure.
olusin 4: Iwaju-ẹgbẹ view of the fully assembled buggy.
2. Fifi sori batiri ati gbigba agbara
- Batiri ọkọ ayọkẹlẹ: Install the JV1010/7.4V Lithium battery pack into the designated compartment in the buggy. Connect it securely.
- Gbigba agbara: Use the provided USB charging cable to charge the car's battery. The first charge should be approximately 8 hours. Subsequent charges will take 4-6 hours. Do not overcharge.
- Batiri Iṣakoso Latọna jijin: Insert 2 x AAA JV8011/1.5V batteries (not included) into the remote control. Ensure correct polarity.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
- Turn on the power switch on the buggy.
- Turn on the power switch on the remote control.
- The remote control and buggy should automatically pair. If not, refer to the troubleshooting section.
2. Awọn iṣakoso ipilẹ
The 4-channel remote control allows for precise movement:
- Siwaju/Sẹhin: Use the left joystick to move the buggy forward or backward.
- Yíyí Òsì/Ọ̀tún: Use the right joystick to steer the buggy left or right.
- Awọn imọlẹ: The remote control may have a button to control the buggy's lights.
Figure 5: The buggy with its headlights on, ready for operation.
3. Àwọn ìmọ̀ràn nípa ìwakọ̀
- Operate on flat, clear surfaces for optimal performance.
- Avoid water, sand, or excessively dusty environments to prevent damage to electronic components.
- Practice gentle steering and acceleration to master control.
Itoju
1. Ninu
Wipe the buggy with a soft, dry cloth after each use to remove dust and debris. Do not use water or chemical cleaners.
2. Ibi ipamọ
Store the buggy and remote control in a cool, dry place away from direct sunlight. Remove batteries from the remote control if storing for extended periods.
3. Itọju batiri
- Always fully charge the car battery before use.
- Ma ṣe fi awọn batiri silẹ ni gbigba agbara lairi.
- If the battery is damaged or leaking, discontinue use immediately and dispose of it properly.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Buggy does not respond to remote control. | Low battery in buggy or remote control; Not paired; Out of range. | Charge buggy battery; Replace remote control batteries; Ensure buggy and remote are powered on and within 25m range. |
| Buggy moves slowly or inconsistently. | Low buggy battery; Obstruction in wheels/gears. | Charge buggy battery; Check for and remove any obstructions. |
| Awọn imọlẹ ko ṣiṣẹ. | Loose connection; Damaged LED. | Check wiring connections for the lights; Contact support if damaged. |
Atilẹyin ọja ati Support
Each piece of this product undergoes quality inspection before shipment. If any part is missing or defective upon arrival, please circle the missing part in the instruction manual and send a picture to our customer support for a free replacement. Please retain your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided on the product packaging or the official CaDA webojula.
